On Wednesday 25 March 2009 14:42:58 Christian Lamparter wrote: > On Wednesday 25 March 2009 13:50:44 Max Filippov wrote: > > >> Sorry, I haven't been used to checkpatch. > > > But your PATCH 1/2 sailed through without any complains. ;-) > > Mere coincidence (: > > > > > BTW: does p54spi really work now? > > I haven't tested your patch yet, but with the one that I sent it does > > work in IBSS mode. > > My aim is to wind it up in mesh mode. This doesn't work, it cannot > > establish peer link. > > I'm going to investigate it. Does mesh mode work on conventional pci/usb p54? > > hmm, yes... at least with wireless-testing from yesterday. (beaconing works too) > > [ 9862.704138] mesh: running mesh housekeeping > [ 9906.580204] phy3: Allocated STA 00:14:a5:45:33:ff > [ 9906.581566] phy3: Inserted STA 00:14:a5:45:33:ff > [ 9906.581581] Mesh plink: starting establishment with 00:14:a5:45:33:ff > [ 9906.634055] Mesh plink (peer, state, llid, plid, event): 00:14:a5:45:33:ff 1 28312 0 1 > [ 9906.636888] Mesh plink (peer, state, llid, plid, event): 00:14:a5:45:33:ff 2 28312 55519 4 > [ 9906.636895] Mesh plink with 00:14:a5:45:33:ff ESTABLISHED > > 64 bytes from 10.0.0.2: icmp_seq=449 ttl=64 time=1.81 ms > 64 bytes from 10.0.0.2: icmp_seq=450 ttl=64 time=1.41 ms > 64 bytes from 10.0.0.2: icmp_seq=451 ttl=64 time=3.52 ms > ... > > both peers have a p54 (one is pci, the other one usb)... I'll see if I can > get my old ath5k back to verify that it works with other devices as well. FYI, I just finished testing with a 5 node mesh network with various drivers (ath5k, ar9170usb and p54 mesh network) and it looks like everything works the way it should... ( testing was done with the current wireless-testing.git ) Is there anything else I can do, or something you want to know? Regards, Chr -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
