On Thu, 2009-04-02 at 15:36 -0500, Larry Finger wrote: > > In drivers/leds/led-triggers.c in led_trigger_show you have > > > > list_for_each_entry(trig, &trigger_list, next_trig) { > > + printk(KERN_DEBUG "available trigger: %s\n", trig->name); > > if (led_cdev->trigger && !strcmp(led_cdev->trigger->name, > > trig->name)) > > len += sprintf(buf+len, "[%s] ", trig->name); > > else > > len += sprintf(buf+len, "%s ", trig->name); > > } > > > > could you do the modification, with a kernel that has the TRIG_NAME_MAX > > set to 50, and see what it prints? I'm completely confused by this > > failure mode since the garbage you get is actually put into brackets, so > > it seems the strcmp() is returning 0 which seems odd. > > Have I told you that I hate things that appear to be intermittent? I share that feeling. > I added the printk, returned TRIG_NAME_MAX to 50, rebuilt and rebooted. This > time I got > > ~/wireless-testing> cat /sys/class/leds/b43legacy-phy0\:\:rad/trigger > none ide-disk ADP1-online BAT0-charging-or-full BAT0-charging BAT0-full phy0rx > phy0tx phy0assoc phy0radio [rfkill0] > ~/wireless-testing> dmesg | grep available > available trigger: ide-disk > available trigger: ADP1-online > available trigger: BAT0-charging-or-full > available trigger: BAT0-charging > available trigger: BAT0-full > available trigger: phy0rx > available trigger: phy0tx > available trigger: phy0assoc > available trigger: phy0radio > available trigger: rfkill0 > > I'll leave the printk in place for the moment. Fun. > The name is being truncated by "#define BUS_ID_SIZE 20" in > include/linux/device.h. As changing that define would be pretty invasive, I plan > to use a shorter name when the LED is registered. > > The bad news is that the set brightness callback routine is still not being > called even though I tried BUS_ID_SIZE of 30.. Ah, yes. Using a shorter name is probably a good idea then. I don't think changing that define makes too much sense. On my test with iwlwifi the rfkill LED trigger is definitely called -- I cannot pinpoint why it shouldn't be on your setup. :( Actually. Are you positive it works without my patch? The confusing this is that this code never seems to call led_trigger_event() outside of rfkill_led_trigger_activate() which is only called once... Can you try this patch please? johannes --- net/rfkill/core.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) --- wireless-testing.orig/net/rfkill/core.c 2009-04-02 22:47:05.000000000 +0200 +++ wireless-testing/net/rfkill/core.c 2009-04-02 22:49:53.000000000 +0200 @@ -83,12 +83,10 @@ static bool rfkill_epo_lock_active; #ifdef CONFIG_RFKILL_LEDS -static void rfkill_led_trigger_activate(struct led_classdev *led) +static void rfkill_led_trigger_event(struct rfkill *rfkill) { - struct rfkill *rfkill; struct led_trigger *trigger; - rfkill = container_of(led->trigger, struct rfkill, led_trigger); trigger = &rfkill->led_trigger; if (rfkill->blocked) @@ -97,6 +95,15 @@ static void rfkill_led_trigger_activate( led_trigger_event(trigger, LED_FULL); } +static void rfkill_led_trigger_activate(struct led_classdev *led) +{ + struct rfkill *rfkill; + + rfkill = container_of(led->trigger, struct rfkill, led_trigger); + + rfkill_led_trigger_event(rfkill); +} + const char *rfkill_get_led_trigger_name(struct rfkill *rfkill) { return rfkill->led_trigger.name; @@ -124,6 +131,10 @@ static void rfkill_led_trigger_unregiste led_trigger_unregister(&rfkill->led_trigger); } #else +static void rfkill_led_trigger_event(struct rfkill *rfkill) +{ +} + static inline int rfkill_led_trigger_register(struct rfkill *rfkill) { return 0; @@ -158,6 +169,8 @@ static bool __rfkill_set_hw_state(struct *change = prev != blocked; + rfkill_led_trigger_event(rfkill); + return blocked || !!test_bit(RFKILL_BLOCK_SW_BIT, &rfkill->blocked); } @@ -214,6 +227,7 @@ static void rfkill_set_block(struct rfki clear_bit(RFKILL_BLOCK_SW_BIT, &rfkill->blocked); } + rfkill_led_trigger_event(rfkill); rfkill_uevent(rfkill); } @@ -400,6 +414,8 @@ bool rfkill_set_sw_state(struct rfkill * if (prev != blocked && !hwblock) schedule_work(&rfkill->uevent_work); + rfkill_led_trigger_event(rfkill); + return blocked || hwblock; } EXPORT_SYMBOL(rfkill_set_sw_state); -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html