Hi,
Using hostapd from git. I have the same thing happening with both
wirelees-testing and linux-2.6.30-rc6
Scenario 1:
eth0 bridged to wlan0_0. all traffic works with no problems. Ping
and Lots of traffic between interfaces works fine.
Scenario 2:
eth0 bridged to wlan0_0 in one subnet. Then en eth1 I have another
subnet, i route between subnets. I can ping between subnets to for a
while. I can not copy a large file, iperf also fails. At some point
hostapd stops sending beacons and ther is no traffic. It seems to
respond to probe requests.
STA 00:90:4b:69:0f:55 sent probe request for broadcast SSID
MGMT (TX callback) ACK
mgmt::proberesp cb
STA 00:0e:35:f0:76:42 sent probe request for broadcast SSID
MGMT (TX callback) ACK
mgmt::proberesp cb
STA 00:0e:35:f0:76:42 sent probe request for broadcast SSID
MGMT (TX callback) ACK
mgmt::proberesp cb
Checking STA 00:1c:bf:51:63:34 inactivity:
Station has been active
Checking STA 00:1c:bf:51:63:34 inactivity:
Polling STA with data frame
Checking STA 00:1c:bf:51:63:34 inactivity:
Sending disassociation info to STA 00:1c:bf:51:63:34
nl_set_encr: ifindex=6 alg=0 addr=0x5c298 key_idx=0 set_tx=1 seq_len=0
key_len=0
addr=00:1c:bf:51:63:34
Sending deauthentication info to STA 00:1c:bf:51:63:34
nl_set_encr: ifindex=6 alg=0 addr=0x5c298 key_idx=0 set_tx=1 seq_len=0
key_len=0
addr=00:1c:bf:51:63:34
nl80211: Set beacon (beacon_set=1)
WPA: group state machine entering state SETKEYS (VLAN-ID 0)
GMK - hexdump(len=32): [REMOVED]
GTK - hexdump(len=32): [REMOVED]
wpa_group_setkeys: GKeyDoneStations=0
WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0)
nl_set_encr: ifindex=6 alg=2 addr=(nil) key_idx=2 set_tx=1 seq_len=0
key_len=32
Senario 3:
Same as senario 2 but NAT instead of route.
eth0 bridged to wlan0_0 in one subnet. Then en eth1 I have another
subnet, I NAT/ MASQUERADE between subnets. I can ping between subnets
to for a while. I can not copy a large file, iperf also fails. At
some point hostapd stops sending beacons and there is no traffic. It
seems to respond to probe requests.
Hostapd configuration:
interface=wlan0_0
bridge=br0
driver=nl80211
logger_syslog=-1
logger_syslog_level=2
logger_stdout=0
logger_stdout_level=2
dump_file=/tmp/hostapd/hostapd.0.dump
ssid=karl
channel=1
hw_mode=g
auth_algs=1
macaddr_acl=0
accept_mac_file=/tmp/hostapd/hostapd.wlan0_0.accept
deny_mac_file=/tmp/hostapd/hostapd.wlan0_0.deny
ignore_broadcast_ssid=0
wpa=3
wpa_passphrase=hiramoto
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP CCMP
ieee8021x=0
eap_server=0
Any ideas on where the problem could be?
Thanks.
--
Karl.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
