This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections Signed-off-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx> --- TODO * convert toshiba, thinkpad * compile-test tosa conversion * figure out tosa-default LED trigger thing * apply default state to devices after being registered * test Requires the other rfkill patches -- which you can also get at http://johannes.sipsolutions.net/patches/kernel/all/LATEST/ Documentation/rfkill.txt | 637 +++------------------- MAINTAINERS | 6 arch/arm/mach-pxa/tosa-bt.c | 30 - arch/arm/mach-pxa/tosa.c | 1 drivers/net/wireless/ath9k/ath9k.h | 7 drivers/net/wireless/ath9k/main.c | 115 +--- drivers/net/wireless/ath9k/pci.c | 15 drivers/net/wireless/b43/Kconfig | 2 drivers/net/wireless/b43/leds.c | 2 drivers/net/wireless/b43/main.c | 4 drivers/net/wireless/b43/phy_a.c | 4 drivers/net/wireless/b43/phy_common.c | 17 drivers/net/wireless/b43/phy_common.h | 4 drivers/net/wireless/b43/phy_g.c | 4 drivers/net/wireless/b43/phy_lp.c | 2 drivers/net/wireless/b43/phy_n.c | 2 drivers/net/wireless/b43/rfkill.c | 120 +--- drivers/net/wireless/b43/rfkill.h | 5 drivers/net/wireless/b43legacy/Kconfig | 2 drivers/net/wireless/b43legacy/leds.c | 3 drivers/net/wireless/b43legacy/rfkill.c | 116 +--- drivers/net/wireless/b43legacy/rfkill.h | 6 drivers/net/wireless/iwlwifi/Kconfig | 5 drivers/net/wireless/iwlwifi/iwl-rfkill.c | 69 -- drivers/platform/x86/Kconfig | 6 drivers/platform/x86/acer-wmi.c | 50 - drivers/platform/x86/dell-laptop.c | 101 +-- drivers/platform/x86/eeepc-laptop.c | 91 --- drivers/platform/x86/hp-wmi.c | 103 +-- drivers/platform/x86/toshiba_acpi.c | 23 include/linux/Kbuild | 1 include/linux/rfkill.h | 281 +++++++--- include/net/wimax.h | 8 net/rfkill/Kconfig | 14 net/rfkill/Makefile | 4 net/rfkill/core.c | 752 ++++++++++++++++++++++++++ net/rfkill/input.c | 337 +++++++++++ net/rfkill/rfkill-input.c | 392 ------------- net/rfkill/rfkill-input.h | 21 net/rfkill/rfkill.c | 843 ------------------------------ net/rfkill/rfkill.h | 27 net/wimax/op-rfkill.c | 82 -- 42 files changed, 1753 insertions(+), 2561 deletions(-) --- wireless-testing.orig/include/linux/rfkill.h 2009-03-30 11:33:53.000000000 +0200 +++ wireless-testing/include/linux/rfkill.h 2009-03-30 23:47:45.000000000 +0200 @@ -4,6 +4,7 @@ /* * Copyright (C) 2006 - 2007 Ivo van Doorn * Copyright (C) 2007 Dmitry Torokhov + * Copyright 2009 Johannes Berg <johannes@xxxxxxxxxxxxxxxx> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,6 +22,24 @@ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* define userspace visible states */ +#define RFKILL_STATE_SOFT_BLOCKED 0 +#define RFKILL_STATE_UNBLOCKED 1 +#define RFKILL_STATE_HARD_BLOCKED 2 + +/* and that's all userspace gets */ +#ifdef __KERNEL__ +/* don't allow anyone to use these in the kernel */ +enum rfkill_user_states { + RFKILL_USER_STATE_SOFT_BLOCKED = RFKILL_STATE_SOFT_BLOCKED, + RFKILL_USER_STATE_UNBLOCKED = RFKILL_STATE_UNBLOCKED, + RFKILL_USER_STATE_HARD_BLOCKED = RFKILL_STATE_HARD_BLOCKED, +}; +#undef RFKILL_STATE_SOFT_BLOCKED +#undef RFKILL_STATE_UNBLOCKED +#undef RFKILL_STATE_HARD_BLOCKED + #include <linux/types.h> #include <linux/kernel.h> #include <linux/list.h> @@ -30,11 +49,13 @@ /** * enum rfkill_type - type of rfkill switch. - * RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. - * RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. - * RFKILL_TYPE_UWB: switch is on a ultra wideband device. - * RFKILL_TYPE_WIMAX: switch is on a WiMAX device. - * RFKILL_TYPE_WWAN: switch is on a wireless WAN device. + * + * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. + * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. + * @RFKILL_TYPE_UWB: switch is on a ultra wideband device. + * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device. + * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device. + * @NUM_RFKILL_TYPES: number of defined rfkill types */ enum rfkill_type { RFKILL_TYPE_WLAN , @@ -42,97 +63,217 @@ enum rfkill_type { RFKILL_TYPE_UWB, RFKILL_TYPE_WIMAX, RFKILL_TYPE_WWAN, - RFKILL_TYPE_MAX, + NUM_RFKILL_TYPES, }; -enum rfkill_state { - RFKILL_STATE_SOFT_BLOCKED = 0, /* Radio output blocked */ - RFKILL_STATE_UNBLOCKED = 1, /* Radio output allowed */ - RFKILL_STATE_HARD_BLOCKED = 2, /* Output blocked, non-overrideable */ - RFKILL_STATE_MAX, /* marker for last valid state */ -}; +#define RFKILL_BLOCK_HW_BIT 0 +#define RFKILL_BLOCK_SW_BIT 1 /** - * struct rfkill - rfkill control structure. - * @name: Name of the switch. - * @type: Radio type which the button controls, the value stored - * here should be a value from enum rfkill_type. - * @state: State of the switch, "UNBLOCKED" means radio can operate. - * @mutex: Guards switch state transitions. It serializes callbacks - * and also protects the state. - * @data: Pointer to the RF button drivers private data which will be - * passed along when toggling radio state. - * @toggle_radio(): Mandatory handler to control state of the radio. - * only RFKILL_STATE_SOFT_BLOCKED and RFKILL_STATE_UNBLOCKED are - * valid parameters. - * @get_state(): handler to read current radio state from hardware, - * may be called from atomic context, should return 0 on success. - * Either this handler OR judicious use of rfkill_force_state() is - * MANDATORY for any driver capable of RFKILL_STATE_HARD_BLOCKED. - * @led_trigger: A LED trigger for this button's LED. - * @dev: Device structure integrating the switch into device tree. - * @node: Used to place switch into list of all switches known to the - * the system. - * - * This structure represents a RF switch located on a network device. - */ -struct rfkill { - const char *name; - enum rfkill_type type; - - /* the mutex serializes callbacks and also protects - * the state */ - struct mutex mutex; - enum rfkill_state state; - void *data; - int (*toggle_radio)(void *data, enum rfkill_state state); - int (*get_state)(void *data, enum rfkill_state *state); + * struct rfkill_ops - rfkill driver methods + * + * @poll_hw_block: poll the rfkill hardware block state (return true + * for blocked) -- only assign this method when you cannot + * do without polling + * @query_state: query the rfkill hardware block state (return true + * for blocked) -- assign this method if software events might + * cause hardware state changes + * @set_block: turn the transmitter on (blocked == false) or off + * (blocked == true) -- this is called only while the transmitter + * is not hard-blocked. This must be assigned. + */ +struct rfkill_ops { + bool (*poll_hw_block)(void *data); + bool (*query_state)(void *data); + int (*set_block)(void *data, bool blocked); +}; -#ifdef CONFIG_RFKILL_LEDS - struct led_trigger led_trigger; -#endif +/* this is opaque */ +struct rfkill; - struct device dev; - struct list_head node; - enum rfkill_state state_for_resume; -}; -#define to_rfkill(d) container_of(d, struct rfkill, dev) +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) +/** + * rfkill_alloc - allocate rfkill structure + * @name: name of the struct -- the string is not copied internally + * @parent: device that has rf switch on it + * @type: type of the switch (RFKILL_TYPE_*) + * @ops: rfkill methods + * @ops_data: data passed to each method + * + * This function should be called by the transmitter driver to allocate an + * rfkill structure. + */ +struct rfkill * __must_check rfkill_alloc(const char *name, + struct device *parent, + const enum rfkill_type type, + const struct rfkill_ops *ops, + void *ops_data); -struct rfkill * __must_check rfkill_allocate(struct device *parent, - enum rfkill_type type); -void rfkill_free(struct rfkill *rfkill); +/** + * rfkill_register - Register a rfkill structure. + * @rfkill: rfkill structure to be registered + * + * This function should be called by the transmitter driver to register + * the rfkill structure needs to be registered. Before calling this function + * the driver needs to be ready to service method calls from rfkill. + */ int __must_check rfkill_register(struct rfkill *rfkill); + +/** + * rfkill_pause_polling(struct rfkill *rfkill) + * + * Pause polling -- say transmitter is off for other reasons. + * NOTE: not necessary for suspend/resume -- in that case the + * core stops polling anyway + */ +void rfkill_pause_polling(struct rfkill *rfkill); + +/** + * rfkill_resume_polling(struct rfkill *rfkill) + * + * Pause polling -- say transmitter is off for other reasons. + * NOTE: not necessary for suspend/resume -- in that case the + * core stops polling anyway + */ +void rfkill_resume_polling(struct rfkill *rfkill); + + +/** + * rfkill_unregister - Unregister a rfkill structure. + * @rfkill: rfkill structure to be unregistered + * + * This function should be called by the network driver during device + * teardown to destroy rfkill structure. Until it returns, the driver + * needs to be able to service method calls. + */ void rfkill_unregister(struct rfkill *rfkill); -int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state); -int rfkill_set_default(enum rfkill_type type, enum rfkill_state state); +/** + * rfkill_destroy - free rfkill structure + * @rfkill: rfkill structure to be destroyed + * + * Destroys the rfkill structure. + */ +void rfkill_destroy(struct rfkill *rfkill); + +/** + * rfkill_set_hw_state - Set the internal rfkill hardware block state + * @rfkill: pointer to the rfkill class to modify. + * @state: the current hardware block state to set + * + * rfkill drivers that get events when the hard-blocked state changes + * use this function to notify the rfkill core (and through that also + * userspace) of the current state -- they should also use this after + * resume if the state could have changed. + * + * You need not (but may) call this function if poll_state is assigned. + * + * This function can be called in any context. + * + * The function returns the combined block state (true if transmitter + * should be blocked) so that drivers need not keep track of the soft + * block state -- which they cannot anyway because while hard-blocked + * they do not receive soft-block events. + */ +bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked); + +/** + * rfkill_set_sw_state - Set the internal rfkill software block state + * @rfkill: pointer to the rfkill class to modify. + * @state: the current software block state to set + * + * rfkill drivers that get events when the soft-blocked state changes + * (yes, some platforms directly act on input but allow changing again) + * use this function to notify the rfkill core (and through that also + * userspace) of the current state -- they should also use this after + * resume if the state could have changed. + * + * This function can be called in any context. + * + * The function returns the combined block state (true if transmitter + * should be blocked). + */ +bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked); /** - * rfkill_state_complement - return complementar state - * @state: state to return the complement of + * rfkill_set_global_sw_state - set global sw block default + * @type: rfkill type to set default for + * @blocked: default to set + * + * This function sets the global default -- use at boot if your platform has + * an rfkill switch. If not early enough this call may be ignored. * - * Returns RFKILL_STATE_SOFT_BLOCKED if @state is RFKILL_STATE_UNBLOCKED, - * returns RFKILL_STATE_UNBLOCKED otherwise. + * XXX: instead of ignoring -- how about just updating all currently + * registered drivers? */ -static inline enum rfkill_state rfkill_state_complement(enum rfkill_state state) +void rfkill_set_global_sw_state(const enum rfkill_type type, bool blocked); +#else /* !RFKILL */ +static inline struct rfkill * __must_check +rfkill_alloc(const char *name, + struct device *parent, + const enum rfkill_type type, + const struct rfkill_ops *ops, + void *ops_data) +{ + return ERR_PTR(-ENODEV); +} + +static inline int __must_check rfkill_register(struct rfkill *rfkill) +{ + if (rfkill == ERR_PTR(-ENODEV)) + return 0; + return -EINVAL; +} + +static inline void rfkill_pause_polling(struct rfkill *rfkill) +{ +} + +static inline void rfkill_resume_polling(struct rfkill *rfkill) +{ +} + +static inline void rfkill_unregister(struct rfkill *rfkill) { - return (state == RFKILL_STATE_UNBLOCKED) ? - RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED; } +static inline void rfkill_destroy(struct rfkill *rfkill) +{ +} + +static inline bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked) +{ + return blocked; +} + +static inline bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked) +{ + return blocked; +} + +static inline void rfkill_set_global_sw_state(const enum rfkill_type type, + bool blocked) +{ +} +#endif /* RFKILL || RFKILL_MODULE */ + + + /** * rfkill_get_led_name - Get the LED trigger name for the button's LED. * This function might return a NULL pointer if registering of the * LED trigger failed. * Use this as "default_trigger" for the LED. */ -static inline char *rfkill_get_led_name(struct rfkill *rfkill) -{ #ifdef CONFIG_RFKILL_LEDS - return (char *)(rfkill->led_trigger.name); +const char *rfkill_get_led_name(struct rfkill *rfkill); #else +static inline const char *rfkill_get_led_name(struct rfkill *rfkill) +{ return NULL; -#endif } +#endif + +#endif /* __KERNEL__ */ #endif /* RFKILL_H */ --- wireless-testing.orig/drivers/net/wireless/ath9k/main.c 2009-03-30 11:33:53.000000000 +0200 +++ wireless-testing/drivers/net/wireless/ath9k/main.c 2009-03-30 23:28:55.000000000 +0200 @@ -1181,120 +1181,69 @@ static bool ath_is_rfkill_set(struct ath ah->rfkill_polarity; } -/* h/w rfkill poll function */ -static void ath_rfkill_poll(struct work_struct *work) +/* s/w rfkill handlers */ +static int ath_rfkill_set_block(void *data, bool blocked) { - struct ath_softc *sc = container_of(work, struct ath_softc, - rf_kill.rfkill_poll.work); - bool radio_on; - - if (sc->sc_flags & SC_OP_INVALID) - return; - - radio_on = !ath_is_rfkill_set(sc); - - /* - * enable/disable radio only when there is a - * state change in RF switch - */ - if (radio_on == !!(sc->sc_flags & SC_OP_RFKILL_HW_BLOCKED)) { - enum rfkill_state state; - - if (sc->sc_flags & SC_OP_RFKILL_SW_BLOCKED) { - state = radio_on ? RFKILL_STATE_SOFT_BLOCKED - : RFKILL_STATE_HARD_BLOCKED; - } else if (radio_on) { - ath_radio_enable(sc); - state = RFKILL_STATE_UNBLOCKED; - } else { - ath_radio_disable(sc); - state = RFKILL_STATE_HARD_BLOCKED; - } - - if (state == RFKILL_STATE_HARD_BLOCKED) - sc->sc_flags |= SC_OP_RFKILL_HW_BLOCKED; - else - sc->sc_flags &= ~SC_OP_RFKILL_HW_BLOCKED; + struct ath_softc *sc = data; - rfkill_force_state(sc->rf_kill.rfkill, state); - } + if (blocked) + ath_radio_disable(sc); + else + ath_radio_enable(sc); - queue_delayed_work(sc->hw->workqueue, &sc->rf_kill.rfkill_poll, - msecs_to_jiffies(ATH_RFKILL_POLL_INTERVAL)); + return 0; } -/* s/w rfkill handler */ -static int ath_sw_toggle_radio(void *data, enum rfkill_state state) +static bool ath_rfkill_poll_state(void *data) { struct ath_softc *sc = data; + bool ret = !!ath_is_rfkill_set(sc); - switch (state) { - case RFKILL_STATE_SOFT_BLOCKED: - if (!(sc->sc_flags & (SC_OP_RFKILL_HW_BLOCKED | - SC_OP_RFKILL_SW_BLOCKED))) - ath_radio_disable(sc); - sc->sc_flags |= SC_OP_RFKILL_SW_BLOCKED; - return 0; - case RFKILL_STATE_UNBLOCKED: - if ((sc->sc_flags & SC_OP_RFKILL_SW_BLOCKED)) { - sc->sc_flags &= ~SC_OP_RFKILL_SW_BLOCKED; - if (sc->sc_flags & SC_OP_RFKILL_HW_BLOCKED) { - DPRINTF(sc, ATH_DBG_FATAL, "Can't turn on the" - "radio as it is disabled by h/w\n"); - return -EPERM; - } - ath_radio_enable(sc); - } - return 0; - default: - return -EINVAL; - } + if (ret) + ath_radio_disable(sc); + + return ret; } /* Init s/w rfkill */ static int ath_init_sw_rfkill(struct ath_softc *sc) { - sc->rf_kill.rfkill = rfkill_allocate(wiphy_dev(sc->hw->wiphy), - RFKILL_TYPE_WLAN); + sc->rf_kill.ops.set_block = ath_rfkill_set_block; + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + sc->rf_kill.ops.poll_hw_block = ath_rfkill_poll_state; + + snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name), + "ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy)); + + sc->rf_kill.rfkill = rfkill_alloc(sc->rf_kill.rfkill_name, + wiphy_dev(sc->hw->wiphy), + RFKILL_TYPE_WLAN, + &sc->rf_kill.ops, sc); if (!sc->rf_kill.rfkill) { DPRINTF(sc, ATH_DBG_FATAL, "Failed to allocate rfkill\n"); return -ENOMEM; } - snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name), - "ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy)); - sc->rf_kill.rfkill->name = sc->rf_kill.rfkill_name; - sc->rf_kill.rfkill->data = sc; - sc->rf_kill.rfkill->toggle_radio = ath_sw_toggle_radio; - sc->rf_kill.rfkill->state = RFKILL_STATE_UNBLOCKED; - return 0; } /* Deinitialize rfkill */ static void ath_deinit_rfkill(struct ath_softc *sc) { - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); - if (sc->sc_flags & SC_OP_RFKILL_REGISTERED) { rfkill_unregister(sc->rf_kill.rfkill); + rfkill_destroy(sc->rf_kill.rfkill); sc->sc_flags &= ~SC_OP_RFKILL_REGISTERED; - sc->rf_kill.rfkill = NULL; } } static int ath_start_rfkill_poll(struct ath_softc *sc) { - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - queue_delayed_work(sc->hw->workqueue, - &sc->rf_kill.rfkill_poll, 0); - if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) { if (rfkill_register(sc->rf_kill.rfkill)) { DPRINTF(sc, ATH_DBG_FATAL, "Unable to register rfkill\n"); - rfkill_free(sc->rf_kill.rfkill); + rfkill_destroy(sc->rf_kill.rfkill); /* Deinitialize the device */ ath_cleanup(sc); @@ -1655,10 +1604,6 @@ int ath_attach(u16 devid, struct ath_sof goto error_attach; #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - /* Initialze h/w Rfkill */ - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - INIT_DELAYED_WORK(&sc->rf_kill.rfkill_poll, ath_rfkill_poll); - /* Initialize s/w rfkill */ error = ath_init_sw_rfkill(sc); if (error) @@ -2170,10 +2115,8 @@ static void ath9k_stop(struct ieee80211_ } else sc->rx.rxlink = NULL; -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); -#endif + rfkill_pause_polling(sc->rf_kill.rfkill); + /* disable HAL and put h/w to sleep */ ath9k_hw_disable(sc->sc_ah); ath9k_hw_configpcipowersave(sc->sc_ah, 1); --- wireless-testing.orig/drivers/platform/x86/eeepc-laptop.c 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/platform/x86/eeepc-laptop.c 2009-03-30 23:34:32.000000000 +0200 @@ -296,39 +296,15 @@ static int update_bl_status(struct backl * Rfkill helpers */ -static int eeepc_wlan_rfkill_set(void *data, enum rfkill_state state) +static int eeepc_rfkill_set(void *data, bool blocked) { - if (state == RFKILL_STATE_SOFT_BLOCKED) - return set_acpi(CM_ASL_WLAN, 0); - else - return set_acpi(CM_ASL_WLAN, 1); -} - -static int eeepc_wlan_rfkill_state(void *data, enum rfkill_state *state) -{ - if (get_acpi(CM_ASL_WLAN) == 1) - *state = RFKILL_STATE_UNBLOCKED; - else - *state = RFKILL_STATE_SOFT_BLOCKED; - return 0; + unsigned long asl = (unsigned long)data; + return set_acpi(asl, !blocked); } -static int eeepc_bluetooth_rfkill_set(void *data, enum rfkill_state state) -{ - if (state == RFKILL_STATE_SOFT_BLOCKED) - return set_acpi(CM_ASL_BLUETOOTH, 0); - else - return set_acpi(CM_ASL_BLUETOOTH, 1); -} - -static int eeepc_bluetooth_rfkill_state(void *data, enum rfkill_state *state) -{ - if (get_acpi(CM_ASL_BLUETOOTH) == 1) - *state = RFKILL_STATE_UNBLOCKED; - else - *state = RFKILL_STATE_SOFT_BLOCKED; - return 0; -} +static const struct rfkill_ops eeepc_rfkill_ops = { + .set_block = eeepc_rfkill_set, +}; /* * Sys helpers @@ -650,26 +626,17 @@ static int eeepc_hotk_add(struct acpi_de printk(EEEPC_ERR "Error installing notify handler\n"); if (get_acpi(CM_ASL_WLAN) != -1) { - ehotk->eeepc_wlan_rfkill = rfkill_allocate(&device->dev, - RFKILL_TYPE_WLAN); + ehotk->eeepc_wlan_rfkill = rfkill_alloc("eeepc-wlan", + &device->dev, + RFKILL_TYPE_WLAN, + &eeepc_rfkill_ops, + (void *)CM_ASL_WLAN); if (!ehotk->eeepc_wlan_rfkill) goto wlan_fail; - ehotk->eeepc_wlan_rfkill->name = "eeepc-wlan"; - ehotk->eeepc_wlan_rfkill->toggle_radio = eeepc_wlan_rfkill_set; - ehotk->eeepc_wlan_rfkill->get_state = eeepc_wlan_rfkill_state; - if (get_acpi(CM_ASL_WLAN) == 1) { - ehotk->eeepc_wlan_rfkill->state = - RFKILL_STATE_UNBLOCKED; - rfkill_set_default(RFKILL_TYPE_WLAN, - RFKILL_STATE_UNBLOCKED); - } else { - ehotk->eeepc_wlan_rfkill->state = - RFKILL_STATE_SOFT_BLOCKED; - rfkill_set_default(RFKILL_TYPE_WLAN, - RFKILL_STATE_SOFT_BLOCKED); - } + rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, + get_acpi(CM_ASL_WLAN) != 1); result = rfkill_register(ehotk->eeepc_wlan_rfkill); if (result) goto wlan_fail; @@ -677,28 +644,17 @@ static int eeepc_hotk_add(struct acpi_de if (get_acpi(CM_ASL_BLUETOOTH) != -1) { ehotk->eeepc_bluetooth_rfkill = - rfkill_allocate(&device->dev, RFKILL_TYPE_BLUETOOTH); + rfkill_alloc("eeepc-wlan", + &device->dev, + RFKILL_TYPE_WLAN, + &eeepc_rfkill_ops, + (void *)CM_ASL_BLUETOOTH); if (!ehotk->eeepc_bluetooth_rfkill) goto bluetooth_fail; - ehotk->eeepc_bluetooth_rfkill->name = "eeepc-bluetooth"; - ehotk->eeepc_bluetooth_rfkill->toggle_radio = - eeepc_bluetooth_rfkill_set; - ehotk->eeepc_bluetooth_rfkill->get_state = - eeepc_bluetooth_rfkill_state; - if (get_acpi(CM_ASL_BLUETOOTH) == 1) { - ehotk->eeepc_bluetooth_rfkill->state = - RFKILL_STATE_UNBLOCKED; - rfkill_set_default(RFKILL_TYPE_BLUETOOTH, - RFKILL_STATE_UNBLOCKED); - } else { - ehotk->eeepc_bluetooth_rfkill->state = - RFKILL_STATE_SOFT_BLOCKED; - rfkill_set_default(RFKILL_TYPE_BLUETOOTH, - RFKILL_STATE_SOFT_BLOCKED); - } - + rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill, + get_acpi(CM_ASL_BLUETOOTH) != 1); result = rfkill_register(ehotk->eeepc_bluetooth_rfkill); if (result) goto bluetooth_fail; @@ -710,13 +666,10 @@ static int eeepc_hotk_add(struct acpi_de return 0; bluetooth_fail: - if (ehotk->eeepc_bluetooth_rfkill) - rfkill_free(ehotk->eeepc_bluetooth_rfkill); + rfkill_destroy(ehotk->eeepc_bluetooth_rfkill); rfkill_unregister(ehotk->eeepc_wlan_rfkill); - ehotk->eeepc_wlan_rfkill = NULL; wlan_fail: - if (ehotk->eeepc_wlan_rfkill) - rfkill_free(ehotk->eeepc_wlan_rfkill); + rfkill_destroy(ehotk->eeepc_wlan_rfkill); ehotk_fail: kfree(ehotk); ehotk = NULL; --- wireless-testing.orig/net/rfkill/rfkill.c 2009-03-30 11:33:53.000000000 +0200 +++ /dev/null 1970-01-01 00:00:00.000000000 +0000 @@ -1,843 +0,0 @@ -/* - * Copyright (C) 2006 - 2007 Ivo van Doorn - * Copyright (C) 2007 Dmitry Torokhov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/workqueue.h> -#include <linux/capability.h> -#include <linux/list.h> -#include <linux/mutex.h> -#include <linux/rfkill.h> - -/* Get declaration of rfkill_switch_all() to shut up sparse. */ -#include "rfkill-input.h" - - -MODULE_AUTHOR("Ivo van Doorn <IvDoorn@xxxxxxxxx>"); -MODULE_VERSION("1.0"); -MODULE_DESCRIPTION("RF switch support"); -MODULE_LICENSE("GPL"); - -static LIST_HEAD(rfkill_list); /* list of registered rf switches */ -static DEFINE_MUTEX(rfkill_global_mutex); - -static unsigned int rfkill_default_state = RFKILL_STATE_UNBLOCKED; -module_param_named(default_state, rfkill_default_state, uint, 0444); -MODULE_PARM_DESC(default_state, - "Default initial state for all radio types, 0 = radio off"); - -struct rfkill_gsw_state { - enum rfkill_state current_state; - enum rfkill_state default_state; -}; - -static struct rfkill_gsw_state rfkill_global_states[RFKILL_TYPE_MAX]; -static unsigned long rfkill_states_lockdflt[BITS_TO_LONGS(RFKILL_TYPE_MAX)]; -static bool rfkill_epo_lock_active; - - -#ifdef CONFIG_RFKILL_LEDS -static void rfkill_led_trigger(struct rfkill *rfkill, - enum rfkill_state state) -{ - struct led_trigger *led = &rfkill->led_trigger; - - if (!led->name) - return; - if (state != RFKILL_STATE_UNBLOCKED) - led_trigger_event(led, LED_OFF); - else - led_trigger_event(led, LED_FULL); -} - -static void rfkill_led_trigger_activate(struct led_classdev *led) -{ - struct rfkill *rfkill = container_of(led->trigger, - struct rfkill, led_trigger); - - rfkill_led_trigger(rfkill, rfkill->state); -} -#endif /* CONFIG_RFKILL_LEDS */ - -static void rfkill_uevent(struct rfkill *rfkill) -{ - kobject_uevent(&rfkill->dev.kobj, KOBJ_CHANGE); -} - -static void update_rfkill_state(struct rfkill *rfkill) -{ - enum rfkill_state newstate, oldstate; - - if (rfkill->get_state) { - mutex_lock(&rfkill->mutex); - if (!rfkill->get_state(rfkill->data, &newstate)) { - oldstate = rfkill->state; - rfkill->state = newstate; - if (oldstate != newstate) - rfkill_uevent(rfkill); - } - mutex_unlock(&rfkill->mutex); - } -} - -/** - * rfkill_toggle_radio - wrapper for toggle_radio hook - * @rfkill: the rfkill struct to use - * @force: calls toggle_radio even if cache says it is not needed, - * and also makes sure notifications of the state will be - * sent even if it didn't change - * @state: the new state to call toggle_radio() with - * - * Calls rfkill->toggle_radio, enforcing the API for toggle_radio - * calls and handling all the red tape such as issuing notifications - * if the call is successful. - * - * Suspended devices are not touched at all, and -EAGAIN is returned. - * - * Note that the @force parameter cannot override a (possibly cached) - * state of RFKILL_STATE_HARD_BLOCKED. Any device making use of - * RFKILL_STATE_HARD_BLOCKED implements either get_state() or - * rfkill_force_state(), so the cache either is bypassed or valid. - * - * Note that we do call toggle_radio for RFKILL_STATE_SOFT_BLOCKED - * even if the radio is in RFKILL_STATE_HARD_BLOCKED state, so as to - * give the driver a hint that it should double-BLOCK the transmitter. - * - * Caller must have acquired rfkill->mutex. - */ -static int rfkill_toggle_radio(struct rfkill *rfkill, - enum rfkill_state state, - int force) -{ - int retval = 0; - enum rfkill_state oldstate, newstate; - - if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP)) - return -EBUSY; - - oldstate = rfkill->state; - - if (rfkill->get_state && !force && - !rfkill->get_state(rfkill->data, &newstate)) - rfkill->state = newstate; - - switch (state) { - case RFKILL_STATE_HARD_BLOCKED: - /* typically happens when refreshing hardware state, - * such as on resume */ - state = RFKILL_STATE_SOFT_BLOCKED; - break; - case RFKILL_STATE_UNBLOCKED: - /* force can't override this, only rfkill_force_state() can */ - if (rfkill->state == RFKILL_STATE_HARD_BLOCKED) - return -EPERM; - break; - case RFKILL_STATE_SOFT_BLOCKED: - /* nothing to do, we want to give drivers the hint to double - * BLOCK even a transmitter that is already in state - * RFKILL_STATE_HARD_BLOCKED */ - break; - default: - WARN(1, KERN_WARNING - "rfkill: illegal state %d passed as parameter " - "to rfkill_toggle_radio\n", state); - return -EINVAL; - } - - if (force || state != rfkill->state) { - retval = rfkill->toggle_radio(rfkill->data, state); - /* never allow a HARD->SOFT downgrade! */ - if (!retval && rfkill->state != RFKILL_STATE_HARD_BLOCKED) - rfkill->state = state; - } - - if (force || rfkill->state != oldstate) - rfkill_uevent(rfkill); - - return retval; -} - -/** - * __rfkill_switch_all - Toggle state of all switches of given type - * @type: type of interfaces to be affected - * @state: the new state - * - * This function toggles the state of all switches of given type, - * unless a specific switch is claimed by userspace (in which case, - * that switch is left alone) or suspended. - * - * Caller must have acquired rfkill_global_mutex. - */ -static void __rfkill_switch_all(const enum rfkill_type type, - const enum rfkill_state state) -{ - struct rfkill *rfkill; - - if (WARN((state >= RFKILL_STATE_MAX || type >= RFKILL_TYPE_MAX), - KERN_WARNING - "rfkill: illegal state %d or type %d " - "passed as parameter to __rfkill_switch_all\n", - state, type)) - return; - - rfkill_global_states[type].current_state = state; - list_for_each_entry(rfkill, &rfkill_list, node) { - if (rfkill->type == type) { - mutex_lock(&rfkill->mutex); - rfkill_toggle_radio(rfkill, state, 0); - mutex_unlock(&rfkill->mutex); - } - } -} - -/** - * rfkill_switch_all - Toggle state of all switches of given type - * @type: type of interfaces to be affected - * @state: the new state - * - * Acquires rfkill_global_mutex and calls __rfkill_switch_all(@type, @state). - * Please refer to __rfkill_switch_all() for details. - * - * Does nothing if the EPO lock is active. - */ -void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state) -{ - mutex_lock(&rfkill_global_mutex); - if (!rfkill_epo_lock_active) - __rfkill_switch_all(type, state); - mutex_unlock(&rfkill_global_mutex); -} -EXPORT_SYMBOL(rfkill_switch_all); - -/** - * rfkill_epo - emergency power off all transmitters - * - * This kicks all non-suspended rfkill devices to RFKILL_STATE_SOFT_BLOCKED, - * ignoring everything in its path but rfkill_global_mutex and rfkill->mutex. - * - * The global state before the EPO is saved and can be restored later - * using rfkill_restore_states(). - */ -void rfkill_epo(void) -{ - struct rfkill *rfkill; - int i; - - mutex_lock(&rfkill_global_mutex); - - rfkill_epo_lock_active = true; - list_for_each_entry(rfkill, &rfkill_list, node) { - mutex_lock(&rfkill->mutex); - rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); - mutex_unlock(&rfkill->mutex); - } - for (i = 0; i < RFKILL_TYPE_MAX; i++) { - rfkill_global_states[i].default_state = - rfkill_global_states[i].current_state; - rfkill_global_states[i].current_state = - RFKILL_STATE_SOFT_BLOCKED; - } - mutex_unlock(&rfkill_global_mutex); -} -EXPORT_SYMBOL_GPL(rfkill_epo); - -/** - * rfkill_restore_states - restore global states - * - * Restore (and sync switches to) the global state from the - * states in rfkill_default_states. This can undo the effects of - * a call to rfkill_epo(). - */ -void rfkill_restore_states(void) -{ - int i; - - mutex_lock(&rfkill_global_mutex); - - rfkill_epo_lock_active = false; - for (i = 0; i < RFKILL_TYPE_MAX; i++) - __rfkill_switch_all(i, rfkill_global_states[i].default_state); - mutex_unlock(&rfkill_global_mutex); -} -EXPORT_SYMBOL_GPL(rfkill_restore_states); - -/** - * rfkill_remove_epo_lock - unlock state changes - * - * Used by rfkill-input manually unlock state changes, when - * the EPO switch is deactivated. - */ -void rfkill_remove_epo_lock(void) -{ - mutex_lock(&rfkill_global_mutex); - rfkill_epo_lock_active = false; - mutex_unlock(&rfkill_global_mutex); -} -EXPORT_SYMBOL_GPL(rfkill_remove_epo_lock); - -/** - * rfkill_is_epo_lock_active - returns true EPO is active - * - * Returns 0 (false) if there is NOT an active EPO contidion, - * and 1 (true) if there is an active EPO contition, which - * locks all radios in one of the BLOCKED states. - * - * Can be called in atomic context. - */ -bool rfkill_is_epo_lock_active(void) -{ - return rfkill_epo_lock_active; -} -EXPORT_SYMBOL_GPL(rfkill_is_epo_lock_active); - -/** - * rfkill_get_global_state - returns global state for a type - * @type: the type to get the global state of - * - * Returns the current global state for a given wireless - * device type. - */ -enum rfkill_state rfkill_get_global_state(const enum rfkill_type type) -{ - return rfkill_global_states[type].current_state; -} -EXPORT_SYMBOL_GPL(rfkill_get_global_state); - -/** - * rfkill_force_state - Force the internal rfkill radio state - * @rfkill: pointer to the rfkill class to modify. - * @state: the current radio state the class should be forced to. - * - * This function updates the internal state of the radio cached - * by the rfkill class. It should be used when the driver gets - * a notification by the firmware/hardware of the current *real* - * state of the radio rfkill switch. - * - * Devices which are subject to external changes on their rfkill - * state (such as those caused by a hardware rfkill line) MUST - * have their driver arrange to call rfkill_force_state() as soon - * as possible after such a change. - * - * This function may not be called from an atomic context. - */ -int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state) -{ - enum rfkill_state oldstate; - - BUG_ON(!rfkill); - if (WARN((state >= RFKILL_STATE_MAX), - KERN_WARNING - "rfkill: illegal state %d passed as parameter " - "to rfkill_force_state\n", state)) - return -EINVAL; - - mutex_lock(&rfkill->mutex); - - oldstate = rfkill->state; - rfkill->state = state; - - if (state != oldstate) - rfkill_uevent(rfkill); - - mutex_unlock(&rfkill->mutex); - - return 0; -} -EXPORT_SYMBOL(rfkill_force_state); - -static ssize_t rfkill_name_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct rfkill *rfkill = to_rfkill(dev); - - return sprintf(buf, "%s\n", rfkill->name); -} - -static const char *rfkill_get_type_str(enum rfkill_type type) -{ - switch (type) { - case RFKILL_TYPE_WLAN: - return "wlan"; - case RFKILL_TYPE_BLUETOOTH: - return "bluetooth"; - case RFKILL_TYPE_UWB: - return "ultrawideband"; - case RFKILL_TYPE_WIMAX: - return "wimax"; - case RFKILL_TYPE_WWAN: - return "wwan"; - default: - BUG(); - } -} - -static ssize_t rfkill_type_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct rfkill *rfkill = to_rfkill(dev); - - return sprintf(buf, "%s\n", rfkill_get_type_str(rfkill->type)); -} - -static ssize_t rfkill_state_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct rfkill *rfkill = to_rfkill(dev); - - update_rfkill_state(rfkill); - return sprintf(buf, "%d\n", rfkill->state); -} - -static ssize_t rfkill_state_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct rfkill *rfkill = to_rfkill(dev); - unsigned long state; - int error; - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - - error = strict_strtoul(buf, 0, &state); - if (error) - return error; - - /* RFKILL_STATE_HARD_BLOCKED is illegal here... */ - if (state != RFKILL_STATE_UNBLOCKED && - state != RFKILL_STATE_SOFT_BLOCKED) - return -EINVAL; - - error = mutex_lock_killable(&rfkill->mutex); - if (error) - return error; - - if (!rfkill_epo_lock_active) - error = rfkill_toggle_radio(rfkill, state, 0); - else - error = -EPERM; - - mutex_unlock(&rfkill->mutex); - - return error ? error : count; -} - -static ssize_t rfkill_claim_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return sprintf(buf, "%d\n", 0); -} - -static ssize_t rfkill_claim_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - return -EOPNOTSUPP; -} - -static struct device_attribute rfkill_dev_attrs[] = { - __ATTR(name, S_IRUGO, rfkill_name_show, NULL), - __ATTR(type, S_IRUGO, rfkill_type_show, NULL), - __ATTR(state, S_IRUGO|S_IWUSR, rfkill_state_show, rfkill_state_store), - __ATTR(claim, S_IRUGO|S_IWUSR, rfkill_claim_show, rfkill_claim_store), - __ATTR_NULL -}; - -static void rfkill_release(struct device *dev) -{ - struct rfkill *rfkill = to_rfkill(dev); - - kfree(rfkill); - module_put(THIS_MODULE); -} - -#ifdef CONFIG_PM -static int rfkill_suspend(struct device *dev, pm_message_t state) -{ - struct rfkill *rfkill = to_rfkill(dev); - - /* mark class device as suspended */ - if (dev->power.power_state.event != state.event) - dev->power.power_state = state; - - /* store state for the resume handler */ - rfkill->state_for_resume = rfkill->state; - - return 0; -} - -static int rfkill_resume(struct device *dev) -{ - struct rfkill *rfkill = to_rfkill(dev); - enum rfkill_state newstate; - - if (dev->power.power_state.event != PM_EVENT_ON) { - mutex_lock(&rfkill->mutex); - - dev->power.power_state.event = PM_EVENT_ON; - - /* - * rfkill->state could have been modified before we got - * called, and won't be updated by rfkill_toggle_radio() - * in force mode. Sync it FIRST. - */ - if (rfkill->get_state && - !rfkill->get_state(rfkill->data, &newstate)) - rfkill->state = newstate; - - /* - * If we are under EPO, kick transmitter offline, - * otherwise restore to pre-suspend state. - * - * Issue a notification in any case - */ - rfkill_toggle_radio(rfkill, - rfkill_epo_lock_active ? - RFKILL_STATE_SOFT_BLOCKED : - rfkill->state_for_resume, - 1); - - mutex_unlock(&rfkill->mutex); - } - - return 0; -} -#else -#define rfkill_suspend NULL -#define rfkill_resume NULL -#endif - -static int rfkill_dev_uevent(struct device *dev, struct kobj_uevent_env *env) -{ - struct rfkill *rfkill = to_rfkill(dev); - int error; - - error = add_uevent_var(env, "RFKILL_NAME=%s", rfkill->name); - if (error) - return error; - error = add_uevent_var(env, "RFKILL_TYPE=%s", - rfkill_get_type_str(rfkill->type)); - if (error) - return error; - error = add_uevent_var(env, "RFKILL_STATE=%d", rfkill->state); - return error; -} - -static struct class rfkill_class = { - .name = "rfkill", - .dev_release = rfkill_release, - .dev_attrs = rfkill_dev_attrs, - .suspend = rfkill_suspend, - .resume = rfkill_resume, - .dev_uevent = rfkill_dev_uevent, -}; - -static int rfkill_check_duplicity(const struct rfkill *rfkill) -{ - struct rfkill *p; - unsigned long seen[BITS_TO_LONGS(RFKILL_TYPE_MAX)]; - - memset(seen, 0, sizeof(seen)); - - list_for_each_entry(p, &rfkill_list, node) { - if (WARN((p == rfkill), KERN_WARNING - "rfkill: illegal attempt to register " - "an already registered rfkill struct\n")) - return -EEXIST; - set_bit(p->type, seen); - } - - /* 0: first switch of its kind */ - return (test_bit(rfkill->type, seen)) ? 1 : 0; -} - -static int rfkill_add_switch(struct rfkill *rfkill) -{ - int error; - - mutex_lock(&rfkill_global_mutex); - - error = rfkill_check_duplicity(rfkill); - if (error < 0) - goto unlock_out; - - if (!error) { - /* lock default after first use */ - set_bit(rfkill->type, rfkill_states_lockdflt); - rfkill_global_states[rfkill->type].current_state = - rfkill_global_states[rfkill->type].default_state; - } - - rfkill_toggle_radio(rfkill, - rfkill_global_states[rfkill->type].current_state, - 0); - - list_add_tail(&rfkill->node, &rfkill_list); - - error = 0; -unlock_out: - mutex_unlock(&rfkill_global_mutex); - - return error; -} - -static void rfkill_remove_switch(struct rfkill *rfkill) -{ - mutex_lock(&rfkill_global_mutex); - list_del_init(&rfkill->node); - mutex_unlock(&rfkill_global_mutex); - - mutex_lock(&rfkill->mutex); - rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); - mutex_unlock(&rfkill->mutex); -} - -/** - * rfkill_allocate - allocate memory for rfkill structure. - * @parent: device that has rf switch on it - * @type: type of the switch (RFKILL_TYPE_*) - * - * This function should be called by the network driver when it needs - * rfkill structure. Once the structure is allocated the driver should - * finish its initialization by setting the name, private data, enable_radio - * and disable_radio methods and then register it with rfkill_register(). - * - * NOTE: If registration fails the structure shoudl be freed by calling - * rfkill_free() otherwise rfkill_unregister() should be used. - */ -struct rfkill * __must_check rfkill_allocate(struct device *parent, - enum rfkill_type type) -{ - struct rfkill *rfkill; - struct device *dev; - - if (WARN((type >= RFKILL_TYPE_MAX), - KERN_WARNING - "rfkill: illegal type %d passed as parameter " - "to rfkill_allocate\n", type)) - return NULL; - - rfkill = kzalloc(sizeof(struct rfkill), GFP_KERNEL); - if (!rfkill) - return NULL; - - mutex_init(&rfkill->mutex); - INIT_LIST_HEAD(&rfkill->node); - rfkill->type = type; - - dev = &rfkill->dev; - dev->class = &rfkill_class; - dev->parent = parent; - device_initialize(dev); - - __module_get(THIS_MODULE); - - return rfkill; -} -EXPORT_SYMBOL(rfkill_allocate); - -/** - * rfkill_free - Mark rfkill structure for deletion - * @rfkill: rfkill structure to be destroyed - * - * Decrements reference count of the rfkill structure so it is destroyed. - * Note that rfkill_free() should _not_ be called after rfkill_unregister(). - */ -void rfkill_free(struct rfkill *rfkill) -{ - if (rfkill) - put_device(&rfkill->dev); -} -EXPORT_SYMBOL(rfkill_free); - -static void rfkill_led_trigger_register(struct rfkill *rfkill) -{ -#ifdef CONFIG_RFKILL_LEDS - int error; - - if (!rfkill->led_trigger.name) - rfkill->led_trigger.name = dev_name(&rfkill->dev); - if (!rfkill->led_trigger.activate) - rfkill->led_trigger.activate = rfkill_led_trigger_activate; - error = led_trigger_register(&rfkill->led_trigger); - if (error) - rfkill->led_trigger.name = NULL; -#endif /* CONFIG_RFKILL_LEDS */ -} - -static void rfkill_led_trigger_unregister(struct rfkill *rfkill) -{ -#ifdef CONFIG_RFKILL_LEDS - if (rfkill->led_trigger.name) { - led_trigger_unregister(&rfkill->led_trigger); - rfkill->led_trigger.name = NULL; - } -#endif -} - -/** - * rfkill_register - Register a rfkill structure. - * @rfkill: rfkill structure to be registered - * - * This function should be called by the network driver when the rfkill - * structure needs to be registered. Immediately from registration the - * switch driver should be able to service calls to toggle_radio. - */ -int __must_check rfkill_register(struct rfkill *rfkill) -{ - static atomic_t rfkill_no = ATOMIC_INIT(0); - struct device *dev = &rfkill->dev; - int error; - - if (WARN((!rfkill || !rfkill->toggle_radio || - rfkill->type >= RFKILL_TYPE_MAX || - rfkill->state >= RFKILL_STATE_MAX), - KERN_WARNING - "rfkill: attempt to register a " - "badly initialized rfkill struct\n")) - return -EINVAL; - - dev_set_name(dev, "rfkill%ld", (long)atomic_inc_return(&rfkill_no) - 1); - - rfkill_led_trigger_register(rfkill); - - error = rfkill_add_switch(rfkill); - if (error) { - rfkill_led_trigger_unregister(rfkill); - return error; - } - - error = device_add(dev); - if (error) { - rfkill_remove_switch(rfkill); - rfkill_led_trigger_unregister(rfkill); - return error; - } - - return 0; -} -EXPORT_SYMBOL(rfkill_register); - -/** - * rfkill_unregister - Unregister a rfkill structure. - * @rfkill: rfkill structure to be unregistered - * - * This function should be called by the network driver during device - * teardown to destroy rfkill structure. Note that rfkill_free() should - * _not_ be called after rfkill_unregister(). - */ -void rfkill_unregister(struct rfkill *rfkill) -{ - BUG_ON(!rfkill); - device_del(&rfkill->dev); - rfkill_remove_switch(rfkill); - rfkill_led_trigger_unregister(rfkill); - put_device(&rfkill->dev); -} -EXPORT_SYMBOL(rfkill_unregister); - -/** - * rfkill_set_default - set initial value for a switch type - * @type - the type of switch to set the default state of - * @state - the new default state for that group of switches - * - * Sets the initial state rfkill should use for a given type. - * The following initial states are allowed: RFKILL_STATE_SOFT_BLOCKED - * and RFKILL_STATE_UNBLOCKED. - * - * This function is meant to be used by platform drivers for platforms - * that can save switch state across power down/reboot. - * - * The default state for each switch type can be changed exactly once. - * After a switch of that type is registered, the default state cannot - * be changed anymore. This guards against multiple drivers it the - * same platform trying to set the initial switch default state, which - * is not allowed. - * - * Returns -EPERM if the state has already been set once or is in use, - * so drivers likely want to either ignore or at most printk(KERN_NOTICE) - * if this function returns -EPERM. - * - * Returns 0 if the new default state was set, or an error if it - * could not be set. - */ -int rfkill_set_default(enum rfkill_type type, enum rfkill_state state) -{ - int error; - - if (WARN((type >= RFKILL_TYPE_MAX || - (state != RFKILL_STATE_SOFT_BLOCKED && - state != RFKILL_STATE_UNBLOCKED)), - KERN_WARNING - "rfkill: illegal state %d or type %d passed as " - "parameter to rfkill_set_default\n", state, type)) - return -EINVAL; - - mutex_lock(&rfkill_global_mutex); - - if (!test_and_set_bit(type, rfkill_states_lockdflt)) { - rfkill_global_states[type].default_state = state; - rfkill_global_states[type].current_state = state; - error = 0; - } else - error = -EPERM; - - mutex_unlock(&rfkill_global_mutex); - return error; -} -EXPORT_SYMBOL_GPL(rfkill_set_default); - -/* - * Rfkill module initialization/deinitialization. - */ -static int __init rfkill_init(void) -{ - int error; - int i; - - /* RFKILL_STATE_HARD_BLOCKED is illegal here... */ - if (rfkill_default_state != RFKILL_STATE_SOFT_BLOCKED && - rfkill_default_state != RFKILL_STATE_UNBLOCKED) - return -EINVAL; - - for (i = 0; i < RFKILL_TYPE_MAX; i++) - rfkill_global_states[i].default_state = rfkill_default_state; - - error = class_register(&rfkill_class); - if (error) { - printk(KERN_ERR "rfkill: unable to register rfkill class\n"); - return error; - } - - return 0; -} - -static void __exit rfkill_exit(void) -{ - class_unregister(&rfkill_class); -} - -subsys_initcall(rfkill_init); -module_exit(rfkill_exit); --- wireless-testing.orig/net/rfkill/rfkill-input.h 2009-03-30 11:33:36.000000000 +0200 +++ /dev/null 1970-01-01 00:00:00.000000000 +0000 @@ -1,21 +0,0 @@ -/* - * Copyright (C) 2007 Ivo van Doorn - */ - -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __RFKILL_INPUT_H -#define __RFKILL_INPUT_H - -void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state); -void rfkill_epo(void); -void rfkill_restore_states(void); -void rfkill_remove_epo_lock(void); -bool rfkill_is_epo_lock_active(void); -enum rfkill_state rfkill_get_global_state(const enum rfkill_type type); - -#endif /* __RFKILL_INPUT_H */ --- wireless-testing.orig/net/rfkill/rfkill-input.c 2009-03-30 11:33:51.000000000 +0200 +++ /dev/null 1970-01-01 00:00:00.000000000 +0000 @@ -1,392 +0,0 @@ -/* - * Input layer to RF Kill interface connector - * - * Copyright (c) 2007 Dmitry Torokhov - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * If you ever run into a situation in which you have a SW_ type rfkill - * input device, then you can revive code that was removed in the patch - * "rfkill-input: remove unused code". - */ - -#include <linux/module.h> -#include <linux/input.h> -#include <linux/slab.h> -#include <linux/workqueue.h> -#include <linux/init.h> -#include <linux/rfkill.h> -#include <linux/sched.h> - -#include "rfkill-input.h" - -MODULE_AUTHOR("Dmitry Torokhov <dtor@xxxxxxx>"); -MODULE_DESCRIPTION("Input layer to RF switch connector"); -MODULE_LICENSE("GPL"); - -enum rfkill_input_master_mode { - RFKILL_INPUT_MASTER_DONOTHING = 0, - RFKILL_INPUT_MASTER_RESTORE = 1, - RFKILL_INPUT_MASTER_UNBLOCKALL = 2, - RFKILL_INPUT_MASTER_MAX, /* marker */ -}; - -/* Delay (in ms) between consecutive switch ops */ -#define RFKILL_OPS_DELAY 200 - -static enum rfkill_input_master_mode rfkill_master_switch_mode = - RFKILL_INPUT_MASTER_UNBLOCKALL; -module_param_named(master_switch_mode, rfkill_master_switch_mode, uint, 0); -MODULE_PARM_DESC(master_switch_mode, - "SW_RFKILL_ALL ON should: 0=do nothing; 1=restore; 2=unblock all"); - -enum rfkill_global_sched_op { - RFKILL_GLOBAL_OP_EPO = 0, - RFKILL_GLOBAL_OP_RESTORE, - RFKILL_GLOBAL_OP_UNLOCK, - RFKILL_GLOBAL_OP_UNBLOCK, -}; - -struct rfkill_task { - struct delayed_work dwork; - - /* ensures that task is serialized */ - struct mutex mutex; - - /* protects everything below */ - spinlock_t lock; - - /* pending regular switch operations (1=pending) */ - unsigned long sw_pending[BITS_TO_LONGS(RFKILL_TYPE_MAX)]; - - /* should the state be complemented (1=yes) */ - unsigned long sw_togglestate[BITS_TO_LONGS(RFKILL_TYPE_MAX)]; - - bool global_op_pending; - enum rfkill_global_sched_op op; - - /* last time it was scheduled */ - unsigned long last_scheduled; -}; - -static void __rfkill_handle_global_op(enum rfkill_global_sched_op op) -{ - unsigned int i; - - switch (op) { - case RFKILL_GLOBAL_OP_EPO: - rfkill_epo(); - break; - case RFKILL_GLOBAL_OP_RESTORE: - rfkill_restore_states(); - break; - case RFKILL_GLOBAL_OP_UNLOCK: - rfkill_remove_epo_lock(); - break; - case RFKILL_GLOBAL_OP_UNBLOCK: - rfkill_remove_epo_lock(); - for (i = 0; i < RFKILL_TYPE_MAX; i++) - rfkill_switch_all(i, RFKILL_STATE_UNBLOCKED); - break; - default: - /* memory corruption or bug, fail safely */ - rfkill_epo(); - WARN(1, "Unknown requested operation %d! " - "rfkill Emergency Power Off activated\n", - op); - } -} - -static void __rfkill_handle_normal_op(const enum rfkill_type type, - const bool c) -{ - enum rfkill_state state; - - state = rfkill_get_global_state(type); - if (c) - state = rfkill_state_complement(state); - - rfkill_switch_all(type, state); -} - -static void rfkill_task_handler(struct work_struct *work) -{ - struct rfkill_task *task = container_of(work, - struct rfkill_task, dwork.work); - bool doit = true; - - mutex_lock(&task->mutex); - - spin_lock_irq(&task->lock); - while (doit) { - if (task->global_op_pending) { - enum rfkill_global_sched_op op = task->op; - task->global_op_pending = false; - memset(task->sw_pending, 0, sizeof(task->sw_pending)); - spin_unlock_irq(&task->lock); - - __rfkill_handle_global_op(op); - - /* make sure we do at least one pass with - * !task->global_op_pending */ - spin_lock_irq(&task->lock); - continue; - } else if (!rfkill_is_epo_lock_active()) { - unsigned int i = 0; - - while (!task->global_op_pending && - i < RFKILL_TYPE_MAX) { - if (test_and_clear_bit(i, task->sw_pending)) { - bool c; - c = test_and_clear_bit(i, - task->sw_togglestate); - spin_unlock_irq(&task->lock); - - __rfkill_handle_normal_op(i, c); - - spin_lock_irq(&task->lock); - } - i++; - } - } - doit = task->global_op_pending; - } - spin_unlock_irq(&task->lock); - - mutex_unlock(&task->mutex); -} - -static struct rfkill_task rfkill_task = { - .dwork = __DELAYED_WORK_INITIALIZER(rfkill_task.dwork, - rfkill_task_handler), - .mutex = __MUTEX_INITIALIZER(rfkill_task.mutex), - .lock = __SPIN_LOCK_UNLOCKED(rfkill_task.lock), -}; - -static unsigned long rfkill_ratelimit(const unsigned long last) -{ - const unsigned long delay = msecs_to_jiffies(RFKILL_OPS_DELAY); - return (time_after(jiffies, last + delay)) ? 0 : delay; -} - -static void rfkill_schedule_ratelimited(void) -{ - if (!delayed_work_pending(&rfkill_task.dwork)) { - schedule_delayed_work(&rfkill_task.dwork, - rfkill_ratelimit(rfkill_task.last_scheduled)); - rfkill_task.last_scheduled = jiffies; - } -} - -static void rfkill_schedule_global_op(enum rfkill_global_sched_op op) -{ - unsigned long flags; - - spin_lock_irqsave(&rfkill_task.lock, flags); - rfkill_task.op = op; - rfkill_task.global_op_pending = true; - if (op == RFKILL_GLOBAL_OP_EPO && !rfkill_is_epo_lock_active()) { - /* bypass the limiter for EPO */ - cancel_delayed_work(&rfkill_task.dwork); - schedule_delayed_work(&rfkill_task.dwork, 0); - rfkill_task.last_scheduled = jiffies; - } else - rfkill_schedule_ratelimited(); - spin_unlock_irqrestore(&rfkill_task.lock, flags); -} - -static void rfkill_schedule_toggle(enum rfkill_type type) -{ - unsigned long flags; - - if (rfkill_is_epo_lock_active()) - return; - - spin_lock_irqsave(&rfkill_task.lock, flags); - if (!rfkill_task.global_op_pending) { - set_bit(type, rfkill_task.sw_pending); - change_bit(type, rfkill_task.sw_togglestate); - rfkill_schedule_ratelimited(); - } - spin_unlock_irqrestore(&rfkill_task.lock, flags); -} - -static void rfkill_schedule_evsw_rfkillall(int state) -{ - if (state) { - switch (rfkill_master_switch_mode) { - case RFKILL_INPUT_MASTER_UNBLOCKALL: - rfkill_schedule_global_op(RFKILL_GLOBAL_OP_UNBLOCK); - break; - case RFKILL_INPUT_MASTER_RESTORE: - rfkill_schedule_global_op(RFKILL_GLOBAL_OP_RESTORE); - break; - case RFKILL_INPUT_MASTER_DONOTHING: - rfkill_schedule_global_op(RFKILL_GLOBAL_OP_UNLOCK); - break; - default: - /* memory corruption or driver bug! fail safely */ - rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO); - WARN(1, "Unknown rfkill_master_switch_mode (%d), " - "driver bug or memory corruption detected!\n", - rfkill_master_switch_mode); - break; - } - } else - rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO); -} - -static void rfkill_event(struct input_handle *handle, unsigned int type, - unsigned int code, int data) -{ - if (type == EV_KEY && data == 1) { - enum rfkill_type t; - - switch (code) { - case KEY_WLAN: - t = RFKILL_TYPE_WLAN; - break; - case KEY_BLUETOOTH: - t = RFKILL_TYPE_BLUETOOTH; - break; - case KEY_UWB: - t = RFKILL_TYPE_UWB; - break; - case KEY_WIMAX: - t = RFKILL_TYPE_WIMAX; - break; - default: - return; - } - rfkill_schedule_toggle(t); - return; - } else if (type == EV_SW) { - switch (code) { - case SW_RFKILL_ALL: - rfkill_schedule_evsw_rfkillall(data); - return; - default: - return; - } - } -} - -static int rfkill_connect(struct input_handler *handler, struct input_dev *dev, - const struct input_device_id *id) -{ - struct input_handle *handle; - int error; - - handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL); - if (!handle) - return -ENOMEM; - - handle->dev = dev; - handle->handler = handler; - handle->name = "rfkill"; - - /* causes rfkill_start() to be called */ - error = input_register_handle(handle); - if (error) - goto err_free_handle; - - error = input_open_device(handle); - if (error) - goto err_unregister_handle; - - return 0; - - err_unregister_handle: - input_unregister_handle(handle); - err_free_handle: - kfree(handle); - return error; -} - -static void rfkill_start(struct input_handle *handle) -{ - /* Take event_lock to guard against configuration changes, we - * should be able to deal with concurrency with rfkill_event() - * just fine (which event_lock will also avoid). */ - spin_lock_irq(&handle->dev->event_lock); - - if (test_bit(EV_SW, handle->dev->evbit)) { - if (test_bit(SW_RFKILL_ALL, handle->dev->swbit)) - rfkill_schedule_evsw_rfkillall(test_bit(SW_RFKILL_ALL, - handle->dev->sw)); - /* add resync for further EV_SW events here */ - } - - spin_unlock_irq(&handle->dev->event_lock); -} - -static void rfkill_disconnect(struct input_handle *handle) -{ - input_close_device(handle); - input_unregister_handle(handle); - kfree(handle); -} - -static const struct input_device_id rfkill_ids[] = { - { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, - .evbit = { BIT_MASK(EV_KEY) }, - .keybit = { [BIT_WORD(KEY_WLAN)] = BIT_MASK(KEY_WLAN) }, - }, - { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, - .evbit = { BIT_MASK(EV_KEY) }, - .keybit = { [BIT_WORD(KEY_BLUETOOTH)] = BIT_MASK(KEY_BLUETOOTH) }, - }, - { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, - .evbit = { BIT_MASK(EV_KEY) }, - .keybit = { [BIT_WORD(KEY_UWB)] = BIT_MASK(KEY_UWB) }, - }, - { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, - .evbit = { BIT_MASK(EV_KEY) }, - .keybit = { [BIT_WORD(KEY_WIMAX)] = BIT_MASK(KEY_WIMAX) }, - }, - { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_SWBIT, - .evbit = { BIT(EV_SW) }, - .swbit = { [BIT_WORD(SW_RFKILL_ALL)] = BIT_MASK(SW_RFKILL_ALL) }, - }, - { } -}; - -static struct input_handler rfkill_handler = { - .event = rfkill_event, - .connect = rfkill_connect, - .disconnect = rfkill_disconnect, - .start = rfkill_start, - .name = "rfkill", - .id_table = rfkill_ids, -}; - -static int __init rfkill_handler_init(void) -{ - if (rfkill_master_switch_mode >= RFKILL_INPUT_MASTER_MAX) - return -EINVAL; - - /* - * The penalty to not doing this is a possible RFKILL_OPS_DELAY delay - * at the first use. Acceptable, but if we can avoid it, why not? - */ - rfkill_task.last_scheduled = - jiffies - msecs_to_jiffies(RFKILL_OPS_DELAY) - 1; - return input_register_handler(&rfkill_handler); -} - -static void __exit rfkill_handler_exit(void) -{ - input_unregister_handler(&rfkill_handler); - cancel_delayed_work_sync(&rfkill_task.dwork); - rfkill_remove_epo_lock(); -} - -module_init(rfkill_handler_init); -module_exit(rfkill_handler_exit); --- wireless-testing.orig/drivers/net/wireless/b43/main.c 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/net/wireless/b43/main.c 2009-03-30 11:33:53.000000000 +0200 @@ -3492,7 +3492,7 @@ static int b43_op_config(struct ieee8021 if (!!conf->radio_enabled != phy->radio_on) { if (conf->radio_enabled) { - b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED); + b43_software_rfkill(dev, false); b43info(dev->wl, "Radio turned on by software\n"); if (!dev->radio_hw_enable) { b43info(dev->wl, "The hardware RF-kill button " @@ -3500,7 +3500,7 @@ static int b43_op_config(struct ieee8021 "Press the button to turn it on.\n"); } } else { - b43_software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); + b43_software_rfkill(dev, true); b43info(dev->wl, "Radio turned off by software\n"); } } --- wireless-testing.orig/drivers/net/wireless/b43/phy_a.c 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/net/wireless/b43/phy_a.c 2009-03-30 11:33:53.000000000 +0200 @@ -480,11 +480,11 @@ static bool b43_aphy_op_supports_hwpctl( } static void b43_aphy_op_software_rfkill(struct b43_wldev *dev, - enum rfkill_state state) + bool blocked) { struct b43_phy *phy = &dev->phy; - if (state == RFKILL_STATE_UNBLOCKED) { + if (!blocked) { if (phy->radio_on) return; b43_radio_write16(dev, 0x0004, 0x00C0); --- wireless-testing.orig/drivers/net/wireless/b43/phy_common.c 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/net/wireless/b43/phy_common.c 2009-03-30 11:33:53.000000000 +0200 @@ -84,7 +84,7 @@ int b43_phy_init(struct b43_wldev *dev) phy->channel = ops->get_default_chan(dev); - ops->software_rfkill(dev, RFKILL_STATE_UNBLOCKED); + ops->software_rfkill(dev, false); err = ops->init(dev); if (err) { b43err(dev->wl, "PHY init failed\n"); @@ -104,7 +104,7 @@ err_phy_exit: if (ops->exit) ops->exit(dev); err_block_rf: - ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); + ops->software_rfkill(dev, true); return err; } @@ -113,7 +113,7 @@ void b43_phy_exit(struct b43_wldev *dev) { const struct b43_phy_operations *ops = dev->phy.ops; - ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); + ops->software_rfkill(dev, true); if (ops->exit) ops->exit(dev); } @@ -287,18 +287,13 @@ err_restore_cookie: return err; } -void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state) +void b43_software_rfkill(struct b43_wldev *dev, bool blocked) { struct b43_phy *phy = &dev->phy; - if (state == RFKILL_STATE_HARD_BLOCKED) { - /* We cannot hardware-block the device */ - state = RFKILL_STATE_SOFT_BLOCKED; - } - b43_mac_suspend(dev); - phy->ops->software_rfkill(dev, state); - phy->radio_on = (state == RFKILL_STATE_UNBLOCKED); + phy->ops->software_rfkill(dev, blocked); + phy->radio_on = !blocked; b43_mac_enable(dev); } --- wireless-testing.orig/drivers/net/wireless/b43/phy_common.h 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/net/wireless/b43/phy_common.h 2009-03-30 11:33:53.000000000 +0200 @@ -159,7 +159,7 @@ struct b43_phy_operations { /* Radio */ bool (*supports_hwpctl)(struct b43_wldev *dev); - void (*software_rfkill)(struct b43_wldev *dev, enum rfkill_state state); + void (*software_rfkill)(struct b43_wldev *dev, bool blocked); void (*switch_analog)(struct b43_wldev *dev, bool on); int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel); unsigned int (*get_default_chan)(struct b43_wldev *dev); @@ -362,7 +362,7 @@ int b43_switch_channel(struct b43_wldev /** * b43_software_rfkill - Turn the radio ON or OFF in software. */ -void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state); +void b43_software_rfkill(struct b43_wldev *dev, bool blocked); /** * b43_phy_txpower_check - Check TX power output. --- wireless-testing.orig/drivers/net/wireless/b43/phy_g.c 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/net/wireless/b43/phy_g.c 2009-03-30 11:33:53.000000000 +0200 @@ -2592,7 +2592,7 @@ static bool b43_gphy_op_supports_hwpctl( } static void b43_gphy_op_software_rfkill(struct b43_wldev *dev, - enum rfkill_state state) + bool blocked) { struct b43_phy *phy = &dev->phy; struct b43_phy_g *gphy = phy->g; @@ -2600,7 +2600,7 @@ static void b43_gphy_op_software_rfkill( might_sleep(); - if (state == RFKILL_STATE_UNBLOCKED) { + if (!blocked) { /* Turn radio ON */ if (phy->radio_on) return; --- wireless-testing.orig/drivers/net/wireless/b43/phy_n.c 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/net/wireless/b43/phy_n.c 2009-03-30 11:33:53.000000000 +0200 @@ -579,7 +579,7 @@ static void b43_nphy_op_radio_write(stru } static void b43_nphy_op_software_rfkill(struct b43_wldev *dev, - enum rfkill_state state) + bool blocked) {//TODO } --- wireless-testing.orig/drivers/net/wireless/b43/rfkill.c 2009-03-30 11:33:53.000000000 +0200 +++ wireless-testing/drivers/net/wireless/b43/rfkill.c 2009-03-30 23:30:38.000000000 +0200 @@ -45,75 +45,55 @@ static bool b43_is_hw_radio_enabled(stru } /* The poll callback for the hardware button. */ -static void b43_rfkill_poll(struct input_polled_dev *poll_dev) +static bool b43_rfkill_poll(void *data) { - struct b43_wldev *dev = poll_dev->private; + struct b43_wldev *dev = data; struct b43_wl *wl = dev->wl; bool enabled; - bool report_change = 0; mutex_lock(&wl->mutex); if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) { mutex_unlock(&wl->mutex); - return; + return false; } enabled = b43_is_hw_radio_enabled(dev); if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; - report_change = 1; b43info(wl, "Radio hardware status changed to %s\n", enabled ? "ENABLED" : "DISABLED"); } mutex_unlock(&wl->mutex); - /* send the radio switch event to the system - note both a key press - * and a release are required */ - if (unlikely(report_change)) { - input_report_key(poll_dev->input, KEY_WLAN, 1); - input_report_key(poll_dev->input, KEY_WLAN, 0); - } + return !enabled; } /* Called when the RFKILL toggled in software. */ -static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state) +static int b43_rfkill_soft_set(void *data, bool blocked) { struct b43_wldev *dev = data; struct b43_wl *wl = dev->wl; - int err = -EBUSY; + int err = -EINVAL; - if (!wl->rfkill.registered) - return 0; + if (WARN_ON(!wl->rfkill.registered)) + return -EINVAL; mutex_lock(&wl->mutex); + if (b43_status(dev) < B43_STAT_INITIALIZED) goto out_unlock; + + if (WARN_ON(!dev->radio_hw_enable && !blocked)) + goto out_unlock; + + if (!blocked != dev->phy.radio_on) + b43_software_rfkill(dev, blocked); err = 0; - switch (state) { - case RFKILL_STATE_UNBLOCKED: - if (!dev->radio_hw_enable) { - /* No luck. We can't toggle the hardware RF-kill - * button from software. */ - err = -EBUSY; - goto out_unlock; - } - if (!dev->phy.radio_on) - b43_software_rfkill(dev, state); - break; - case RFKILL_STATE_SOFT_BLOCKED: - if (dev->phy.radio_on) - b43_software_rfkill(dev, state); - break; - default: - b43warn(wl, "Received unexpected rfkill state %d.\n", state); - break; - } out_unlock: mutex_unlock(&wl->mutex); - return err; } -char *b43_rfkill_led_name(struct b43_wldev *dev) +const char *b43_rfkill_led_name(struct b43_wldev *dev) { struct b43_rfkill *rfk = &(dev->wl->rfkill); @@ -122,6 +102,11 @@ char *b43_rfkill_led_name(struct b43_wld return rfkill_get_led_name(rfk->rfkill); } +static const struct rfkill_ops b43_rfkill_ops = { + .set_block = b43_rfkill_soft_set, + .poll_hw_block = b43_rfkill_poll, +}; + void b43_rfkill_init(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; @@ -130,65 +115,26 @@ void b43_rfkill_init(struct b43_wldev *d rfk->registered = 0; - rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN); - if (!rfk->rfkill) - goto out_error; snprintf(rfk->name, sizeof(rfk->name), "b43-%s", wiphy_name(wl->hw->wiphy)); - rfk->rfkill->name = rfk->name; - rfk->rfkill->state = RFKILL_STATE_UNBLOCKED; - rfk->rfkill->data = dev; - rfk->rfkill->toggle_radio = b43_rfkill_soft_toggle; - - rfk->poll_dev = input_allocate_polled_device(); - if (!rfk->poll_dev) { - rfkill_free(rfk->rfkill); - goto err_freed_rfk; - } - rfk->poll_dev->private = dev; - rfk->poll_dev->poll = b43_rfkill_poll; - rfk->poll_dev->poll_interval = 1000; /* msecs */ - - rfk->poll_dev->input->name = rfk->name; - rfk->poll_dev->input->id.bustype = BUS_HOST; - rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor; - rfk->poll_dev->input->evbit[0] = BIT(EV_KEY); - set_bit(KEY_WLAN, rfk->poll_dev->input->keybit); + rfk->rfkill = rfkill_alloc(rfk->name, + dev->dev->dev, + RFKILL_TYPE_WLAN, + &b43_rfkill_ops, dev); + if (!rfk->rfkill) + goto out_error; err = rfkill_register(rfk->rfkill); if (err) - goto err_free_polldev; - -#ifdef CONFIG_RFKILL_INPUT_MODULE - /* B43 RF-kill isn't useful without the rfkill-input subsystem. - * Try to load the module. */ - err = request_module("rfkill-input"); - if (err) - b43warn(wl, "Failed to load the rfkill-input module. " - "The built-in radio LED will not work.\n"); -#endif /* CONFIG_RFKILL_INPUT */ - -#if !defined(CONFIG_RFKILL_INPUT) && !defined(CONFIG_RFKILL_INPUT_MODULE) - b43warn(wl, "The rfkill-input subsystem is not available. " - "The built-in radio LED will not work.\n"); -#endif - - err = input_register_polled_device(rfk->poll_dev); - if (err) - goto err_unreg_rfk; + goto err_free; rfk->registered = 1; return; -err_unreg_rfk: - rfkill_unregister(rfk->rfkill); -err_free_polldev: - input_free_polled_device(rfk->poll_dev); - rfk->poll_dev = NULL; -err_freed_rfk: - rfk->rfkill = NULL; -out_error: + err_free: + rfkill_destroy(rfk->rfkill); + out_error: rfk->registered = 0; b43warn(wl, "RF-kill button init failed\n"); } @@ -201,9 +147,7 @@ void b43_rfkill_exit(struct b43_wldev *d return; rfk->registered = 0; - input_unregister_polled_device(rfk->poll_dev); rfkill_unregister(rfk->rfkill); - input_free_polled_device(rfk->poll_dev); - rfk->poll_dev = NULL; + rfkill_destroy(rfk->rfkill); rfk->rfkill = NULL; } --- wireless-testing.orig/drivers/net/wireless/b43legacy/rfkill.c 2009-03-30 11:33:53.000000000 +0200 +++ wireless-testing/drivers/net/wireless/b43legacy/rfkill.c 2009-03-30 23:31:18.000000000 +0200 @@ -45,78 +45,60 @@ static bool b43legacy_is_hw_radio_enable } /* The poll callback for the hardware button. */ -static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev) +static bool b43legacy_rfkill_poll(void *data) { - struct b43legacy_wldev *dev = poll_dev->private; + struct b43legacy_wldev *dev = data; struct b43legacy_wl *wl = dev->wl; bool enabled; - bool report_change = 0; mutex_lock(&wl->mutex); if (unlikely(b43legacy_status(dev) < B43legacy_STAT_INITIALIZED)) { mutex_unlock(&wl->mutex); - return; + return false; } enabled = b43legacy_is_hw_radio_enabled(dev); if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; - report_change = 1; b43legacyinfo(wl, "Radio hardware status changed to %s\n", enabled ? "ENABLED" : "DISABLED"); } mutex_unlock(&wl->mutex); - /* send the radio switch event to the system - note both a key press - * and a release are required */ - if (unlikely(report_change)) { - input_report_key(poll_dev->input, KEY_WLAN, 1); - input_report_key(poll_dev->input, KEY_WLAN, 0); - } + return !enabled; } /* Called when the RFKILL toggled in software. * This is called without locking. */ -static int b43legacy_rfkill_soft_toggle(void *data, enum rfkill_state state) +static int b43legacy_rfkill_soft_set(void *data, bool blocked) { struct b43legacy_wldev *dev = data; struct b43legacy_wl *wl = dev->wl; - int err = -EBUSY; + int ret = -EINVAL; if (!wl->rfkill.registered) - return 0; + return -EINVAL; mutex_lock(&wl->mutex); if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED) goto out_unlock; - err = 0; - switch (state) { - case RFKILL_STATE_UNBLOCKED: - if (!dev->radio_hw_enable) { - /* No luck. We can't toggle the hardware RF-kill - * button from software. */ - err = -EBUSY; - goto out_unlock; - } - if (!dev->phy.radio_on) + + if (WARN_ON(!blocked && !dev->radio_hw_enable)) + goto out_unlock; + + if (!blocked != dev->phy.radio_on) { + if (!blocked) b43legacy_radio_turn_on(dev); - break; - case RFKILL_STATE_SOFT_BLOCKED: - if (dev->phy.radio_on) + else b43legacy_radio_turn_off(dev, 0); - break; - default: - b43legacywarn(wl, "Received unexpected rfkill state %d.\n", - state); - break; } + ret = 0; out_unlock: mutex_unlock(&wl->mutex); - - return err; + return ret; } -char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev) +const char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev) { struct b43legacy_rfkill *rfk = &(dev->wl->rfkill); @@ -125,6 +107,11 @@ char *b43legacy_rfkill_led_name(struct b return rfkill_get_led_name(rfk->rfkill); } +static const struct rfkill_ops b43legacy_rfkill_ops = { + .set_block = b43legacy_rfkill_soft_set, + .poll_hw_block = b43legacy_rfkill_poll, +}; + void b43legacy_rfkill_init(struct b43legacy_wldev *dev) { struct b43legacy_wl *wl = dev->wl; @@ -133,60 +120,25 @@ void b43legacy_rfkill_init(struct b43leg rfk->registered = 0; - rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN); - if (!rfk->rfkill) - goto out_error; snprintf(rfk->name, sizeof(rfk->name), "b43legacy-%s", wiphy_name(wl->hw->wiphy)); - rfk->rfkill->name = rfk->name; - rfk->rfkill->state = RFKILL_STATE_UNBLOCKED; - rfk->rfkill->data = dev; - rfk->rfkill->toggle_radio = b43legacy_rfkill_soft_toggle; - - rfk->poll_dev = input_allocate_polled_device(); - if (!rfk->poll_dev) { - rfkill_free(rfk->rfkill); - goto err_freed_rfk; - } - - rfk->poll_dev->private = dev; - rfk->poll_dev->poll = b43legacy_rfkill_poll; - rfk->poll_dev->poll_interval = 1000; /* msecs */ - - rfk->poll_dev->input->name = rfk->name; - rfk->poll_dev->input->id.bustype = BUS_HOST; - rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor; - rfk->poll_dev->input->evbit[0] = BIT(EV_KEY); - set_bit(KEY_WLAN, rfk->poll_dev->input->keybit); + rfk->rfkill = rfkill_alloc(rfk->name, + dev->dev->dev, + RFKILL_TYPE_WLAN, + &b43legacy_rfkill_ops, dev); + if (!rfk->rfkill) + goto out_error; err = rfkill_register(rfk->rfkill); if (err) - goto err_free_polldev; - -#ifdef CONFIG_RFKILL_INPUT_MODULE - /* B43legacy RF-kill isn't useful without the rfkill-input subsystem. - * Try to load the module. */ - err = request_module("rfkill-input"); - if (err) - b43legacywarn(wl, "Failed to load the rfkill-input module." - "The built-in radio LED will not work.\n"); -#endif /* CONFIG_RFKILL_INPUT */ - - err = input_register_polled_device(rfk->poll_dev); - if (err) - goto err_unreg_rfk; + goto err_free; rfk->registered = 1; return; -err_unreg_rfk: - rfkill_unregister(rfk->rfkill); -err_free_polldev: - input_free_polled_device(rfk->poll_dev); - rfk->poll_dev = NULL; -err_freed_rfk: - rfk->rfkill = NULL; -out_error: + err_free: + rfkill_destroy(rfk->rfkill); + out_error: rfk->registered = 0; b43legacywarn(wl, "RF-kill button init failed\n"); } @@ -199,10 +151,8 @@ void b43legacy_rfkill_exit(struct b43leg return; rfk->registered = 0; - input_unregister_polled_device(rfk->poll_dev); rfkill_unregister(rfk->rfkill); - input_free_polled_device(rfk->poll_dev); - rfk->poll_dev = NULL; + rfkill_destroy(rfk->rfkill); rfk->rfkill = NULL; } --- wireless-testing.orig/drivers/net/wireless/iwlwifi/iwl-rfkill.c 2009-03-30 11:33:53.000000000 +0200 +++ wireless-testing/drivers/net/wireless/iwlwifi/iwl-rfkill.c 2009-03-30 23:32:52.000000000 +0200 @@ -36,42 +36,37 @@ #include "iwl-core.h" /* software rf-kill from user */ -static int iwl_rfkill_soft_rf_kill(void *data, enum rfkill_state state) +static int iwl_rfkill_soft_rf_kill(void *data, bool blocked) { struct iwl_priv *priv = data; - int err = 0; if (!priv->rfkill) - return 0; + return -EINVAL; if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return 0; - IWL_DEBUG_RF_KILL(priv, "we received soft RFKILL set to state %d\n", state); + IWL_DEBUG_RF_KILL(priv, "received soft RFKILL: block=%d\n", blocked); + mutex_lock(&priv->mutex); - switch (state) { - case RFKILL_STATE_UNBLOCKED: - if (iwl_is_rfkill_hw(priv)) { - err = -EBUSY; - goto out_unlock; - } + if (WARN_ON(iwl_is_rfkill_hw(priv))) + goto out_unlock; + + if (!blocked) iwl_radio_kill_sw_enable_radio(priv); - break; - case RFKILL_STATE_SOFT_BLOCKED: + else iwl_radio_kill_sw_disable_radio(priv); - break; - default: - IWL_WARN(priv, "we received unexpected RFKILL state %d\n", - state); - break; - } + out_unlock: mutex_unlock(&priv->mutex); - - return err; + return 0; } +static const struct rfkill_ops iwl_rfkill_ops = { + .set_block = iwl_rfkill_soft_rf_kill, +}; + int iwl_rfkill_init(struct iwl_priv *priv) { struct device *device = wiphy_dev(priv->hw->wiphy); @@ -80,21 +75,16 @@ int iwl_rfkill_init(struct iwl_priv *pri BUG_ON(device == NULL); IWL_DEBUG_RF_KILL(priv, "Initializing RFKILL.\n"); - priv->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN); + priv->rfkill = rfkill_alloc(priv->cfg->name, + device, + RFKILL_TYPE_WLAN, + &iwl_rfkill_ops, priv); if (!priv->rfkill) { IWL_ERR(priv, "Unable to allocate RFKILL device.\n"); ret = -ENOMEM; goto error; } - priv->rfkill->name = priv->cfg->name; - priv->rfkill->data = priv; - priv->rfkill->state = RFKILL_STATE_UNBLOCKED; - priv->rfkill->toggle_radio = iwl_rfkill_soft_rf_kill; - - priv->rfkill->dev.class->suspend = NULL; - priv->rfkill->dev.class->resume = NULL; - ret = rfkill_register(priv->rfkill); if (ret) { IWL_ERR(priv, "Unable to register RFKILL: %d\n", ret); @@ -102,11 +92,10 @@ int iwl_rfkill_init(struct iwl_priv *pri } IWL_DEBUG_RF_KILL(priv, "RFKILL initialization complete.\n"); - return ret; + return 0; free_rfkill: - if (priv->rfkill != NULL) - rfkill_free(priv->rfkill); + rfkill_destroy(priv->rfkill); priv->rfkill = NULL; error: @@ -118,8 +107,10 @@ EXPORT_SYMBOL(iwl_rfkill_init); void iwl_rfkill_unregister(struct iwl_priv *priv) { - if (priv->rfkill) + if (priv->rfkill) { rfkill_unregister(priv->rfkill); + rfkill_destroy(priv->rfkill); + } priv->rfkill = NULL; } @@ -131,14 +122,10 @@ void iwl_rfkill_set_hw_state(struct iwl_ if (!priv->rfkill) return; - if (iwl_is_rfkill_hw(priv)) { - rfkill_force_state(priv->rfkill, RFKILL_STATE_HARD_BLOCKED); - return; - } - - if (!iwl_is_rfkill_sw(priv)) - rfkill_force_state(priv->rfkill, RFKILL_STATE_UNBLOCKED); + if (rfkill_set_hw_state(priv->rfkill, + !!iwl_is_rfkill_hw(priv))) + iwl_radio_kill_sw_disable_radio(priv); else - rfkill_force_state(priv->rfkill, RFKILL_STATE_SOFT_BLOCKED); + iwl_radio_kill_sw_enable_radio(priv); } EXPORT_SYMBOL(iwl_rfkill_set_hw_state); --- wireless-testing.orig/Documentation/rfkill.txt 2009-03-30 11:33:53.000000000 +0200 +++ wireless-testing/Documentation/rfkill.txt 2009-03-30 11:33:53.000000000 +0200 @@ -1,571 +1,130 @@ -rfkill - RF switch subsystem support -==================================== +rfkill - RF kill switch support +=============================== -1 Introduction -2 Implementation details -3 Kernel driver guidelines -3.1 wireless device drivers -3.2 platform/switch drivers -3.3 input device drivers -4 Kernel API -5 Userspace support - - -1. Introduction: - -The rfkill switch subsystem exists to add a generic interface to circuitry that -can enable or disable the signal output of a wireless *transmitter* of any -type. By far, the most common use is to disable radio-frequency transmitters. - -Note that disabling the signal output means that the the transmitter is to be -made to not emit any energy when "blocked". rfkill is not about blocking data -transmissions, it is about blocking energy emission. - -The rfkill subsystem offers support for keys and switches often found on -laptops to enable wireless devices like WiFi and Bluetooth, so that these keys -and switches actually perform an action in all wireless devices of a given type -attached to the system. - -The buttons to enable and disable the wireless transmitters are important in -situations where the user is for example using his laptop on a location where -radio-frequency transmitters _must_ be disabled (e.g. airplanes). - -Because of this requirement, userspace support for the keys should not be made -mandatory. Because userspace might want to perform some additional smarter -tasks when the key is pressed, rfkill provides userspace the possibility to -take over the task to handle the key events. +1. Introduction +2. Implementation details +3. Kernel driver guidelines +4. Kernel API +5. Userspace support -=============================================================================== -2: Implementation details + +1. Introduction + +The rfkill subsystem provides a generic interface to disabling any radio +transmitter in the system. When a transmitter is blocked, it shall not +radiate any power. + +The subsystem also provides the ability to react on button presses and +disable all transmitters of a certain type (or all). This is intended for +situations where transmitters need to be turned off, for example on +aircraft. + + + +2. Implementation details The rfkill subsystem is composed of various components: the rfkill class, the rfkill-input module (an input layer handler), and some specific input layer events. -The rfkill class provides kernel drivers with an interface that allows them to -know when they should enable or disable a wireless network device transmitter. -This is enabled by the CONFIG_RFKILL Kconfig option. - -The rfkill class support makes sure userspace will be notified of all state -changes on rfkill devices through uevents. It provides a notification chain -for interested parties in the kernel to also get notified of rfkill state -changes in other drivers. It creates several sysfs entries which can be used -by userspace. See section "Userspace support". - -The rfkill-input module provides the kernel with the ability to implement a -basic response when the user presses a key or button (or toggles a switch) -related to rfkill functionality. It is an in-kernel implementation of default -policy of reacting to rfkill-related input events and neither mandatory nor -required for wireless drivers to operate. It is enabled by the -CONFIG_RFKILL_INPUT Kconfig option. - -rfkill-input is a rfkill-related events input layer handler. This handler will -listen to all rfkill key events and will change the rfkill state of the -wireless devices accordingly. With this option enabled userspace could either -do nothing or simply perform monitoring tasks. - -The rfkill-input module also provides EPO (emergency power-off) functionality -for all wireless transmitters. This function cannot be overridden, and it is -always active. rfkill EPO is related to *_RFKILL_ALL input layer events. - - -Important terms for the rfkill subsystem: - -In order to avoid confusion, we avoid the term "switch" in rfkill when it is -referring to an electronic control circuit that enables or disables a -transmitter. We reserve it for the physical device a human manipulates -(which is an input device, by the way): - -rfkill switch: - - A physical device a human manipulates. Its state can be perceived by - the kernel either directly (through a GPIO pin, ACPI GPE) or by its - effect on a rfkill line of a wireless device. - -rfkill controller: - - A hardware circuit that controls the state of a rfkill line, which a - kernel driver can interact with *to modify* that state (i.e. it has - either write-only or read/write access). - -rfkill line: - - An input channel (hardware or software) of a wireless device, which - causes a wireless transmitter to stop emitting energy (BLOCK) when it - is active. Point of view is extremely important here: rfkill lines are - always seen from the PoV of a wireless device (and its driver). - -soft rfkill line/software rfkill line: - - A rfkill line the wireless device driver can directly change the state - of. Related to rfkill_state RFKILL_STATE_SOFT_BLOCKED. - -hard rfkill line/hardware rfkill line: - - A rfkill line that works fully in hardware or firmware, and that cannot - be overridden by the kernel driver. The hardware device or the - firmware just exports its status to the driver, but it is read-only. - Related to rfkill_state RFKILL_STATE_HARD_BLOCKED. - -The enum rfkill_state describes the rfkill state of a transmitter: - -When a rfkill line or rfkill controller is in the RFKILL_STATE_UNBLOCKED state, -the wireless transmitter (radio TX circuit for example) is *enabled*. When the -it is in the RFKILL_STATE_SOFT_BLOCKED or RFKILL_STATE_HARD_BLOCKED, the -wireless transmitter is to be *blocked* from operating. - -RFKILL_STATE_SOFT_BLOCKED indicates that a call to toggle_radio() can change -that state. RFKILL_STATE_HARD_BLOCKED indicates that a call to toggle_radio() -will not be able to change the state and will return with a suitable error if -attempts are made to set the state to RFKILL_STATE_UNBLOCKED. - -RFKILL_STATE_HARD_BLOCKED is used by drivers to signal that the device is -locked in the BLOCKED state by a hardwire rfkill line (typically an input pin -that, when active, forces the transmitter to be disabled) which the driver -CANNOT override. - -Full rfkill functionality requires two different subsystems to cooperate: the -input layer and the rfkill class. The input layer issues *commands* to the -entire system requesting that devices registered to the rfkill class change -state. The way this interaction happens is not complex, but it is not obvious -either: - -Kernel Input layer: - - * Generates KEY_WWAN, KEY_WLAN, KEY_BLUETOOTH, SW_RFKILL_ALL, and - other such events when the user presses certain keys, buttons, or - toggles certain physical switches. - - THE INPUT LAYER IS NEVER USED TO PROPAGATE STATUS, NOTIFICATIONS OR THE - KIND OF STUFF AN ON-SCREEN-DISPLAY APPLICATION WOULD REPORT. It is - used to issue *commands* for the system to change behaviour, and these - commands may or may not be carried out by some kernel driver or - userspace application. It follows that doing user feedback based only - on input events is broken, as there is no guarantee that an input event - will be acted upon. - - Most wireless communication device drivers implementing rfkill - functionality MUST NOT generate these events, and have no reason to - register themselves with the input layer. Doing otherwise is a common - misconception. There is an API to propagate rfkill status change - information, and it is NOT the input layer. - -rfkill class: - - * Calls a hook in a driver to effectively change the wireless - transmitter state; - * Keeps track of the wireless transmitter state (with help from - the driver); - * Generates userspace notifications (uevents) and a call to a - notification chain (kernel) when there is a wireless transmitter - state change; - * Connects a wireless communications driver with the common rfkill - control system, which, for example, allows actions such as - "switch all bluetooth devices offline" to be carried out by - userspace or by rfkill-input. - - THE RFKILL CLASS NEVER ISSUES INPUT EVENTS. THE RFKILL CLASS DOES - NOT LISTEN TO INPUT EVENTS. NO DRIVER USING THE RFKILL CLASS SHALL - EVER LISTEN TO, OR ACT ON RFKILL INPUT EVENTS. Doing otherwise is - a layering violation. - - Most wireless data communication drivers in the kernel have just to - implement the rfkill class API to work properly. Interfacing to the - input layer is not often required (and is very often a *bug*) on - wireless drivers. - - Platform drivers often have to attach to the input layer to *issue* - (but never to listen to) rfkill events for rfkill switches, and also to - the rfkill class to export a control interface for the platform rfkill - controllers to the rfkill subsystem. This does NOT mean the rfkill - switch is attached to a rfkill class (doing so is almost always wrong). - It just means the same kernel module is the driver for different - devices (rfkill switches and rfkill controllers). - - -Userspace input handlers (uevents) or kernel input handlers (rfkill-input): - - * Implements the policy of what should happen when one of the input - layer events related to rfkill operation is received. - * Uses the sysfs interface (userspace) or private rfkill API calls - to tell the devices registered with the rfkill class to change - their state (i.e. translates the input layer event into real - action). - - * rfkill-input implements EPO by handling EV_SW SW_RFKILL_ALL 0 - (power off all transmitters) in a special way: it ignores any - overrides and local state cache and forces all transmitters to the - RFKILL_STATE_SOFT_BLOCKED state (including those which are already - supposed to be BLOCKED). - * rfkill EPO will remain active until rfkill-input receives an - EV_SW SW_RFKILL_ALL 1 event. While the EPO is active, transmitters - are locked in the blocked state (rfkill will refuse to unblock them). - * rfkill-input implements different policies that the user can - select for handling EV_SW SW_RFKILL_ALL 1. It will unlock rfkill, - and either do nothing (leave transmitters blocked, but now unlocked), - restore the transmitters to their state before the EPO, or unblock - them all. - -Userspace uevent handler or kernel platform-specific drivers hooked to the -rfkill notifier chain: - - * Taps into the rfkill notifier chain or to KOBJ_CHANGE uevents, - in order to know when a device that is registered with the rfkill - class changes state; - * Issues feedback notifications to the user; - * In the rare platforms where this is required, synthesizes an input - event to command all *OTHER* rfkill devices to also change their - statues when a specific rfkill device changes state. - - -=============================================================================== -3: Kernel driver guidelines - -Remember: point-of-view is everything for a driver that connects to the rfkill -subsystem. All the details below must be measured/perceived from the point of -view of the specific driver being modified. - -The first thing one needs to know is whether his driver should be talking to -the rfkill class or to the input layer. In rare cases (platform drivers), it -could happen that you need to do both, as platform drivers often handle a -variety of devices in the same driver. - -Do not mistake input devices for rfkill controllers. The only type of "rfkill -switch" device that is to be registered with the rfkill class are those -directly controlling the circuits that cause a wireless transmitter to stop -working (or the software equivalent of them), i.e. what we call a rfkill -controller. Every other kind of "rfkill switch" is just an input device and -MUST NOT be registered with the rfkill class. - -A driver should register a device with the rfkill class when ALL of the -following conditions are met (they define a rfkill controller): - -1. The device is/controls a data communications wireless transmitter; - -2. The kernel can interact with the hardware/firmware to CHANGE the wireless - transmitter state (block/unblock TX operation); - -3. The transmitter can be made to not emit any energy when "blocked": - rfkill is not about blocking data transmissions, it is about blocking - energy emission; - -A driver should register a device with the input subsystem to issue -rfkill-related events (KEY_WLAN, KEY_BLUETOOTH, KEY_WWAN, KEY_WIMAX, -SW_RFKILL_ALL, etc) when ALL of the folowing conditions are met: - -1. It is directly related to some physical device the user interacts with, to - command the O.S./firmware/hardware to enable/disable a data communications - wireless transmitter. - - Examples of the physical device are: buttons, keys and switches the user - will press/touch/slide/switch to enable or disable the wireless - communication device. - -2. It is NOT slaved to another device, i.e. there is no other device that - issues rfkill-related input events in preference to this one. - - Please refer to the corner cases and examples section for more details. - -When in doubt, do not issue input events. For drivers that should generate -input events in some platforms, but not in others (e.g. b43), the best solution -is to NEVER generate input events in the first place. That work should be -deferred to a platform-specific kernel module (which will know when to generate -events through the rfkill notifier chain) or to userspace. This avoids the -usual maintenance problems with DMI whitelisting. - - -Corner cases and examples: -==================================== - -1. If the device is an input device that, because of hardware or firmware, -causes wireless transmitters to be blocked regardless of the kernel's will, it -is still just an input device, and NOT to be registered with the rfkill class. - -2. If the wireless transmitter switch control is read-only, it is an input -device and not to be registered with the rfkill class (and maybe not to be made -an input layer event source either, see below). - -3. If there is some other device driver *closer* to the actual hardware the -user interacted with (the button/switch/key) to issue an input event, THAT is -the device driver that should be issuing input events. - -E.g: - [RFKILL slider switch] -- [GPIO hardware] -- [WLAN card rf-kill input] - (platform driver) (wireless card driver) - -The user is closer to the RFKILL slide switch plaform driver, so the driver -which must issue input events is the platform driver looking at the GPIO -hardware, and NEVER the wireless card driver (which is just a slave). It is -very likely that there are other leaves than just the WLAN card rf-kill input -(e.g. a bluetooth card, etc)... - -On the other hand, some embedded devices do this: - - [RFKILL slider switch] -- [WLAN card rf-kill input] - (wireless card driver) - -In this situation, the wireless card driver *could* register itself as an input -device and issue rf-kill related input events... but in order to AVOID the need -for DMI whitelisting, the wireless card driver does NOT do it. Userspace (HAL) -or a platform driver (that exists only on these embedded devices) will do the -dirty job of issuing the input events. - - -COMMON MISTAKES in kernel drivers, related to rfkill: -==================================== - -1. NEVER confuse input device keys and buttons with input device switches. - - 1a. Switches are always set or reset. They report the current state - (on position or off position). - - 1b. Keys and buttons are either in the pressed or not-pressed state, and - that's it. A "button" that latches down when you press it, and - unlatches when you press it again is in fact a switch as far as input - devices go. - -Add the SW_* events you need for switches, do NOT try to emulate a button using -KEY_* events just because there is no such SW_* event yet. Do NOT try to use, -for example, KEY_BLUETOOTH when you should be using SW_BLUETOOTH instead. - -2. Input device switches (sources of EV_SW events) DO store their current state -(so you *must* initialize it by issuing a gratuitous input layer event on -driver start-up and also when resuming from sleep), and that state CAN be -queried from userspace through IOCTLs. There is no sysfs interface for this, -but that doesn't mean you should break things trying to hook it to the rfkill -class to get a sysfs interface :-) - -3. Do not issue *_RFKILL_ALL events by default, unless you are sure it is the -correct event for your switch/button. These events are emergency power-off -events when they are trying to turn the transmitters off. An example of an -input device which SHOULD generate *_RFKILL_ALL events is the wireless-kill -switch in a laptop which is NOT a hotkey, but a real sliding/rocker switch. -An example of an input device which SHOULD NOT generate *_RFKILL_ALL events by -default, is any sort of hot key that is type-specific (e.g. the one for WLAN). - - -3.1 Guidelines for wireless device drivers ------------------------------------------- - -(in this text, rfkill->foo means the foo field of struct rfkill). - -1. Each independent transmitter in a wireless device (usually there is only one -transmitter per device) should have a SINGLE rfkill class attached to it. - -2. If the device does not have any sort of hardware assistance to allow the -driver to rfkill the device, the driver should emulate it by taking all actions -required to silence the transmitter. - -3. If it is impossible to silence the transmitter (i.e. it still emits energy, -even if it is just in brief pulses, when there is no data to transmit and there -is no hardware support to turn it off) do NOT lie to the users. Do not attach -it to a rfkill class. The rfkill subsystem does not deal with data -transmission, it deals with energy emission. If the transmitter is emitting -energy, it is not blocked in rfkill terms. - -4. It doesn't matter if the device has multiple rfkill input lines affecting -the same transmitter, their combined state is to be exported as a single state -per transmitter (see rule 1). - -This rule exists because users of the rfkill subsystem expect to get (and set, -when possible) the overall transmitter rfkill state, not of a particular rfkill -line. - -5. The wireless device driver MUST NOT leave the transmitter enabled during -suspend and hibernation unless: - - 5.1. The transmitter has to be enabled for some sort of functionality - like wake-on-wireless-packet or autonomous packed forwarding in a mesh - network, and that functionality is enabled for this suspend/hibernation - cycle. - -AND - - 5.2. The device was not on a user-requested BLOCKED state before - the suspend (i.e. the driver must NOT unblock a device, not even - to support wake-on-wireless-packet or remain in the mesh). - -In other words, there is absolutely no allowed scenario where a driver can -automatically take action to unblock a rfkill controller (obviously, this deals -with scenarios where soft-blocking or both soft and hard blocking is happening. -Scenarios where hardware rfkill lines are the only ones blocking the -transmitter are outside of this rule, since the wireless device driver does not -control its input hardware rfkill lines in the first place). - -6. During resume, rfkill will try to restore its previous state. - -7. After a rfkill class is suspended, it will *not* call rfkill->toggle_radio -until it is resumed. - - -Example of a WLAN wireless driver connected to the rfkill subsystem: --------------------------------------------------------------------- - -A certain WLAN card has one input pin that causes it to block the transmitter -and makes the status of that input pin available (only for reading!) to the -kernel driver. This is a hard rfkill input line (it cannot be overridden by -the kernel driver). - -The card also has one PCI register that, if manipulated by the driver, causes -it to block the transmitter. This is a soft rfkill input line. - -It has also a thermal protection circuitry that shuts down its transmitter if -the card overheats, and makes the status of that protection available (only for -reading!) to the kernel driver. This is also a hard rfkill input line. - -If either one of these rfkill lines are active, the transmitter is blocked by -the hardware and forced offline. - -The driver should allocate and attach to its struct device *ONE* instance of -the rfkill class (there is only one transmitter). - -It can implement the get_state() hook, and return RFKILL_STATE_HARD_BLOCKED if -either one of its two hard rfkill input lines are active. If the two hard -rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft -rfkill input line is active. Only if none of the rfkill input lines are -active, will it return RFKILL_STATE_UNBLOCKED. - -Since the device has a hardware rfkill line, it IS subject to state changes -external to rfkill. Therefore, the driver must make sure that it calls -rfkill_force_state() to keep the status always up-to-date, and it must do a -rfkill_force_state() on resume from sleep. - -Every time the driver gets a notification from the card that one of its rfkill -lines changed state (polling might be needed on badly designed cards that don't -generate interrupts for such events), it recomputes the rfkill state as per -above, and calls rfkill_force_state() to update it. - -The driver should implement the toggle_radio() hook, that: - -1. Returns an error if one of the hardware rfkill lines are active, and the -caller asked for RFKILL_STATE_UNBLOCKED. - -2. Activates the soft rfkill line if the caller asked for state -RFKILL_STATE_SOFT_BLOCKED. It should do this even if one of the hard rfkill -lines are active, effectively double-blocking the transmitter. +The rfkill class is provided for kernel drivers to register their radio +transmitter with the kernel, provide methods for turning it on and off and, +optionally, letting the system know about hardware-disabled states that may +be implemented on the device. This code is enabled with the CONFIG_RFKILL +Kconfig option, which drivers can "select". -3. Deactivates the soft rfkill line if none of the hardware rfkill lines are -active and the caller asked for RFKILL_STATE_UNBLOCKED. +The rfkill class code also notifies userspace of state changes, this is +achieved via uevents. It also provides some sysfs files for userspace to +check the status of radio transmitters. See the "Userspace support" section +below. -=============================================================================== -4: Kernel API -To build a driver with rfkill subsystem support, the driver should depend on -(or select) the Kconfig symbol RFKILL; it should _not_ depend on RKFILL_INPUT. +The rfkill-input code implements a basic response to rfkill buttons -- it +implements turning on/off all devices of a certain class (or all). -The hardware the driver talks to may be write-only (where the current state -of the hardware is unknown), or read-write (where the hardware can be queried -about its current state). +When the device is hard-blocked (either by a call to rfkill_set_hw_state() +or from query_state) then set_block() will not be invoked. When the device +is hard-unblocked again, rfkill drivers need to take into account the return +value from rfkill_set_hw_state() -- it indicates whether the device is still +soft-blocked or not. -The rfkill class will call the get_state hook of a device every time it needs -to know the *real* current state of the hardware. This can happen often, but -it does not do any polling, so it is not enough on hardware that is subject -to state changes outside of the rfkill subsystem. - -Therefore, calling rfkill_force_state() when a state change happens is -mandatory when the device has a hardware rfkill line, or when something else -like the firmware could cause its state to be changed without going through the -rfkill class. - -Some hardware provides events when its status changes. In these cases, it is -best for the driver to not provide a get_state hook, and instead register the -rfkill class *already* with the correct status, and keep it updated using -rfkill_force_state() when it gets an event from the hardware. - -rfkill_force_state() must be used on the device resume handlers to update the -rfkill status, should there be any chance of the device status changing during -the sleep. - -There is no provision for a statically-allocated rfkill struct. You must -use rfkill_allocate() to allocate one. - -You should: - - rfkill_allocate() - - modify rfkill fields (flags, name) - - modify state to the current hardware state (THIS IS THE ONLY TIME - YOU CAN ACCESS state DIRECTLY) - - rfkill_register() - -The only way to set a device to the RFKILL_STATE_HARD_BLOCKED state is through -a suitable return of get_state() or through rfkill_force_state(). - -When a device is in the RFKILL_STATE_HARD_BLOCKED state, the only way to switch -it to a different state is through a suitable return of get_state() or through -rfkill_force_state(). - -If toggle_radio() is called to set a device to state RFKILL_STATE_SOFT_BLOCKED -when that device is already at the RFKILL_STATE_HARD_BLOCKED state, it should -not return an error. Instead, it should try to double-block the transmitter, -so that its state will change from RFKILL_STATE_HARD_BLOCKED to -RFKILL_STATE_SOFT_BLOCKED should the hardware blocking cease. -Please refer to the source for more documentation. +The entire functionality is spread over more than one subsystem: -=============================================================================== -5: Userspace support + * The kernel input layer generates KEY_WWAN, KEY_WLAN etc. and + SW_RFKILL_ALL -- when the user presses a button. Drivers for radio + transmitters generally do not register to the input layer, unless the + device really provides an input device (i.e. a button that has no + effect other than generating a button press event) -rfkill devices issue uevents (with an action of "change"), with the following -environment variables set: + * The rfkill-input code hooks up to these events and switches the soft-block + of the various radio transmitters, depending on the button type. -RFKILL_NAME -RFKILL_STATE -RFKILL_TYPE + * The rfkill drivers turn off/on their transmitters as requested. -The ABI for these variables is defined by the sysfs attributes. It is best -to take a quick look at the source to make sure of the possible values. + * The rfkill class will generate userspace notifications (uevents) to tell + userspace what the current state is. -It is expected that HAL will trap those, and bridge them to DBUS, etc. These -events CAN and SHOULD be used to give feedback to the user about the rfkill -status of the system. -Input devices may issue events that are related to rfkill. These are the -various KEY_* events and SW_* events supported by rfkill-input.c. -Userspace may not change the state of an rfkill switch in response to an -input event, it should refrain from changing states entirely. +3. Kernel driver guidelines -Userspace cannot assume it is the only source of control for rfkill switches. -Their state can change due to firmware actions, direct user actions, and the -rfkill-input EPO override for *_RFKILL_ALL. -When rfkill-input is not active, userspace must initiate a rfkill status -change by writing to the "state" attribute in order for anything to happen. +Drivers for radio transmitters normally implement only the rfkill class. +These drivers may not unblock the transmitter based on own decisions, they +should act on information provided by the rfkill class only. -Take particular care to implement EV_SW SW_RFKILL_ALL properly. When that -switch is set to OFF, *every* rfkill device *MUST* be immediately put into the -RFKILL_STATE_SOFT_BLOCKED state, no questions asked. +Platform drivers might implement input devices if the rfkill button is just +that, a button. If that button influences the hardware then you need to +implement an rfkill class instead. This also applies if the platform provides +a way to turn on/off the transmitter(s). -The following sysfs entries will be created: +During suspend/hibernation, transmitters should only be left enabled when +wake-on wlan or similar functionality requires it and the device wasn't +blocked before suspend/hibernate. Note that it may be necessary to update +the rfkill subsystem's idea of what the current state is at resume time if +the state may have changed over suspend. + + + +4. Kernel API + +To build a driver with rfkill subsystem support, the driver should depend on +(or select) the Kconfig symbol RFKILL. + +The hardware the driver talks to may be write-only (where the current state +of the hardware is unknown), or read-write (where the hardware can be queried +about its current state). + +Calling rfkill_set_hw_state() when a state change happens is required from +rfkill drivers that control devices that can be hard-blocked unless they also +assign the poll_hw_block() callback (then the rfkill core will poll the +device). Don't do this unless you cannot get the event in any other way. + + + +5. Userspace support + +The following sysfs entries exist for every rfkill device: name: Name assigned by driver to this key (interface or driver name). type: Name of the key type ("wlan", "bluetooth", etc). state: Current state of the transmitter 0: RFKILL_STATE_SOFT_BLOCKED - transmitter is forced off, but one can override it - by a write to the state attribute; + transmitter is turned off by software 1: RFKILL_STATE_UNBLOCKED - transmiter is NOT forced off, and may operate if - all other conditions for such operation are met - (such as interface is up and configured, etc); + transmiter is (potentially) active 2: RFKILL_STATE_HARD_BLOCKED transmitter is forced off by something outside of - the driver's control. One cannot set a device to - this state through writes to the state attribute; - claim: 1: Userspace handles events, 0: Kernel handles events - -Both the "state" and "claim" entries are also writable. For the "state" entry -this means that when 1 or 0 is written, the device rfkill state (if not yet in -the requested state), will be will be toggled accordingly. - -For the "claim" entry writing 1 to it means that the kernel no longer handles -key events even though RFKILL_INPUT input was enabled. When "claim" has been -set to 0, userspace should make sure that it listens for the input events or -check the sysfs "state" entry regularly to correctly perform the required tasks -when the rkfill key is pressed. - -A note about input devices and EV_SW events: - -In order to know the current state of an input device switch (like -SW_RFKILL_ALL), you will need to use an IOCTL. That information is not -available through sysfs in a generic way at this time, and it is not available -through the rfkill class AT ALL. + the driver's control. + claim: 0: Kernel handles events (currently always reads that value) + +rfkill devices also issue uevents (with an action of "change"), with the +following environment variables set: + +RFKILL_NAME +RFKILL_STATE +RFKILL_TYPE + +The contents of these variables corresponds to the "name", "state" and +"type" sysfs files explained above. --- wireless-testing.orig/net/rfkill/Kconfig 2009-03-30 11:33:35.000000000 +0200 +++ wireless-testing/net/rfkill/Kconfig 2009-03-30 11:43:21.000000000 +0200 @@ -10,22 +10,8 @@ menuconfig RFKILL To compile this driver as a module, choose M here: the module will be called rfkill. -config RFKILL_INPUT - tristate "Input layer to RF switch connector" - depends on RFKILL && INPUT - help - Say Y here if you want kernel automatically toggle state - of RF switches on and off when user presses appropriate - button or a key on the keyboard. Without this module you - need a some kind of userspace application to control - state of the switches. - - To compile this driver as a module, choose M here: the - module will be called rfkill-input. - # LED trigger support config RFKILL_LEDS bool depends on RFKILL && LEDS_TRIGGERS default y - --- wireless-testing.orig/net/rfkill/Makefile 2009-03-30 11:33:35.000000000 +0200 +++ wireless-testing/net/rfkill/Makefile 2009-03-30 11:43:37.000000000 +0200 @@ -2,5 +2,5 @@ # Makefile for the RF switch subsystem. # -obj-$(CONFIG_RFKILL) += rfkill.o -obj-$(CONFIG_RFKILL_INPUT) += rfkill-input.o +rfkill-y += core.o input.o +obj-$(CONFIG_RFKILL) += rfkill.o --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ wireless-testing/net/rfkill/core.c 2009-03-31 00:04:25.000000000 +0200 @@ -0,0 +1,752 @@ +/* + * Copyright (C) 2006 - 2007 Ivo van Doorn + * Copyright (C) 2007 Dmitry Torokhov + * Copyright 2009 Johannes Berg <johannes@xxxxxxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/workqueue.h> +#include <linux/capability.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/rfkill.h> + +#include "rfkill.h" + +#define POLL_INTERVAL (5 * HZ) + +struct rfkill { + const char *name; + enum rfkill_type type; + + unsigned long blocked; + + bool registered; + + const struct rfkill_ops *ops; + void *data; + +#ifdef CONFIG_RFKILL_LEDS + struct led_trigger led_trigger; +#endif + + struct device dev; + struct list_head node; + + struct delayed_work poll_work; + struct work_struct uevent_work; +}; +#define to_rfkill(d) container_of(d, struct rfkill, dev) + + + +MODULE_AUTHOR("Ivo van Doorn <IvDoorn@xxxxxxxxx>"); +MODULE_AUTHOR("Johannes Berg <johannes@xxxxxxxxxxxxxxxx>"); +MODULE_DESCRIPTION("RF switch support"); +MODULE_LICENSE("GPL"); + + +static LIST_HEAD(rfkill_list); /* list of registered rf switches */ +static DEFINE_MUTEX(rfkill_global_mutex); + +static unsigned int rfkill_default_state = 1; +module_param_named(default_state, rfkill_default_state, uint, 0444); +MODULE_PARM_DESC(default_state, + "Default initial state for all radio types, 0 = radio off"); + +static struct { + bool cur, def; +} rfkill_global_states[NUM_RFKILL_TYPES]; + +static unsigned long rfkill_states_default_locked; + +static bool rfkill_epo_lock_active; + + +#ifdef CONFIG_RFKILL_LEDS +static void rfkill_led_trigger_activate(struct led_classdev *led) +{ + struct rfkill *rfkill; + struct led_trigger *trigger; + + rfkill = container_of(led->trigger, struct rfkill, led_trigger); + trigger = &rfkill->led_trigger; + + if (!led->name) + return; + + if (rfkill->blocked) + led_trigger_event(trigger, LED_OFF); + else + led_trigger_event(trigger, LED_FULL); +} +#endif /* CONFIG_RFKILL_LEDS */ + +static void rfkill_uevent(struct rfkill *rfkill) +{ + if (!rfkill->registered) + return; + + kobject_uevent(&rfkill->dev.kobj, KOBJ_CHANGE); +} + +bool __rfkill_set_hw_state(struct rfkill *rfkill, bool blocked, bool *change) +{ + bool prev; + + BUG_ON(!rfkill); + + if (blocked) + prev = !!test_and_set_bit(RFKILL_BLOCK_HW_BIT, + &rfkill->blocked); + else + prev = !!test_and_clear_bit(RFKILL_BLOCK_HW_BIT, + &rfkill->blocked); + + *change = prev != blocked; + + return blocked || !!test_bit(RFKILL_BLOCK_SW_BIT, &rfkill->blocked); +} + +/** + * rfkill_set_block - wrapper for set_block method + * + * @rfkill: the rfkill struct to use + * @blocked: the new software state + * + * Calls the set_block method (when applicable) and handles notifications + * etc. as well. + */ +static void rfkill_set_block(struct rfkill *rfkill, bool blocked) +{ + bool prev, change; + + /* + * Some platforms (...!) generate input events which affect the + * _hard_ kill state -- whenever something tries to change the + * current software state query the hardware state too. + */ + if (rfkill->ops->query_state) { + __rfkill_set_hw_state(rfkill, + rfkill->ops->query_state(rfkill->data), + &change); + if (change) + rfkill_uevent(rfkill); + } + + if (blocked) + prev = !!test_and_set_bit(RFKILL_BLOCK_SW_BIT, + &rfkill->blocked); + else + prev = !!test_and_clear_bit(RFKILL_BLOCK_SW_BIT, + &rfkill->blocked); + + /* HW already blocked, so nothing changes */ + if (test_bit(RFKILL_BLOCK_HW_BIT, &rfkill->blocked)) + return; + + if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP)) + return; + + if (rfkill->ops->set_block(rfkill->data, blocked)) { + /* failed -- reset status */ + if (prev) + set_bit(RFKILL_BLOCK_SW_BIT, &rfkill->blocked); + else + clear_bit(RFKILL_BLOCK_SW_BIT, &rfkill->blocked); + } + + rfkill_uevent(rfkill); +} + +/** + * __rfkill_switch_all - Toggle state of all switches of given type + * @type: type of interfaces to be affected + * @state: the new state + * + * This function sets the state of all switches of given type, + * unless a specific switch is claimed by userspace (in which case, + * that switch is left alone) or suspended. + * + * Caller must have acquired rfkill_global_mutex. + */ +static void __rfkill_switch_all(const enum rfkill_type type, bool blocked) +{ + struct rfkill *rfkill; + + rfkill_global_states[type].cur = blocked; + list_for_each_entry(rfkill, &rfkill_list, node) { + if (rfkill->type != type) + continue; + + rfkill_set_block(rfkill, blocked); + } +} + +/** + * rfkill_switch_all - Toggle state of all switches of given type + * @type: type of interfaces to be affected + * @state: the new state + * + * Acquires rfkill_global_mutex and calls __rfkill_switch_all(@type, @state). + * Please refer to __rfkill_switch_all() for details. + * + * Does nothing if the EPO lock is active. + */ +void rfkill_switch_all(enum rfkill_type type, bool blocked) +{ + mutex_lock(&rfkill_global_mutex); + + if (!rfkill_epo_lock_active) + __rfkill_switch_all(type, blocked); + + mutex_unlock(&rfkill_global_mutex); +} +EXPORT_SYMBOL(rfkill_switch_all); + +/** + * rfkill_epo - emergency power off all transmitters + * + * This kicks all non-suspended rfkill devices to RFKILL_STATE_SOFT_BLOCKED, + * ignoring everything in its path but rfkill_global_mutex and rfkill->mutex. + * + * The global state before the EPO is saved and can be restored later + * using rfkill_restore_states(). + */ +void rfkill_epo(void) +{ + struct rfkill *rfkill; + int i; + + mutex_lock(&rfkill_global_mutex); + + rfkill_epo_lock_active = true; + list_for_each_entry(rfkill, &rfkill_list, node) + rfkill_set_block(rfkill, true); + + for (i = 0; i < NUM_RFKILL_TYPES; i++) { + rfkill_global_states[i].def = rfkill_global_states[i].cur; + rfkill_global_states[i].cur = true; + } + mutex_unlock(&rfkill_global_mutex); +} + +/** + * rfkill_restore_states - restore global states + * + * Restore (and sync switches to) the global state from the + * states in rfkill_default_states. This can undo the effects of + * a call to rfkill_epo(). + */ +void rfkill_restore_states(void) +{ + int i; + + mutex_lock(&rfkill_global_mutex); + + rfkill_epo_lock_active = false; + for (i = 0; i < NUM_RFKILL_TYPES; i++) + __rfkill_switch_all(i, rfkill_global_states[i].def); + mutex_unlock(&rfkill_global_mutex); +} + +/** + * rfkill_remove_epo_lock - unlock state changes + * + * Used by rfkill-input manually unlock state changes, when + * the EPO switch is deactivated. + */ +void rfkill_remove_epo_lock(void) +{ + mutex_lock(&rfkill_global_mutex); + rfkill_epo_lock_active = false; + mutex_unlock(&rfkill_global_mutex); +} + +/** + * rfkill_is_epo_lock_active - returns true EPO is active + * + * Returns 0 (false) if there is NOT an active EPO contidion, + * and 1 (true) if there is an active EPO contition, which + * locks all radios in one of the BLOCKED states. + * + * Can be called in atomic context. + */ +bool rfkill_is_epo_lock_active(void) +{ + return rfkill_epo_lock_active; +} + +/** + * rfkill_get_global_sw_state - returns global state for a type + * @type: the type to get the global state of + * + * Returns the current global state for a given wireless + * device type. + */ +bool rfkill_get_global_sw_state(const enum rfkill_type type) +{ + return rfkill_global_states[type].cur; +} + +void rfkill_set_global_sw_state(const enum rfkill_type type, bool blocked) +{ + mutex_lock(&rfkill_global_mutex); + + /* don't allow unblock when epo */ + if (rfkill_epo_lock_active && !blocked) + return; + + /* too late */ + if (rfkill_states_default_locked & BIT(type)) + return; + + rfkill_states_default_locked |= BIT(type); + + rfkill_global_states[type].cur = blocked; + rfkill_global_states[type].def = blocked; + + mutex_unlock(&rfkill_global_mutex); +} +EXPORT_SYMBOL(rfkill_set_global_sw_state); + + +bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked) +{ + bool ret, change; + + ret = __rfkill_set_hw_state(rfkill, blocked, &change); + + if (change) + schedule_work(&rfkill->uevent_work); + + return ret; +} +EXPORT_SYMBOL(rfkill_set_hw_state); + +bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked) +{ + bool prev, hwblock; + + BUG_ON(!rfkill); + + if (blocked) + prev = !!test_and_set_bit(RFKILL_BLOCK_SW_BIT, + &rfkill->blocked); + else + prev = !!test_and_clear_bit(RFKILL_BLOCK_SW_BIT, + &rfkill->blocked); + + hwblock = !!test_bit(RFKILL_BLOCK_HW_BIT, &rfkill->blocked); + + if (prev != blocked && !hwblock) + schedule_work(&rfkill->uevent_work); + + return blocked || hwblock; +} +EXPORT_SYMBOL(rfkill_set_sw_state); + +static ssize_t rfkill_name_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct rfkill *rfkill = to_rfkill(dev); + + return sprintf(buf, "%s\n", rfkill->name); +} + +static const char *rfkill_get_type_str(enum rfkill_type type) +{ + switch (type) { + case RFKILL_TYPE_WLAN: + return "wlan"; + case RFKILL_TYPE_BLUETOOTH: + return "bluetooth"; + case RFKILL_TYPE_UWB: + return "ultrawideband"; + case RFKILL_TYPE_WIMAX: + return "wimax"; + case RFKILL_TYPE_WWAN: + return "wwan"; + default: + BUG(); + } + + BUILD_BUG_ON(NUM_RFKILL_TYPES != RFKILL_TYPE_WWAN + 1); +} + +static ssize_t rfkill_type_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct rfkill *rfkill = to_rfkill(dev); + + return sprintf(buf, "%s\n", rfkill_get_type_str(rfkill->type)); +} + +static u8 user_state_from_blocked(unsigned long *blocked) +{ + if (test_bit(RFKILL_BLOCK_HW_BIT, blocked)) + return RFKILL_USER_STATE_HARD_BLOCKED; + if (test_bit(RFKILL_BLOCK_SW_BIT, blocked)) + return RFKILL_USER_STATE_SOFT_BLOCKED; + + return RFKILL_USER_STATE_UNBLOCKED; +} + +static ssize_t rfkill_state_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct rfkill *rfkill = to_rfkill(dev); + + return sprintf(buf, "%d\n", user_state_from_blocked(&rfkill->blocked)); +} + +static ssize_t rfkill_state_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + /* + * The intention was that userspace can only take control over + * a given device when/if rfkill-input doesn't control it due + * to user_claim. Since user_claim is currently unsupported, + * we never support changing the state from userspace -- this + * can be implemented again later. + */ + + return -EPERM; +} + +static ssize_t rfkill_claim_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%d\n", 0); +} + +static ssize_t rfkill_claim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return -EOPNOTSUPP; +} + +static struct device_attribute rfkill_dev_attrs[] = { + __ATTR(name, S_IRUGO, rfkill_name_show, NULL), + __ATTR(type, S_IRUGO, rfkill_type_show, NULL), + __ATTR(state, S_IRUGO|S_IWUSR, rfkill_state_show, rfkill_state_store), + __ATTR(claim, S_IRUGO|S_IWUSR, rfkill_claim_show, rfkill_claim_store), + __ATTR_NULL +}; + +static void rfkill_release(struct device *dev) +{ + struct rfkill *rfkill = to_rfkill(dev); + + kfree(rfkill); +} + +static int rfkill_dev_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct rfkill *rfkill = to_rfkill(dev); + int error; + + error = add_uevent_var(env, "RFKILL_NAME=%s", rfkill->name); + if (error) + return error; + error = add_uevent_var(env, "RFKILL_TYPE=%s", + rfkill_get_type_str(rfkill->type)); + if (error) + return error; + error = add_uevent_var(env, "RFKILL_STATE=%d", + user_state_from_blocked(&rfkill->blocked)); + return error; +} + +void rfkill_pause_polling(struct rfkill *rfkill) +{ + BUG_ON(!rfkill); + + if (!rfkill->ops->poll_hw_block) + return; + + cancel_delayed_work_sync(&rfkill->poll_work); +} +EXPORT_SYMBOL(rfkill_pause_polling); + +void rfkill_resume_polling(struct rfkill *rfkill) +{ + BUG_ON(!rfkill); + + if (!rfkill->ops->poll_hw_block) + return; + + schedule_work(&rfkill->poll_work.work); +} +EXPORT_SYMBOL(rfkill_resume_polling); + +static int rfkill_suspend(struct device *dev, pm_message_t state) +{ + struct rfkill *rfkill = to_rfkill(dev); + + rfkill_pause_polling(rfkill); + + return 0; +} + +static int rfkill_resume(struct device *dev) +{ + struct rfkill *rfkill = to_rfkill(dev); + + rfkill_resume_polling(rfkill); + + return 0; +} + +static struct class rfkill_class = { + .name = "rfkill", + .dev_release = rfkill_release, + .dev_attrs = rfkill_dev_attrs, + .dev_uevent = rfkill_dev_uevent, + .suspend = rfkill_suspend, + .resume = rfkill_resume, +}; + + +struct rfkill * __must_check rfkill_alloc(const char *name, + struct device *parent, + const enum rfkill_type type, + const struct rfkill_ops *ops, + void *ops_data) +{ + struct rfkill *rfkill; + struct device *dev; + + if (WARN_ON(!ops)) + return NULL; + + if (WARN_ON(!ops->set_block)) + return NULL; + + if (WARN_ON(!name)) + return NULL; + + if (WARN_ON(type >= NUM_RFKILL_TYPES)) + return NULL; + + rfkill = kzalloc(sizeof(*rfkill), GFP_KERNEL); + if (!rfkill) + return NULL; + + INIT_LIST_HEAD(&rfkill->node); + rfkill->type = type; + rfkill->name = name; + rfkill->ops = ops; + rfkill->data = ops_data; + + dev = &rfkill->dev; + dev->class = &rfkill_class; + dev->parent = parent; + device_initialize(dev); + + return rfkill; +} +EXPORT_SYMBOL(rfkill_alloc); + +static int rfkill_led_trigger_register(struct rfkill *rfkill) +{ +#ifdef CONFIG_RFKILL_LEDS + rfkill->led_trigger.name = dev_name(&rfkill->dev); + rfkill->led_trigger.activate = rfkill_led_trigger_activate; + return led_trigger_register(&rfkill->led_trigger); +#endif + return 0; +} + +static void rfkill_led_trigger_unregister(struct rfkill *rfkill) +{ +#ifdef CONFIG_RFKILL_LEDS + led_trigger_unregister(&rfkill->led_trigger); +#endif +} + +static void rfkill_poll(struct work_struct *work) +{ + struct rfkill *rfkill; + bool change, hwblocked; + + rfkill = container_of(work, struct rfkill, poll_work.work); + + /* poll hardware state */ + hwblocked = rfkill->ops->poll_hw_block(rfkill->data); + + /* + * Set hardware state and tell driver to unblock if + * it wasn't software-blocked -- driver doesn't need + * to keep track of the current software block state + * that way. + * If that fails set the software block bit. + */ + if (!__rfkill_set_hw_state(rfkill, hwblocked, &change)) + if (rfkill->ops->set_block(rfkill->data, false)) { + change = true; + set_bit(RFKILL_BLOCK_SW_BIT, &rfkill->blocked); + } + + if (change) + rfkill_uevent(rfkill); + + schedule_delayed_work(&rfkill->poll_work, + round_jiffies_relative(POLL_INTERVAL)); +} + +static void rfkill_uevent_work(struct work_struct *work) +{ + struct rfkill *rfkill; + + rfkill = container_of(work, struct rfkill, uevent_work); + + rfkill_uevent(rfkill); +} + +int __must_check rfkill_register(struct rfkill *rfkill) +{ + static unsigned long rfkill_no = 0; + struct device *dev = &rfkill->dev; + int error; + + BUG_ON(!rfkill); + + mutex_lock(&rfkill_global_mutex); + + if (rfkill->registered) { + error = -EALREADY; + goto unlock; + } + + dev_set_name(dev, "rfkill%lu", rfkill_no); + rfkill_no++; + + if (!(rfkill_states_default_locked & BIT(rfkill->type))) { + /* first of its kind */ + BUILD_BUG_ON(NUM_RFKILL_TYPES > + sizeof(rfkill_states_default_locked) * 8); + rfkill_states_default_locked |= BIT(rfkill->type); + rfkill_global_states[rfkill->type].cur = + rfkill_global_states[rfkill->type].def; + } + + /* XXX: schedule work to set default state */ + + list_add_tail(&rfkill->node, &rfkill_list); + + error = device_add(dev); + if (error) + goto remove; + + error = rfkill_led_trigger_register(rfkill); + if (error) + goto devdel; + + rfkill->registered = true; + + if (rfkill->ops->poll_hw_block) { + INIT_DELAYED_WORK(&rfkill->poll_work, rfkill_poll); + schedule_delayed_work(&rfkill->poll_work, + round_jiffies_relative(POLL_INTERVAL)); + } + + INIT_WORK(&rfkill->uevent_work, rfkill_uevent_work); + + return 0; + + devdel: + device_del(&rfkill->dev); + remove: + list_del_init(&rfkill->node); + unlock: + mutex_unlock(&rfkill_global_mutex); + return error; +} +EXPORT_SYMBOL(rfkill_register); + +void rfkill_unregister(struct rfkill *rfkill) +{ + BUG_ON(!rfkill); + + if (rfkill->ops->poll_hw_block) + cancel_delayed_work_sync(&rfkill->poll_work); + + cancel_work_sync(&rfkill->uevent_work); + + rfkill->registered = false; + + device_del(&rfkill->dev); + + mutex_lock(&rfkill_global_mutex); + list_del_init(&rfkill->node); + mutex_unlock(&rfkill_global_mutex); + + rfkill_led_trigger_unregister(rfkill); +} +EXPORT_SYMBOL(rfkill_unregister); + +void rfkill_destroy(struct rfkill *rfkill) +{ + if (rfkill) + put_device(&rfkill->dev); +} +EXPORT_SYMBOL(rfkill_destroy); + +const char *rfkill_get_led_name(struct rfkill *rfkill) +{ + return rfkill->led_trigger.name; +} +EXPORT_SYMBOL(rfkill_get_led_name); + + +static int __init rfkill_init(void) +{ + int error; + int i; + + for (i = 0; i < NUM_RFKILL_TYPES; i++) + rfkill_global_states[i].def = !rfkill_default_state; + + error = class_register(&rfkill_class); + if (error) + goto out; + + error = rfkill_handler_init(); + if (error) + class_unregister(&rfkill_class); + + out: + return error; +} +subsys_initcall(rfkill_init); + +static void __exit rfkill_exit(void) +{ + rfkill_handler_exit(); + class_unregister(&rfkill_class); +} +module_exit(rfkill_exit); --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ wireless-testing/net/rfkill/input.c 2009-03-30 20:31:14.000000000 +0200 @@ -0,0 +1,337 @@ +/* + * Input layer to RF Kill interface connector + * + * Copyright (c) 2007 Dmitry Torokhov + * Copyright 2009 Johannes Berg <johannes@xxxxxxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * If you ever run into a situation in which you have a SW_ type rfkill + * input device, then you can revive code that was removed in the patch + * "rfkill-input: remove unused code". + */ + +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <linux/init.h> +#include <linux/rfkill.h> +#include <linux/sched.h> + +#include "rfkill.h" + +enum rfkill_input_master_mode { + RFKILL_INPUT_MASTER_UNLOCK = 0, + RFKILL_INPUT_MASTER_RESTORE = 1, + RFKILL_INPUT_MASTER_UNBLOCKALL = 2, + NUM_RFKILL_INPUT_MASTER_MODES +}; + +/* Delay (in ms) between consecutive switch ops */ +#define RFKILL_OPS_DELAY 200 + +static enum rfkill_input_master_mode rfkill_master_switch_mode = + RFKILL_INPUT_MASTER_UNBLOCKALL; +module_param_named(master_switch_mode, rfkill_master_switch_mode, uint, 0); +MODULE_PARM_DESC(master_switch_mode, + "SW_RFKILL_ALL ON should: 0=do nothing (only unlock); 1=restore; 2=unblock all"); + +static spinlock_t rfkill_op_lock; +static bool rfkill_op_pending; +static unsigned long rfkill_sw_pending[BITS_TO_LONGS(NUM_RFKILL_TYPES)]; +static unsigned long rfkill_sw_state[BITS_TO_LONGS(NUM_RFKILL_TYPES)]; + +enum rfkill_sched_op { + RFKILL_GLOBAL_OP_EPO = 0, + RFKILL_GLOBAL_OP_RESTORE, + RFKILL_GLOBAL_OP_UNLOCK, + RFKILL_GLOBAL_OP_UNBLOCK, +}; + +static enum rfkill_sched_op rfkill_master_switch_op; +static enum rfkill_sched_op rfkill_op; + +static void __rfkill_handle_global_op(enum rfkill_sched_op op) +{ + unsigned int i; + + switch (op) { + case RFKILL_GLOBAL_OP_EPO: + rfkill_epo(); + break; + case RFKILL_GLOBAL_OP_RESTORE: + rfkill_restore_states(); + break; + case RFKILL_GLOBAL_OP_UNLOCK: + rfkill_remove_epo_lock(); + break; + case RFKILL_GLOBAL_OP_UNBLOCK: + rfkill_remove_epo_lock(); + for (i = 0; i < NUM_RFKILL_TYPES; i++) + rfkill_switch_all(i, false); + break; + default: + /* memory corruption or bug, fail safely */ + rfkill_epo(); + WARN(1, "Unknown requested operation %d! " + "rfkill Emergency Power Off activated\n", + op); + } +} + +static void __rfkill_handle_normal_op(const enum rfkill_type type, + const bool complement) +{ + bool blocked; + + blocked = rfkill_get_global_sw_state(type); + if (complement) + blocked = !blocked; + + rfkill_switch_all(type, blocked); +} + +static void rfkill_op_handler(struct work_struct *work) +{ + unsigned int i; + bool c; + + spin_lock_irq(&rfkill_op_lock); + do { + if (rfkill_op_pending) { + enum rfkill_sched_op op = rfkill_op; + rfkill_op_pending = false; + memset(rfkill_sw_pending, 0, + sizeof(rfkill_sw_pending)); + spin_unlock_irq(&rfkill_op_lock); + + __rfkill_handle_global_op(op); + + spin_lock_irq(&rfkill_op_lock); + } + + if (rfkill_is_epo_lock_active()) + continue; + + for (i = 0; i < NUM_RFKILL_TYPES; i++) { + if (!rfkill_op_pending) + break; + if (!__test_and_clear_bit(i, rfkill_sw_pending)) + break; + c = __test_and_clear_bit(i, rfkill_sw_state); + spin_unlock_irq(&rfkill_op_lock); + + __rfkill_handle_normal_op(i, c); + + spin_lock_irq(&rfkill_op_lock); + } + } while (rfkill_op_pending); + spin_unlock_irq(&rfkill_op_lock); +} + +static DECLARE_DELAYED_WORK(rfkill_op_work, rfkill_op_handler); +static unsigned long rfkill_last_scheduled; + +static unsigned long rfkill_ratelimit(const unsigned long last) +{ + const unsigned long delay = msecs_to_jiffies(RFKILL_OPS_DELAY); + return (time_after(jiffies, last + delay)) ? 0 : delay; +} + +static void rfkill_schedule_ratelimited(void) +{ + if (delayed_work_pending(&rfkill_op_work)) + return; + schedule_delayed_work(&rfkill_op_work, + rfkill_ratelimit(rfkill_last_scheduled)); + rfkill_last_scheduled = jiffies; +} + +static void rfkill_schedule_global_op(enum rfkill_sched_op op) +{ + unsigned long flags; + + spin_lock_irqsave(&rfkill_op_lock, flags); + rfkill_op = op; + rfkill_op_pending = true; + if (op == RFKILL_GLOBAL_OP_EPO && !rfkill_is_epo_lock_active()) { + /* bypass the limiter for EPO */ + cancel_delayed_work(&rfkill_op_work); + schedule_delayed_work(&rfkill_op_work, 0); + rfkill_last_scheduled = jiffies; + } else + rfkill_schedule_ratelimited(); + spin_unlock_irqrestore(&rfkill_op_lock, flags); +} + +static void rfkill_schedule_toggle(enum rfkill_type type) +{ + unsigned long flags; + + if (rfkill_is_epo_lock_active()) + return; + + spin_lock_irqsave(&rfkill_op_lock, flags); + if (!rfkill_op_pending) { + __set_bit(type, rfkill_sw_pending); + __change_bit(type, rfkill_sw_state); + rfkill_schedule_ratelimited(); + } + spin_unlock_irqrestore(&rfkill_op_lock, flags); +} + +static void rfkill_schedule_evsw_rfkillall(int state) +{ + if (state) + rfkill_schedule_global_op(rfkill_master_switch_op); + else + rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO); +} + +static void rfkill_event(struct input_handle *handle, unsigned int type, + unsigned int code, int data) +{ + if (type == EV_KEY && data == 1) { + switch (code) { + case KEY_WLAN: + rfkill_schedule_toggle(RFKILL_TYPE_WLAN); + break; + case KEY_BLUETOOTH: + rfkill_schedule_toggle(RFKILL_TYPE_BLUETOOTH); + break; + case KEY_UWB: + rfkill_schedule_toggle(RFKILL_TYPE_UWB); + break; + case KEY_WIMAX: + rfkill_schedule_toggle(RFKILL_TYPE_WIMAX); + break; + } + } else if (type == EV_SW && code == SW_RFKILL_ALL) + rfkill_schedule_evsw_rfkillall(data); +} + +static int rfkill_connect(struct input_handler *handler, struct input_dev *dev, + const struct input_device_id *id) +{ + struct input_handle *handle; + int error; + + handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL); + if (!handle) + return -ENOMEM; + + handle->dev = dev; + handle->handler = handler; + handle->name = "rfkill"; + + /* causes rfkill_start() to be called */ + error = input_register_handle(handle); + if (error) + goto err_free_handle; + + error = input_open_device(handle); + if (error) + goto err_unregister_handle; + + return 0; + + err_unregister_handle: + input_unregister_handle(handle); + err_free_handle: + kfree(handle); + return error; +} + +static void rfkill_start(struct input_handle *handle) +{ + /* + * Take event_lock to guard against configuration changes, we + * should be able to deal with concurrency with rfkill_event() + * just fine (which event_lock will also avoid). + */ + spin_lock_irq(&handle->dev->event_lock); + + if (test_bit(EV_SW, handle->dev->evbit) && + test_bit(SW_RFKILL_ALL, handle->dev->swbit)) + rfkill_schedule_evsw_rfkillall(test_bit(SW_RFKILL_ALL, + handle->dev->sw)); + + spin_unlock_irq(&handle->dev->event_lock); +} + +static void rfkill_disconnect(struct input_handle *handle) +{ + input_close_device(handle); + input_unregister_handle(handle); + kfree(handle); +} + +static const struct input_device_id rfkill_ids[] = { + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(KEY_WLAN)] = BIT_MASK(KEY_WLAN) }, + }, + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(KEY_BLUETOOTH)] = BIT_MASK(KEY_BLUETOOTH) }, + }, + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(KEY_UWB)] = BIT_MASK(KEY_UWB) }, + }, + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(KEY_WIMAX)] = BIT_MASK(KEY_WIMAX) }, + }, + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_SWBIT, + .evbit = { BIT(EV_SW) }, + .swbit = { [BIT_WORD(SW_RFKILL_ALL)] = BIT_MASK(SW_RFKILL_ALL) }, + }, + { } +}; + +static struct input_handler rfkill_handler = { + .name = "rfkill", + .event = rfkill_event, + .connect = rfkill_connect, + .start = rfkill_start, + .disconnect = rfkill_disconnect, + .id_table = rfkill_ids, +}; + +int __init rfkill_handler_init(void) +{ + switch (rfkill_master_switch_mode) { + case RFKILL_INPUT_MASTER_UNBLOCKALL: + rfkill_master_switch_op = RFKILL_GLOBAL_OP_UNBLOCK; + break; + case RFKILL_INPUT_MASTER_RESTORE: + rfkill_master_switch_op = RFKILL_GLOBAL_OP_RESTORE; + break; + case RFKILL_INPUT_MASTER_UNLOCK: + rfkill_master_switch_op = RFKILL_GLOBAL_OP_UNLOCK; + break; + default: + return -EINVAL; + } + + spin_lock_init(&rfkill_op_lock); + + /* Avoid delay at first schedule */ + rfkill_last_scheduled = + jiffies - msecs_to_jiffies(RFKILL_OPS_DELAY) - 1; + return input_register_handler(&rfkill_handler); +} + +void __exit rfkill_handler_exit(void) +{ + input_unregister_handler(&rfkill_handler); + cancel_delayed_work_sync(&rfkill_op_work); +} --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ wireless-testing/net/rfkill/rfkill.h 2009-03-30 11:33:53.000000000 +0200 @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2007 Ivo van Doorn + * Copyright 2009 Johannes Berg <johannes@xxxxxxxxxxxxxxxx> + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __RFKILL_INPUT_H +#define __RFKILL_INPUT_H + +/* core code */ +void rfkill_switch_all(const enum rfkill_type type, bool blocked); +void rfkill_epo(void); +void rfkill_restore_states(void); +void rfkill_remove_epo_lock(void); +bool rfkill_is_epo_lock_active(void); +bool rfkill_get_global_sw_state(const enum rfkill_type type); + +/* input handler */ +int rfkill_handler_init(void); +void rfkill_handler_exit(void); + +#endif /* __RFKILL_INPUT_H */ --- wireless-testing.orig/MAINTAINERS 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/MAINTAINERS 2009-03-30 12:26:40.000000000 +0200 @@ -3667,9 +3667,9 @@ L: reiserfs-devel@xxxxxxxxxxxxxxx S: Supported RFKILL -P: Ivo van Doorn -M: IvDoorn@xxxxxxxxx -L: netdev@xxxxxxxxxxxxxxx +P: Johannes Berg +M: johannes@xxxxxxxxxxxxxxxx +L: linux-wireless@xxxxxxxxxxxxxxx S: Maintained F: net/rfkill --- wireless-testing.orig/include/linux/Kbuild 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/include/linux/Kbuild 2009-03-30 11:33:53.000000000 +0200 @@ -310,6 +310,7 @@ unifdef-y += ptrace.h unifdef-y += qnx4_fs.h unifdef-y += quota.h unifdef-y += random.h +unifdef-y += rfkill.h unifdef-y += irqnr.h unifdef-y += reboot.h unifdef-y += reiserfs_fs.h --- wireless-testing.orig/drivers/net/wireless/ath9k/ath9k.h 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/net/wireless/ath9k/ath9k.h 2009-03-30 11:33:53.000000000 +0200 @@ -486,12 +486,9 @@ struct ath_led { bool registered; }; -/* Rfkill */ -#define ATH_RFKILL_POLL_INTERVAL 2000 /* msecs */ - struct ath_rfkill { struct rfkill *rfkill; - struct delayed_work rfkill_poll; + struct rfkill_ops ops; char rfkill_name[32]; }; @@ -536,8 +533,6 @@ struct ath_rfkill { #define SC_OP_RXFLUSH BIT(8) #define SC_OP_LED_ASSOCIATED BIT(9) #define SC_OP_RFKILL_REGISTERED BIT(10) -#define SC_OP_RFKILL_SW_BLOCKED BIT(11) -#define SC_OP_RFKILL_HW_BLOCKED BIT(12) #define SC_OP_WAIT_FOR_BEACON BIT(13) #define SC_OP_LED_ON BIT(14) #define SC_OP_SCANNING BIT(15) --- wireless-testing.orig/drivers/net/wireless/ath9k/pci.c 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/net/wireless/ath9k/pci.c 2009-03-30 11:33:53.000000000 +0200 @@ -227,11 +227,6 @@ static int ath_pci_suspend(struct pci_de ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); -#endif - pci_save_state(pdev); pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); @@ -256,16 +251,6 @@ static int ath_pci_resume(struct pci_dev AR_GPIO_OUTPUT_MUX_AS_OUTPUT); ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - /* - * check the h/w rfkill state on resume - * and start the rfkill poll timer - */ - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - queue_delayed_work(sc->hw->workqueue, - &sc->rf_kill.rfkill_poll, 0); -#endif - return 0; } --- wireless-testing.orig/drivers/net/wireless/b43/Kconfig 2009-03-30 11:33:43.000000000 +0200 +++ wireless-testing/drivers/net/wireless/b43/Kconfig 2009-03-30 11:33:53.000000000 +0200 @@ -103,7 +103,7 @@ config B43_LEDS # if it's possible. config B43_RFKILL bool - depends on B43 && (RFKILL = y || RFKILL = B43) && RFKILL_INPUT && (INPUT_POLLDEV = y || INPUT_POLLDEV = B43) + depends on B43 && (RFKILL = y || RFKILL = B43) && (INPUT_POLLDEV = y || INPUT_POLLDEV = B43) default y config B43_DEBUG --- wireless-testing.orig/drivers/net/wireless/b43/rfkill.h 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/net/wireless/b43/rfkill.h 2009-03-30 20:55:47.000000000 +0200 @@ -7,14 +7,11 @@ struct b43_wldev; #ifdef CONFIG_B43_RFKILL #include <linux/rfkill.h> -#include <linux/input-polldev.h> struct b43_rfkill { /* The RFKILL subsystem data structure */ struct rfkill *rfkill; - /* The poll device for the RFKILL input button */ - struct input_polled_dev *poll_dev; /* Did initialization succeed? Used for freeing. */ bool registered; /* The unique name of this rfkill switch */ @@ -26,7 +23,7 @@ struct b43_rfkill { void b43_rfkill_init(struct b43_wldev *dev); void b43_rfkill_exit(struct b43_wldev *dev); -char * b43_rfkill_led_name(struct b43_wldev *dev); +const char *b43_rfkill_led_name(struct b43_wldev *dev); #else /* CONFIG_B43_RFKILL */ --- wireless-testing.orig/drivers/net/wireless/b43legacy/Kconfig 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/net/wireless/b43legacy/Kconfig 2009-03-30 11:33:53.000000000 +0200 @@ -48,7 +48,7 @@ config B43LEGACY_LEDS # if it's possible. config B43LEGACY_RFKILL bool - depends on B43LEGACY && (RFKILL = y || RFKILL = B43LEGACY) && RFKILL_INPUT && (INPUT_POLLDEV = y || INPUT_POLLDEV = B43LEGACY) + depends on B43LEGACY && (RFKILL = y || RFKILL = B43LEGACY) && (INPUT_POLLDEV = y || INPUT_POLLDEV = B43LEGACY) default y config B43LEGACY_DEBUG --- wireless-testing.orig/drivers/net/wireless/b43legacy/leds.c 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/net/wireless/b43legacy/leds.c 2009-03-30 11:33:53.000000000 +0200 @@ -86,7 +86,8 @@ static void b43legacy_led_brightness_set static int b43legacy_register_led(struct b43legacy_wldev *dev, struct b43legacy_led *led, - const char *name, char *default_trigger, + const char *name, + const char *default_trigger, u8 led_index, bool activelow) { int err; --- wireless-testing.orig/drivers/net/wireless/b43legacy/rfkill.h 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/net/wireless/b43legacy/rfkill.h 2009-03-30 20:55:55.000000000 +0200 @@ -6,16 +6,12 @@ struct b43legacy_wldev; #ifdef CONFIG_B43LEGACY_RFKILL #include <linux/rfkill.h> -#include <linux/workqueue.h> -#include <linux/input-polldev.h> struct b43legacy_rfkill { /* The RFKILL subsystem data structure */ struct rfkill *rfkill; - /* The poll device for the RFKILL input button */ - struct input_polled_dev *poll_dev; /* Did initialization succeed? Used for freeing. */ bool registered; /* The unique name of this rfkill switch */ @@ -27,7 +23,7 @@ struct b43legacy_rfkill { void b43legacy_rfkill_init(struct b43legacy_wldev *dev); void b43legacy_rfkill_exit(struct b43legacy_wldev *dev); -char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev); +const char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev); #else /* CONFIG_B43LEGACY_RFKILL */ --- wireless-testing.orig/drivers/net/wireless/b43/leds.c 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/net/wireless/b43/leds.c 2009-03-30 11:33:53.000000000 +0200 @@ -87,7 +87,7 @@ static void b43_led_brightness_set(struc } static int b43_register_led(struct b43_wldev *dev, struct b43_led *led, - const char *name, char *default_trigger, + const char *name, const char *default_trigger, u8 led_index, bool activelow) { int err; --- wireless-testing.orig/drivers/net/wireless/iwlwifi/Kconfig 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/net/wireless/iwlwifi/Kconfig 2009-03-30 11:33:53.000000000 +0200 @@ -5,15 +5,14 @@ config IWLWIFI select FW_LOADER select MAC80211_LEDS if IWLWIFI_LEDS select LEDS_CLASS if IWLWIFI_LEDS - select RFKILL if IWLWIFI_RFKILL config IWLWIFI_LEDS bool "Enable LED support in iwlagn and iwl3945 drivers" depends on IWLWIFI config IWLWIFI_RFKILL - bool "Enable RF kill support in iwlagn and iwl3945 drivers" - depends on IWLWIFI + def_bool y + depends on IWLWIFI && RFKILL config IWLWIFI_SPECTRUM_MEASUREMENT bool "Enable Spectrum Measurement in iwlagn driver" --- wireless-testing.orig/drivers/net/wireless/b43/phy_lp.c 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/net/wireless/b43/phy_lp.c 2009-03-30 11:33:53.000000000 +0200 @@ -488,7 +488,7 @@ static void b43_lpphy_op_radio_write(str } static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev, - enum rfkill_state state) + bool blocked) { //TODO } --- wireless-testing.orig/drivers/platform/x86/Kconfig 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/platform/x86/Kconfig 2009-03-30 11:33:53.000000000 +0200 @@ -21,7 +21,6 @@ config ACER_WMI depends on NEW_LEDS depends on BACKLIGHT_CLASS_DEVICE depends on SERIO_I8042 - depends on RFKILL select ACPI_WMI ---help--- This is a driver for newer Acer (and Wistron) laptops. It adds @@ -60,7 +59,6 @@ config DELL_LAPTOP depends on DCDBAS depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE - depends on RFKILL depends on POWER_SUPPLY default n ---help--- @@ -107,7 +105,6 @@ config HP_WMI tristate "HP WMI extras" depends on ACPI_WMI depends on INPUT - depends on RFKILL help Say Y here if you want to support WMI-based hotkeys on HP laptops and to read data from WMI such as docking or ambient light sensor state. @@ -192,7 +189,6 @@ config THINKPAD_ACPI select NEW_LEDS select LEDS_CLASS select NET - select RFKILL ---help--- This is a driver for the IBM and Lenovo ThinkPad laptops. It adds support for Fn-Fx key combinations, Bluetooth control, video @@ -305,7 +301,6 @@ config EEEPC_LAPTOP depends on EXPERIMENTAL select BACKLIGHT_CLASS_DEVICE select HWMON - select RFKILL ---help--- This driver supports the Fn-Fx keys on Eee PC laptops. It also adds the ability to switch camera/wlan on/off. @@ -372,7 +367,6 @@ config ACPI_TOSHIBA depends on INPUT select INPUT_POLLDEV select NET - select RFKILL select BACKLIGHT_CLASS_DEVICE ---help--- This driver adds support for access to certain system settings --- wireless-testing.orig/drivers/platform/x86/acer-wmi.c 2009-03-30 11:33:53.000000000 +0200 +++ wireless-testing/drivers/platform/x86/acer-wmi.c 2009-03-30 23:33:32.000000000 +0200 @@ -939,58 +939,50 @@ static void acer_rfkill_update(struct wo status = get_u32(&state, ACER_CAP_WIRELESS); if (ACPI_SUCCESS(status)) - rfkill_force_state(wireless_rfkill, state ? - RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED); + rfkill_set_sw_state(wireless_rfkill, !!state); if (has_cap(ACER_CAP_BLUETOOTH)) { status = get_u32(&state, ACER_CAP_BLUETOOTH); if (ACPI_SUCCESS(status)) - rfkill_force_state(bluetooth_rfkill, state ? - RFKILL_STATE_UNBLOCKED : - RFKILL_STATE_SOFT_BLOCKED); + rfkill_set_sw_state(bluetooth_rfkill, !!state); } schedule_delayed_work(&acer_rfkill_work, round_jiffies_relative(HZ)); } -static int acer_rfkill_set(void *data, enum rfkill_state state) +static int acer_rfkill_set(void *data, bool blocked) { acpi_status status; - u32 *cap = data; - status = set_u32((u32) (state == RFKILL_STATE_UNBLOCKED), *cap); + u32 cap = (unsigned long)data; + status = set_u32(!!blocked, cap); if (ACPI_FAILURE(status)) return -ENODEV; return 0; } -static struct rfkill * acer_rfkill_register(struct device *dev, -enum rfkill_type type, char *name, u32 cap) +static const struct rfkill_ops acer_rfkill_ops = { + .set_block = acer_rfkill_set, +}; + +static struct rfkill *acer_rfkill_register(struct device *dev, + enum rfkill_type type, + char *name, u32 cap) { int err; u32 state; - u32 *data; struct rfkill *rfkill_dev; - rfkill_dev = rfkill_allocate(dev, type); + rfkill_dev = rfkill_alloc(name, dev, type, + &acer_rfkill_ops, + (void *)(unsigned long)cap); if (!rfkill_dev) return ERR_PTR(-ENOMEM); - rfkill_dev->name = name; get_u32(&state, cap); - rfkill_dev->state = state ? RFKILL_STATE_UNBLOCKED : - RFKILL_STATE_SOFT_BLOCKED; - data = kzalloc(sizeof(u32), GFP_KERNEL); - if (!data) { - rfkill_free(rfkill_dev); - return ERR_PTR(-ENOMEM); - } - *data = cap; - rfkill_dev->data = data; - rfkill_dev->toggle_radio = acer_rfkill_set; + rfkill_set_sw_state(rfkill_dev, !state); err = rfkill_register(rfkill_dev); if (err) { - kfree(rfkill_dev->data); - rfkill_free(rfkill_dev); + rfkill_destroy(rfkill_dev); return ERR_PTR(err); } return rfkill_dev; @@ -1008,8 +1000,8 @@ static int acer_rfkill_init(struct devic RFKILL_TYPE_BLUETOOTH, "acer-bluetooth", ACER_CAP_BLUETOOTH); if (IS_ERR(bluetooth_rfkill)) { - kfree(wireless_rfkill->data); rfkill_unregister(wireless_rfkill); + rfkill_destroy(wireless_rfkill); return PTR_ERR(bluetooth_rfkill); } } @@ -1022,11 +1014,13 @@ static int acer_rfkill_init(struct devic static void acer_rfkill_exit(void) { cancel_delayed_work_sync(&acer_rfkill_work); - kfree(wireless_rfkill->data); + rfkill_unregister(wireless_rfkill); + rfkill_destroy(wireless_rfkill); + if (has_cap(ACER_CAP_BLUETOOTH)) { - kfree(bluetooth_rfkill->data); rfkill_unregister(bluetooth_rfkill); + rfkill_destroy(bluetooth_rfkill); } return; } --- wireless-testing.orig/drivers/platform/x86/dell-laptop.c 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/drivers/platform/x86/dell-laptop.c 2009-03-30 23:34:06.000000000 +0200 @@ -174,10 +174,11 @@ dell_send_request(struct calling_interfa result[3]: NVRAM format version number */ -static int dell_rfkill_set(int radio, enum rfkill_state state) +static int dell_rfkill_set(void *data, bool blocked) { struct calling_interface_buffer buffer; - int disable = (state == RFKILL_STATE_UNBLOCKED) ? 0 : 1; + int disable = blocked ? 0 : 1; + unsigned long radio = (unsigned long)data; memset(&buffer, 0, sizeof(struct calling_interface_buffer)); buffer.input[0] = (1 | (radio<<8) | (disable << 16)); @@ -186,56 +187,26 @@ static int dell_rfkill_set(int radio, en return 0; } -static int dell_wifi_set(void *data, enum rfkill_state state) -{ - return dell_rfkill_set(1, state); -} - -static int dell_bluetooth_set(void *data, enum rfkill_state state) -{ - return dell_rfkill_set(2, state); -} - -static int dell_wwan_set(void *data, enum rfkill_state state) -{ - return dell_rfkill_set(3, state); -} - -static int dell_rfkill_get(int bit, enum rfkill_state *state) +static bool dell_rfkill_poll(void *data) { struct calling_interface_buffer buffer; int status; - int new_state = RFKILL_STATE_HARD_BLOCKED; + int bit = (unsigned long)data + 16; memset(&buffer, 0, sizeof(struct calling_interface_buffer)); dell_send_request(&buffer, 17, 11); status = buffer.output[1]; - if (status & (1<<16)) - new_state = RFKILL_STATE_SOFT_BLOCKED; - - if (status & (1<<bit)) - *state = new_state; - else - *state = RFKILL_STATE_UNBLOCKED; - - return 0; -} + if (status & BIT(bit)) + return !!(status & BIT(16)); -static int dell_wifi_get(void *data, enum rfkill_state *state) -{ - return dell_rfkill_get(17, state); + return false; } -static int dell_bluetooth_get(void *data, enum rfkill_state *state) -{ - return dell_rfkill_get(18, state); -} - -static int dell_wwan_get(void *data, enum rfkill_state *state) -{ - return dell_rfkill_get(19, state); -} +static const struct rfkill_ops dell_rfkill_ops = { + .set_block = dell_rfkill_set, + .poll_hw_block = dell_rfkill_poll, +}; static int dell_setup_rfkill(void) { @@ -248,36 +219,37 @@ static int dell_setup_rfkill(void) status = buffer.output[1]; if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) { - wifi_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_WLAN); - if (!wifi_rfkill) + wifi_rfkill = rfkill_alloc("dell-wifi", NULL, RFKILL_TYPE_WLAN, + &dell_rfkill_ops, (void *) 1); + if (!wifi_rfkill) { + ret = -ENOMEM; goto err_wifi; - wifi_rfkill->name = "dell-wifi"; - wifi_rfkill->toggle_radio = dell_wifi_set; - wifi_rfkill->get_state = dell_wifi_get; + } ret = rfkill_register(wifi_rfkill); if (ret) goto err_wifi; } if ((status & (1<<3|1<<9)) == (1<<3|1<<9)) { - bluetooth_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_BLUETOOTH); - if (!bluetooth_rfkill) + bluetooth_rfkill = rfkill_alloc("dell-bluetooth", NULL, + RFKILL_TYPE_BLUETOOTH, + &dell_rfkill_ops, (void *) 2); + if (!bluetooth_rfkill) { + ret = -ENOMEM; goto err_bluetooth; - bluetooth_rfkill->name = "dell-bluetooth"; - bluetooth_rfkill->toggle_radio = dell_bluetooth_set; - bluetooth_rfkill->get_state = dell_bluetooth_get; + } ret = rfkill_register(bluetooth_rfkill); if (ret) goto err_bluetooth; } if ((status & (1<<4|1<<10)) == (1<<4|1<<10)) { - wwan_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_WWAN); - if (!wwan_rfkill) + wwan_rfkill = rfkill_alloc("dell-wwan", NULL, RFKILL_TYPE_WWAN, + &dell_rfkill_ops, (void *) 3); + if (!wwan_rfkill) { + ret = -ENOMEM; goto err_wwan; - wwan_rfkill->name = "dell-wwan"; - wwan_rfkill->toggle_radio = dell_wwan_set; - wwan_rfkill->get_state = dell_wwan_get; + } ret = rfkill_register(wwan_rfkill); if (ret) goto err_wwan; @@ -285,22 +257,15 @@ static int dell_setup_rfkill(void) return 0; err_wwan: - if (wwan_rfkill) - rfkill_free(wwan_rfkill); - if (bluetooth_rfkill) { + rfkill_destroy(wwan_rfkill); + if (bluetooth_rfkill) rfkill_unregister(bluetooth_rfkill); - bluetooth_rfkill = NULL; - } err_bluetooth: - if (bluetooth_rfkill) - rfkill_free(bluetooth_rfkill); - if (wifi_rfkill) { + rfkill_destroy(bluetooth_rfkill); + if (wifi_rfkill) rfkill_unregister(wifi_rfkill); - wifi_rfkill = NULL; - } err_wifi: - if (wifi_rfkill) - rfkill_free(wifi_rfkill); + rfkill_destroy(wifi_rfkill); return ret; } --- wireless-testing.orig/drivers/platform/x86/hp-wmi.c 2009-03-30 11:33:53.000000000 +0200 +++ wireless-testing/drivers/platform/x86/hp-wmi.c 2009-03-30 23:34:46.000000000 +0200 @@ -152,58 +152,46 @@ static int hp_wmi_dock_state(void) return hp_wmi_perform_query(HPWMI_DOCK_QUERY, 0, 0); } -static int hp_wmi_wifi_set(void *data, enum rfkill_state state) +static int hp_wmi_set_block(void *data, bool blocked) { - if (state) - return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x101); - else - return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x100); -} + unsigned long b = (unsigned long) data; + int query = BIT(b + 8) | ((!!blocked) << b); -static int hp_wmi_bluetooth_set(void *data, enum rfkill_state state) -{ - if (state) - return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x202); - else - return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x200); + return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query); } -static int hp_wmi_wwan_set(void *data, enum rfkill_state state) -{ - if (state) - return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x404); - else - return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x400); -} +static const struct rfkill_ops hp_wmi_rfkill_ops = { + .set_block = hp_wmi_set_block, +}; -static int hp_wmi_wifi_state(void) +static bool hp_wmi_wifi_state(void) { int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0); if (wireless & 0x100) - return RFKILL_STATE_UNBLOCKED; + return false; else - return RFKILL_STATE_SOFT_BLOCKED; + return true; } -static int hp_wmi_bluetooth_state(void) +static bool hp_wmi_bluetooth_state(void) { int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0); if (wireless & 0x10000) - return RFKILL_STATE_UNBLOCKED; + return false; else - return RFKILL_STATE_SOFT_BLOCKED; + return true; } -static int hp_wmi_wwan_state(void) +static bool hp_wmi_wwan_state(void) { int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0); if (wireless & 0x1000000) - return RFKILL_STATE_UNBLOCKED; + return false; else - return RFKILL_STATE_SOFT_BLOCKED; + return true; } static ssize_t show_display(struct device *dev, struct device_attribute *attr, @@ -345,14 +333,14 @@ static void hp_wmi_notify(u32 value, voi } } else if (eventcode == 0x5) { if (wifi_rfkill) - rfkill_force_state(wifi_rfkill, - hp_wmi_wifi_state()); + rfkill_set_sw_state(wifi_rfkill, + hp_wmi_wifi_state()); if (bluetooth_rfkill) - rfkill_force_state(bluetooth_rfkill, - hp_wmi_bluetooth_state()); + rfkill_set_sw_state(bluetooth_rfkill, + hp_wmi_bluetooth_state()); if (wwan_rfkill) - rfkill_force_state(wwan_rfkill, - hp_wmi_wwan_state()); + rfkill_set_sw_state(wwan_rfkill, + hp_wmi_wwan_state()); } else printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n", eventcode); @@ -428,31 +416,34 @@ static int __init hp_wmi_bios_setup(stru goto add_sysfs_error; if (wireless & 0x1) { - wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN); - wifi_rfkill->name = "hp-wifi"; - wifi_rfkill->state = hp_wmi_wifi_state(); - wifi_rfkill->toggle_radio = hp_wmi_wifi_set; + wifi_rfkill = rfkill_alloc("hp-wifi", &device->dev, + RFKILL_TYPE_WLAN, + &hp_wmi_rfkill_ops, + (void *) 0); + rfkill_set_sw_state(wifi_rfkill, hp_wmi_wifi_state()); err = rfkill_register(wifi_rfkill); if (err) - goto add_sysfs_error; + goto register_wifi_error; } if (wireless & 0x2) { - bluetooth_rfkill = rfkill_allocate(&device->dev, - RFKILL_TYPE_BLUETOOTH); - bluetooth_rfkill->name = "hp-bluetooth"; - bluetooth_rfkill->state = hp_wmi_bluetooth_state(); - bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set; + bluetooth_rfkill = rfkill_alloc("hp-bluetooth", &device->dev, + RFKILL_TYPE_BLUETOOTH, + &hp_wmi_rfkill_ops, + (void *) 1); + rfkill_set_sw_state(bluetooth_rfkill, + hp_wmi_bluetooth_state()); err = rfkill_register(bluetooth_rfkill); if (err) goto register_bluetooth_error; } if (wireless & 0x4) { - wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WWAN); - wwan_rfkill->name = "hp-wwan"; - wwan_rfkill->state = hp_wmi_wwan_state(); - wwan_rfkill->toggle_radio = hp_wmi_wwan_set; + wwan_rfkill = rfkill_alloc("hp-wwan", &device->dev, + RFKILL_TYPE_WWAN, + &hp_wmi_rfkill_ops, + (void *) 2); + rfkill_set_sw_state(wwan_rfkill, hp_wmi_wwan_state()); err = rfkill_register(wwan_rfkill); if (err) goto register_wwan_err; @@ -460,11 +451,15 @@ static int __init hp_wmi_bios_setup(stru return 0; register_wwan_err: + rfkill_destroy(wwan_rfkill); if (bluetooth_rfkill) rfkill_unregister(bluetooth_rfkill); register_bluetooth_error: + rfkill_destroy(bluetooth_rfkill); if (wifi_rfkill) rfkill_unregister(wifi_rfkill); +register_wifi_error: + rfkill_destroy(wifi_rfkill); add_sysfs_error: cleanup_sysfs(device); return err; @@ -474,12 +469,18 @@ static int __exit hp_wmi_bios_remove(str { cleanup_sysfs(device); - if (wifi_rfkill) + if (wifi_rfkill) { rfkill_unregister(wifi_rfkill); - if (bluetooth_rfkill) + rfkill_destroy(wifi_rfkill); + } + if (bluetooth_rfkill) { rfkill_unregister(bluetooth_rfkill); - if (wwan_rfkill) + rfkill_destroy(wifi_rfkill); + } + if (wwan_rfkill) { rfkill_unregister(wwan_rfkill); + rfkill_destroy(wwan_rfkill); + } return 0; } --- wireless-testing.orig/drivers/platform/x86/toshiba_acpi.c 2009-03-30 11:33:53.000000000 +0200 +++ wireless-testing/drivers/platform/x86/toshiba_acpi.c 2009-03-30 23:36:43.000000000 +0200 @@ -311,28 +311,20 @@ static u32 hci_get_radio_state(bool *rad return hci_result; } -static int bt_rfkill_toggle_radio(void *data, enum rfkill_state state) +static int bt_rfkill_set_block(void *data, bool blocked) { u32 result1, result2; u32 value; bool radio_state; struct toshiba_acpi_dev *dev = data; - value = (state == RFKILL_STATE_UNBLOCKED); + value = (blocked == false); if (hci_get_radio_state(&radio_state) != HCI_SUCCESS) - return -EFAULT; + return -EBUSY; - switch (state) { - case RFKILL_STATE_UNBLOCKED: - if (!radio_state) - return -EPERM; - break; - case RFKILL_STATE_SOFT_BLOCKED: - break; - default: - return -EINVAL; - } + if (WARN_ON(!blocked && !radio_state)) + return; mutex_lock(&dev->mutex); hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER, &result1); @@ -340,8 +332,7 @@ static int bt_rfkill_toggle_radio(void * mutex_unlock(&dev->mutex); if (result1 != HCI_SUCCESS || result2 != HCI_SUCCESS) - return -EFAULT; - + return -EBUSY; return 0; } @@ -365,7 +356,7 @@ static void bt_poll_rfkill(struct input_ mutex_unlock(&dev->mutex); if (unlikely(state_changed)) { - rfkill_force_state(dev->rfk_dev, + rfkill_set_hw_state(dev->rfk_dev, new_rfk_state ? RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_HARD_BLOCKED); --- wireless-testing.orig/arch/arm/mach-pxa/tosa-bt.c 2009-03-30 11:33:52.000000000 +0200 +++ wireless-testing/arch/arm/mach-pxa/tosa-bt.c 2009-03-30 23:28:01.000000000 +0200 @@ -35,21 +35,25 @@ static void tosa_bt_off(struct tosa_bt_d gpio_set_value(data->gpio_reset, 0); } -static int tosa_bt_toggle_radio(void *data, enum rfkill_state state) +static int tosa_bt_set_block(void *data, bool blocked) { - pr_info("BT_RADIO going: %s\n", - state == RFKILL_STATE_UNBLOCKED ? "on" : "off"); + pr_info("BT_RADIO going: %s\n", blocked ? "off" : "on"); - if (state == RFKILL_STATE_UNBLOCKED) { + if (!blocked) { pr_info("TOSA_BT: going ON\n"); tosa_bt_on(data); } else { pr_info("TOSA_BT: going OFF\n"); tosa_bt_off(data); } + return 0; } +static const struct rfkill_ops tosa_bt_rfkill_ops = { + .set_block = tosa_bt_set_block, +}; + static int tosa_bt_probe(struct platform_device *dev) { int rc; @@ -70,19 +74,13 @@ static int tosa_bt_probe(struct platform if (rc) goto err_pwr_dir; - rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH); + rfk = rfkill_alloc("tosa-bt", &dev->dev, RFKILL_TYPE_BLUETOOTH, + &tosa_bt_rfkill_ops, data); if (!rfk) { rc = -ENOMEM; goto err_rfk_alloc; } - rfk->name = "tosa-bt"; - rfk->toggle_radio = tosa_bt_toggle_radio; - rfk->data = data; -#ifdef CONFIG_RFKILL_LEDS - rfk->led_trigger.name = "tosa-bt"; -#endif - rc = rfkill_register(rfk); if (rc) goto err_rfkill; @@ -92,9 +90,7 @@ static int tosa_bt_probe(struct platform return 0; err_rfkill: - if (rfk) - rfkill_free(rfk); - rfk = NULL; + rfkill_destroy(rfk); err_rfk_alloc: tosa_bt_off(data); err_pwr_dir: @@ -113,8 +109,10 @@ static int __devexit tosa_bt_remove(stru platform_set_drvdata(dev, NULL); - if (rfk) + if (rfk) { rfkill_unregister(rfk); + rfkill_destroy(rfk); + } rfk = NULL; tosa_bt_off(data); --- wireless-testing.orig/arch/arm/mach-pxa/tosa.c 2009-03-30 11:33:36.000000000 +0200 +++ wireless-testing/arch/arm/mach-pxa/tosa.c 2009-03-30 11:33:53.000000000 +0200 @@ -31,7 +31,6 @@ #include <linux/input.h> #include <linux/gpio.h> #include <linux/pda_power.h> -#include <linux/rfkill.h> #include <linux/spi/spi.h> #include <asm/setup.h> --- wireless-testing.orig/include/net/wimax.h 2009-03-30 23:05:02.000000000 +0200 +++ wireless-testing/include/net/wimax.h 2009-03-30 23:05:31.000000000 +0200 @@ -253,7 +253,6 @@ struct net_device; struct genl_info; struct wimax_dev; -struct input_dev; /** * struct wimax_dev - Generic WiMAX device @@ -293,8 +292,8 @@ struct input_dev; * See wimax_reset()'s documentation. * * @name: [fill] A way to identify this device. We need to register a - * name with many subsystems (input for RFKILL, workqueue - * creation, etc). We can't use the network device name as that + * name with many subsystems (rfkill, workqueue creation, etc). + * We can't use the network device name as that * might change and in some instances we don't know it yet (until * we don't call register_netdev()). So we generate an unique one * using the driver name and device bus id, place it here and use @@ -316,9 +315,6 @@ struct input_dev; * * @rfkill: [private] integration into the RF-Kill infrastructure. * - * @rfkill_input: [private] virtual input device to process the - * hardware RF Kill switches. - * * @rf_sw: [private] State of the software radio switch (OFF/ON) * * @rf_hw: [private] State of the hardware radio switch (OFF/ON) --- wireless-testing.orig/net/wimax/op-rfkill.c 2009-03-30 23:03:46.000000000 +0200 +++ wireless-testing/net/wimax/op-rfkill.c 2009-03-30 23:41:39.000000000 +0200 @@ -29,8 +29,8 @@ * A non-polled generic rfkill device is embedded into the WiMAX * subsystem's representation of a device. * - * FIXME: Need polled support? use a timer or add the implementation - * to the stack. + * FIXME: Need polled support? Let drivers provide a poll routine + * and hand it to rfkill ops then? * * All device drivers have to do is after wimax_dev_init(), call * wimax_report_rfkill_hw() and wimax_report_rfkill_sw() to update @@ -43,7 +43,7 @@ * wimax_rfkill() Kernel calling wimax_rfkill() * __wimax_rf_toggle_radio() * - * wimax_rfkill_toggle_radio() RF-Kill subsytem calling + * wimax_rfkill_set_radio_block() RF-Kill subsytem calling * __wimax_rf_toggle_radio() * * __wimax_rf_toggle_radio() @@ -65,7 +65,6 @@ #include <linux/wimax.h> #include <linux/security.h> #include <linux/rfkill.h> -#include <linux/input.h> #include "wimax-internal.h" #define D_SUBMODULE op_rfkill @@ -99,7 +98,6 @@ void wimax_report_rfkill_hw(struct wimax int result; struct device *dev = wimax_dev_to_dev(wimax_dev); enum wimax_st wimax_state; - enum rfkill_state rfkill_state; d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state); BUG_ON(state == WIMAX_RF_QUERY); @@ -112,16 +110,13 @@ void wimax_report_rfkill_hw(struct wimax if (state != wimax_dev->rf_hw) { wimax_dev->rf_hw = state; - rfkill_state = state == WIMAX_RF_ON ? - RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED; if (wimax_dev->rf_hw == WIMAX_RF_ON && wimax_dev->rf_sw == WIMAX_RF_ON) wimax_state = WIMAX_ST_READY; else wimax_state = WIMAX_ST_RADIO_OFF; + rfkill_set_hw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF); __wimax_state_change(wimax_dev, wimax_state); - input_report_key(wimax_dev->rfkill_input, KEY_WIMAX, - rfkill_state); } error_not_ready: mutex_unlock(&wimax_dev->mutex); @@ -174,6 +169,7 @@ void wimax_report_rfkill_sw(struct wimax else wimax_state = WIMAX_ST_RADIO_OFF; __wimax_state_change(wimax_dev, wimax_state); + rfkill_set_sw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF); } error_not_ready: mutex_unlock(&wimax_dev->mutex); @@ -249,36 +245,31 @@ out_no_change: * * NOTE: This call will block until the operation is completed. */ -static -int wimax_rfkill_toggle_radio(void *data, enum rfkill_state state) +static int wimax_rfkill_set_radio_block(void *data, bool blocked) { int result; struct wimax_dev *wimax_dev = data; struct device *dev = wimax_dev_to_dev(wimax_dev); enum wimax_rf_state rf_state; - d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state); - switch (state) { - case RFKILL_STATE_SOFT_BLOCKED: + d_fnstart(3, dev, "(wimax_dev %p blocked %u)\n", wimax_dev, blocked); + rf_state = WIMAX_RF_ON; + if (blocked) rf_state = WIMAX_RF_OFF; - break; - case RFKILL_STATE_UNBLOCKED: - rf_state = WIMAX_RF_ON; - break; - default: - BUG(); - } mutex_lock(&wimax_dev->mutex); if (wimax_dev->state <= __WIMAX_ST_QUIESCING) - result = 0; /* just pretend it didn't happen */ + result = 0; else result = __wimax_rf_toggle_radio(wimax_dev, rf_state); mutex_unlock(&wimax_dev->mutex); - d_fnend(3, dev, "(wimax_dev %p state %u) = %d\n", - wimax_dev, state, result); + d_fnend(3, dev, "(wimax_dev %p blocked %u) = %d\n", + wimax_dev, blocked, result); return result; } +static const struct rfkill_ops wimax_rfkill_ops = { + .set_block = wimax_rfkill_set_radio_block, +}; /** * wimax_rfkill - Set the software RF switch state for a WiMAX device @@ -322,6 +313,7 @@ int wimax_rfkill(struct wimax_dev *wimax result = __wimax_rf_toggle_radio(wimax_dev, state); if (result < 0) goto error; + rfkill_set_sw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF); break; case WIMAX_RF_QUERY: break; @@ -349,40 +341,19 @@ int wimax_rfkill_add(struct wimax_dev *w { int result; struct rfkill *rfkill; - struct input_dev *input_dev; struct device *dev = wimax_dev_to_dev(wimax_dev); d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev); /* Initialize RF Kill */ result = -ENOMEM; - rfkill = rfkill_allocate(dev, RFKILL_TYPE_WIMAX); + rfkill = rfkill_alloc(wimax_dev->name, dev, RFKILL_TYPE_WIMAX, + &wimax_rfkill_ops, wimax_dev); if (rfkill == NULL) goto error_rfkill_allocate; wimax_dev->rfkill = rfkill; - rfkill->name = wimax_dev->name; - rfkill->state = RFKILL_STATE_UNBLOCKED; - rfkill->data = wimax_dev; - rfkill->toggle_radio = wimax_rfkill_toggle_radio; - - /* Initialize the input device for the hw key */ - input_dev = input_allocate_device(); - if (input_dev == NULL) - goto error_input_allocate; - wimax_dev->rfkill_input = input_dev; - d_printf(1, dev, "rfkill %p input %p\n", rfkill, input_dev); - - input_dev->name = wimax_dev->name; - /* FIXME: get a real device bus ID and stuff? do we care? */ - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0xffff; - input_dev->evbit[0] = BIT(EV_KEY); - set_bit(KEY_WIMAX, input_dev->keybit); + d_printf(1, dev, "rfkill %p\n", rfkill); - /* Register both */ - result = input_register_device(wimax_dev->rfkill_input); - if (result < 0) - goto error_input_register; result = rfkill_register(wimax_dev->rfkill); if (result < 0) goto error_rfkill_register; @@ -394,17 +365,8 @@ int wimax_rfkill_add(struct wimax_dev *w d_fnend(3, dev, "(wimax_dev %p) = 0\n", wimax_dev); return 0; - /* if rfkill_register() suceeds, can't use rfkill_free() any - * more, only rfkill_unregister() [it owns the refcount]; with - * the input device we have the same issue--hence the if. */ error_rfkill_register: - input_unregister_device(wimax_dev->rfkill_input); - wimax_dev->rfkill_input = NULL; -error_input_register: - if (wimax_dev->rfkill_input) - input_free_device(wimax_dev->rfkill_input); -error_input_allocate: - rfkill_free(wimax_dev->rfkill); + rfkill_destroy(wimax_dev->rfkill); error_rfkill_allocate: d_fnend(3, dev, "(wimax_dev %p) = %d\n", wimax_dev, result); return result; @@ -423,8 +385,8 @@ void wimax_rfkill_rm(struct wimax_dev *w { struct device *dev = wimax_dev_to_dev(wimax_dev); d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev); - rfkill_unregister(wimax_dev->rfkill); /* frees */ - input_unregister_device(wimax_dev->rfkill_input); + rfkill_unregister(wimax_dev->rfkill); + rfkill_destroy(wimax_dev->rfkill); d_fnend(3, dev, "(wimax_dev %p)\n", wimax_dev); } -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html