On Wednesday 25 March 2009 13:50:44 Max Filippov wrote: > >> Sorry, I haven't been used to checkpatch. > > But your PATCH 1/2 sailed through without any complains. ;-) > Mere coincidence (: > > > BTW: does p54spi really work now? > I haven't tested your patch yet, but with the one that I sent it does > work in IBSS mode. > My aim is to wind it up in mesh mode. This doesn't work, it cannot > establish peer link. > I'm going to investigate it. Does mesh mode work on conventional pci/usb p54? hmm, yes... at least with wireless-testing from yesterday. (beaconing works too) [ 9862.704138] mesh: running mesh housekeeping [ 9906.580204] phy3: Allocated STA 00:14:a5:45:33:ff [ 9906.581566] phy3: Inserted STA 00:14:a5:45:33:ff [ 9906.581581] Mesh plink: starting establishment with 00:14:a5:45:33:ff [ 9906.634055] Mesh plink (peer, state, llid, plid, event): 00:14:a5:45:33:ff 1 28312 0 1 [ 9906.636888] Mesh plink (peer, state, llid, plid, event): 00:14:a5:45:33:ff 2 28312 55519 4 [ 9906.636895] Mesh plink with 00:14:a5:45:33:ff ESTABLISHED 64 bytes from 10.0.0.2: icmp_seq=449 ttl=64 time=1.81 ms 64 bytes from 10.0.0.2: icmp_seq=450 ttl=64 time=1.41 ms 64 bytes from 10.0.0.2: icmp_seq=451 ttl=64 time=3.52 ms ... both peers have a p54 (one is pci, the other one usb)... I'll see if I can get my old ath5k back to verify that it works with other devices as well. Regards, Chr -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
