On Fri, Feb 13, 2009 at 08:52:32PM -0800, Luis Rodriguez wrote:
> On Wed, Feb 11, 2009 at 11:19:41AM -0800, Tony Vroon wrote:
> > Clear run, haven't touched iw, still no 802.11A spectrum. dmesg
> > attached. Any suggestion for a workaround that will get me my networks
> > back please? (Besides enabling the old regulatory options, which is
> > scheduled to be taken away from me soon)
> >
> > Regards,
> > Tony V.
>
> > Linux version 2.6.29-rc4-00026-gf06da26 (root@amalthea) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0, pie-10.1.5) ) #1 SMP Mon Feb 9 18:55:10 GMT 2009
> > Command line: auto BOOT_IMAGE=2.6.29-rc4-0002 rw root=0 video=vesafb:ywrap,pmipal,mtrr
> > KERNEL supported cpus:
> > Intel GenuineIntel
> > AMD AuthenticAMD
> > Centaur CentaurHauls
> > BIOS-provided physical RAM map:
> > BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
> > BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
> > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> > BIOS-e820: 0000000000100000 - 00000000bce51000 (usable)
> > BIOS-e820: 00000000bce51000 - 00000000bce57000 (reserved)
> > BIOS-e820: 00000000bce57000 - 00000000bd058000 (usable)
> > BIOS-e820: 00000000bd058000 - 00000000bd0af000 (reserved)
> > BIOS-e820: 00000000bd0af000 - 00000000bd1a8000 (usable)
> > BIOS-e820: 00000000bd1a8000 - 00000000bd4af000 (reserved)
> > BIOS-e820: 00000000bd4af000 - 00000000bd4d8000 (usable)
> > BIOS-e820: 00000000bd4d8000 - 00000000bd4df000 (reserved)
> > BIOS-e820: 00000000bd4df000 - 00000000bd535000 (usable)
> > BIOS-e820: 00000000bd535000 - 00000000bd57f000 (ACPI NVS)
> > BIOS-e820: 00000000bd57f000 - 00000000bd5e4000 (usable)
> > BIOS-e820: 00000000bd5e4000 - 00000000bd5fd000 (ACPI data)
> > BIOS-e820: 00000000bd5fd000 - 00000000bd600000 (usable)
> > BIOS-e820: 00000000bd600000 - 00000000c0000000 (reserved)
> > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> > BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> > BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
> > BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
> > BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> > BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
> > DMI 2.4 present.
> > last_pfn = 0xbd600 max_arch_pfn = 0x100000000
> > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> > init_memory_mapping: 0000000000000000-00000000bd600000
> > 0000000000 - 00bd600000 page 2M
> > kernel direct mapping tables up to bd600000 @ 8000-c000
> > last_map_addr: bd600000 end: bd600000
> > ACPI: RSDP 000F53D0, 0024 (r2 FUJ )
> > ACPI: XSDT BD5F3434, 0074 (r1 FSC PC 1160000 FUJ 100)
> > ACPI: FACP BD5E6000, 00F4 (r3 FSC PC 1160000 FUJ 100)
> > FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
> > ACPI: DSDT BD5E7000, 8CFF (r1 FUJ FJNB1E6 1160000 FUJ 100)
> > ACPI: FACS BD56EFC0, 0040
> > ACPI: SSDT BD5FC1DF, 034F (r1 FUJ FJNB1E6 1160000 FUJ 100)
> > ACPI: HPET BD5FC622, 0038 (r1 FUJ FJNB1E6 1160000 FUJ 100)
> > ACPI: MCFG BD5FC65A, 003C (r1 FUJ FJNB1E6 1160000 FUJ 100)
> > ACPI: SSDT BD5FC696, 042F (r1 FUJ FJNB1E6 1160000 FUJ 100)
> > ACPI: SSDT BD5FCAC5, 02C1 (r1 FUJ FJNB1E6 1160000 FUJ 100)
> > ACPI: APIC BD5FCD86, 0068 (r1 FUJ FJNB1E6 1160000 FUJ 100)
> > ACPI: BOOT BD5FCDEE, 0028 (r1 FUJ FJNB1E6 1160000 FUJ 100)
> > ACPI: SLIC BD5FCE16, 0176 (r1 FSC PC 1160000 FUJ 100)
> > ACPI: SSDT BD5E5000, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
> > ACPI: Local APIC address 0xfee00000
> > (5 early reservations) ==> bootmem [0000000000 - 00bd600000]
> > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> > #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> > #2 [0000200000 - 00009f3dec] TEXT DATA BSS ==> [0000200000 - 00009f3dec]
> > #3 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000]
> > #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
> > [ffffe20000000000-ffffe200029fffff] PMD -> [ffff880001200000-ffff880003bfffff] on node 0
> > Zone PFN ranges:
> > DMA 0x00000000 -> 0x00001000
> > DMA32 0x00001000 -> 0x00100000
> > Normal 0x00100000 -> 0x00100000
> > Movable zone start PFN for each node
> > early_node_map[8] active PFN ranges
> > 0: 0x00000000 -> 0x0000009d
> > 0: 0x00000100 -> 0x000bce51
> > 0: 0x000bce57 -> 0x000bd058
> > 0: 0x000bd0af -> 0x000bd1a8
> > 0: 0x000bd4af -> 0x000bd4d8
> > 0: 0x000bd4df -> 0x000bd535
> > 0: 0x000bd57f -> 0x000bd5e4
> > 0: 0x000bd5fd -> 0x000bd600
> > On node 0 totalpages: 774607
> > DMA zone: 56 pages used for memmap
> > DMA zone: 2138 pages reserved
> > DMA zone: 1803 pages, LIFO batch:0
> > DMA32 zone: 10549 pages used for memmap
> > DMA32 zone: 760061 pages, LIFO batch:31
> > ACPI: PM-Timer IO Port: 0x408
> > ACPI: Local APIC address 0xfee00000
> > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> > IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
> > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> > ACPI: IRQ0 used by override.
> > ACPI: IRQ2 used by override.
> > ACPI: IRQ9 used by override.
> > Using ACPI (MADT) for SMP configuration information
> > ACPI: HPET id: 0x8086a201 base: 0xfed00000
> > SMP: Allowing 2 CPUs, 0 hotplug CPUs
> > Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
> > NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
> > PERCPU: Allocating 49152 bytes of per cpu data
> > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 761864
> > Kernel command line: auto BOOT_IMAGE=2.6.29-rc4-0002 rw root=0 video=vesafb:ywrap,pmipal,mtrr
> > Initializing CPU#0
> > PID hash table entries: 4096 (order: 12, 32768 bytes)
> > Extended CMOS year: 2000
> > Fast TSC calibration using PIT
> > Detected 2526.896 MHz processor.
> > Console: colour VGA+ 80x25
> > console [tty0] enabled
> > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> > Checking aperture...
> > No AGP bridge found
> > Memory: 3040120k/3102720k available (4161k kernel code, 4292k absent, 57580k reserved, 1977k data, 1428k init)
> > SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
> > hpet clockevent registered
> > HPET: 4 timers in total, 0 timers will be used for per-cpu timer
> > Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.36 BogoMIPS (lpj=8422986)
> > Mount-cache hash table entries: 256
> > CPU: L1 I cache: 32K, L1 D cache: 32K
> > CPU: L2 cache: 6144K
> > [ds] using Core 2/Atom configuration
> > CPU: Physical Processor ID: 0
> > CPU: Processor Core ID: 0
> > CPU0: Thermal monitoring enabled (TM2)
> > using mwait in idle threads.
> > Freeing SMP alternatives: 37k freed
> > ACPI: Core revision 20081204
> > Setting APIC routing to flat
> > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> > CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
> > Booting processor 1 APIC 0x1 ip 0x6000
> > Initializing CPU#1
> > Calibrating delay using timer specific routine.. 5056.56 BogoMIPS (lpj=8423304)
> > CPU: L1 I cache: 32K, L1 D cache: 32K
> > CPU: L2 cache: 6144K
> > [ds] using Core 2/Atom configuration
> > CPU: Physical Processor ID: 0
> > CPU: Processor Core ID: 1
> > CPU1: Thermal monitoring enabled (TM2)
> > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> > CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
> > checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> > Brought up 2 CPUs
> > Total of 2 processors activated (10111.93 BogoMIPS).
> > net_namespace: 960 bytes
> > NET: Registered protocol family 16
> > ACPI: bus type pci registered
> > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> > PCI: MCFG area at e0000000 reserved in E820
> > PCI: Using MMCONFIG at e0000000 - efffffff
> > PCI: Using configuration type 1 for base access
> > mtrr: your CPUs had inconsistent variable MTRR settings
> > mtrr: probably your BIOS does not setup all CPUs.
> > mtrr: corrected configuration.
> > bio: create slab <bio-0> at 0
> > ACPI: EC: Look up EC in DSDT
> > ACPI: SSDT BD56E965, 03F1 (r1 FUJ FJNB1E6 1160000 FUJ 100)
> > ACPI: Interpreter enabled
> > ACPI: (supports S0 S5)
> > ACPI: Using IOAPIC for interrupt routing
> > ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
> > ACPI: EC: driver started in poll mode
> > ACPI: ACPI Dock Station Driver: 2 docks/bays found
> > ACPI: PCI Root Bridge [PCI0] (0000:00)
> > pci 0000:00:02.0: reg 10 64bit mmio: [0xf0000000-0xf03fffff]
> > pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
> > pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
> > pci 0000:00:02.1: reg 10 64bit mmio: [0xf0400000-0xf04fffff]
> > pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
> > pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
> > pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
> > pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0a04800-0xf0a04bff]
> > pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> > pci 0000:00:1a.7: PME# disabled
> > pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0a00000-0xf0a03fff]
> > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> > pci 0000:00:1b.0: PME# disabled
> > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> > pci 0000:00:1c.0: PME# disabled
> > pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> > pci 0000:00:1c.2: PME# disabled
> > pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
> > pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
> > pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
> > pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0a04c00-0xf0a04fff]
> > pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> > pci 0000:00:1d.7: PME# disabled
> > pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f]
> > pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f]
> > pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817]
> > pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b]
> > pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
> > pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0a04000-0xf0a047ff]
> > pci 0000:00:1f.2: PME# supported from D3hot
> > pci 0000:00:1f.2: PME# disabled
> > pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
> > pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
> > pci 0000:08:00.0: reg 10 64bit mmio: [0xf0500000-0xf0503fff]
> > pci 0000:08:00.0: reg 18 io port: [0x2000-0x20ff]
> > pci 0000:08:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
> > pci 0000:08:00.0: supports D1 D2
> > pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> > pci 0000:08:00.0: PME# disabled
> > pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
> > pci 0000:00:1c.0: bridge 32bit mmio: [0xf0500000-0xf05fffff]
> > pci 0000:18:00.0: reg 10 64bit mmio: [0xf0600000-0xf0601fff]
> > pci 0000:18:00.0: PME# supported from D0 D3hot D3cold
> > pci 0000:18:00.0: PME# disabled
> > pci 0000:00:1c.2: bridge 32bit mmio: [0xf0600000-0xf06fffff]
> > pci 0000:38:03.0: reg 10 32bit mmio: [0x000000-0x000fff]
> > pci 0000:38:03.0: supports D1 D2
> > pci 0000:38:03.0: PME# supported from D0 D1 D2 D3hot D3cold
> > pci 0000:38:03.0: PME# disabled
> > pci 0000:38:03.2: reg 10 32bit mmio: [0xf0700000-0xf07000ff]
> > pci 0000:38:03.2: supports D1 D2
> > pci 0000:38:03.2: PME# supported from D0 D1 D2 D3hot D3cold
> > pci 0000:38:03.2: PME# disabled
> > pci 0000:38:03.3: reg 10 32bit mmio: [0xf0701000-0xf0701fff]
> > pci 0000:38:03.3: supports D1 D2
> > pci 0000:38:03.3: PME# supported from D0 D1 D2 D3hot D3cold
> > pci 0000:38:03.3: PME# disabled
> > pci 0000:38:03.4: reg 10 32bit mmio: [0xf0702000-0xf0702fff]
> > pci 0000:38:03.4: reg 14 32bit mmio: [0xf0700800-0xf0700fff]
> > pci 0000:38:03.4: supports D1 D2
> > pci 0000:38:03.4: PME# supported from D0 D1 D2 D3hot
> > pci 0000:38:03.4: PME# disabled
> > pci 0000:00:1e.0: transparent bridge
> > pci 0000:00:1e.0: bridge 32bit mmio: [0xf0700000-0xf07fffff]
> > pci_bus 0000:00: on NUMA node 0
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> > ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> > ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> > ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> > ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> > ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
> > ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> > ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> > ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> > SCSI subsystem initialized
> > libata version 3.00 loaded.
> > usbcore: registered new interface driver usbfs
> > usbcore: registered new interface driver hub
> > usbcore: registered new device driver usb
> > PCI: Using ACPI for IRQ routing
> > Bluetooth: Core ver 2.14
> > NET: Registered protocol family 31
> > Bluetooth: HCI device and connection manager initialized
> > Bluetooth: HCI socket layer initialized
> > cfg80211: Calling CRDA to update world regulatory domain
> > cfg80211: calling CRDA failed - unable to update world regulatory domain, using static definition
>
> OK please use the new patch series I am about to post to test why this is
> happening. And I am perplexed as to why you have 5 GHz disabled because
> wiphy->custom_regulatory is enabled for intel the iwlagn driver and upon
> wiphy registration we have a check to see if this is set and if the last
> regulatory hint came from the core, if this is true we don't update the
> wiphy's channels based on the regulatory domain:
>
> if (!last_request)
> return true;
> if (setby == REGDOM_SET_BY_CORE &&
> wiphy->custom_regulatory)
> return true
>
> Please run with my latest patch series or wait until it gets merged,
> we'll be able to do a trace of your udev even failing to call CRDA
> and the core initialization will be much easier to read.
Actually, upon further investigation it may just be that the iwlagn driver
is simply respecting your EEPROM settings. Enable IWL_DEBUG_INFO and recompile
and spit the log out here.
Luis
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
