Full dmesg of the faulty run with debugging attached for your reference. Indeed, as John said this patch made it into mainline and is already applied to my sources: chainsaw@amalthea /cvs/linux-2.6 $ patch --dry-run -p1 -i ~/\[PATCH_5_6 \]_cfg80211\:_Fix_regression_with_11d_on_bands.diff patching file net/wireless/reg.c Reversed (or previously applied) patch detected! Assume -R? [n] ^C Regards, Tony V.
Linux version 2.6.29-rc4-00026-gf06da26 (root@amalthea) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0, pie-10.1.5) ) #1 SMP Mon Feb 9 18:55:10 GMT 2009
Command line: auto BOOT_IMAGE=2.6.29-rc4-0002 rw root=0 video=vesafb:ywrap,pmipal,mtrr
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bce51000 (usable)
BIOS-e820: 00000000bce51000 - 00000000bce57000 (reserved)
BIOS-e820: 00000000bce57000 - 00000000bd058000 (usable)
BIOS-e820: 00000000bd058000 - 00000000bd0af000 (reserved)
BIOS-e820: 00000000bd0af000 - 00000000bd1a8000 (usable)
BIOS-e820: 00000000bd1a8000 - 00000000bd4af000 (reserved)
BIOS-e820: 00000000bd4af000 - 00000000bd4d8000 (usable)
BIOS-e820: 00000000bd4d8000 - 00000000bd4df000 (reserved)
BIOS-e820: 00000000bd4df000 - 00000000bd535000 (usable)
BIOS-e820: 00000000bd535000 - 00000000bd57f000 (ACPI NVS)
BIOS-e820: 00000000bd57f000 - 00000000bd5e4000 (usable)
BIOS-e820: 00000000bd5e4000 - 00000000bd5fd000 (ACPI data)
BIOS-e820: 00000000bd5fd000 - 00000000bd600000 (usable)
BIOS-e820: 00000000bd600000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0xbd600 max_arch_pfn = 0x100000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-00000000bd600000
0000000000 - 00bd600000 page 2M
kernel direct mapping tables up to bd600000 @ 8000-c000
last_map_addr: bd600000 end: bd600000
ACPI: RSDP 000F53D0, 0024 (r2 FUJ )
ACPI: XSDT BD5F3434, 0074 (r1 FSC PC 1160000 FUJ 100)
ACPI: FACP BD5E6000, 00F4 (r3 FSC PC 1160000 FUJ 100)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT BD5E7000, 8CFF (r1 FUJ FJNB1E6 1160000 FUJ 100)
ACPI: FACS BD56EFC0, 0040
ACPI: SSDT BD5FC1DF, 034F (r1 FUJ FJNB1E6 1160000 FUJ 100)
ACPI: HPET BD5FC622, 0038 (r1 FUJ FJNB1E6 1160000 FUJ 100)
ACPI: MCFG BD5FC65A, 003C (r1 FUJ FJNB1E6 1160000 FUJ 100)
ACPI: SSDT BD5FC696, 042F (r1 FUJ FJNB1E6 1160000 FUJ 100)
ACPI: SSDT BD5FCAC5, 02C1 (r1 FUJ FJNB1E6 1160000 FUJ 100)
ACPI: APIC BD5FCD86, 0068 (r1 FUJ FJNB1E6 1160000 FUJ 100)
ACPI: BOOT BD5FCDEE, 0028 (r1 FUJ FJNB1E6 1160000 FUJ 100)
ACPI: SLIC BD5FCE16, 0176 (r1 FSC PC 1160000 FUJ 100)
ACPI: SSDT BD5E5000, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
(5 early reservations) ==> bootmem [0000000000 - 00bd600000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 00009f3dec] TEXT DATA BSS ==> [0000200000 - 00009f3dec]
#3 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000]
#4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ffffe20000000000-ffffe200029fffff] PMD -> [ffff880001200000-ffff880003bfffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[8] active PFN ranges
0: 0x00000000 -> 0x0000009d
0: 0x00000100 -> 0x000bce51
0: 0x000bce57 -> 0x000bd058
0: 0x000bd0af -> 0x000bd1a8
0: 0x000bd4af -> 0x000bd4d8
0: 0x000bd4df -> 0x000bd535
0: 0x000bd57f -> 0x000bd5e4
0: 0x000bd5fd -> 0x000bd600
On node 0 totalpages: 774607
DMA zone: 56 pages used for memmap
DMA zone: 2138 pages reserved
DMA zone: 1803 pages, LIFO batch:0
DMA32 zone: 10549 pages used for memmap
DMA32 zone: 760061 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Allocating 49152 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 761864
Kernel command line: auto BOOT_IMAGE=2.6.29-rc4-0002 rw root=0 video=vesafb:ywrap,pmipal,mtrr
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2527.066 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Memory: 3040120k/3102720k available (4161k kernel code, 4292k absent, 57580k reserved, 1977k data, 1428k init)
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.72 BogoMIPS (lpj=8423553)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
[ds] using Core 2/Atom configuration
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Freeing SMP alternatives: 37k freed
ACPI: Core revision 20081204
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5055.55 BogoMIPS (lpj=8423288)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
[ds] using Core 2/Atom configuration
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (10112.27 BogoMIPS).
net_namespace: 960 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT BD56E965, 03F1 (r1 FUJ FJNB1E6 1160000 FUJ 100)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: ACPI Dock Station Driver: 2 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xf0000000-0xf03fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
pci 0000:00:02.1: reg 10 64bit mmio: [0xf0400000-0xf04fffff]
pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0a04800-0xf0a04bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0a00000-0xf0a03fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0a04c00-0xf0a04fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f]
pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f]
pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817]
pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b]
pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0a04000-0xf0a047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:08:00.0: reg 10 64bit mmio: [0xf0500000-0xf0503fff]
pci 0000:08:00.0: reg 18 io port: [0x2000-0x20ff]
pci 0000:08:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xf0500000-0xf05fffff]
pci 0000:18:00.0: reg 10 64bit mmio: [0xf0600000-0xf0601fff]
pci 0000:18:00.0: PME# supported from D0 D3hot D3cold
pci 0000:18:00.0: PME# disabled
pci 0000:00:1c.2: bridge 32bit mmio: [0xf0600000-0xf06fffff]
pci 0000:38:03.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:38:03.0: supports D1 D2
pci 0000:38:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:38:03.0: PME# disabled
pci 0000:38:03.2: reg 10 32bit mmio: [0xf0700000-0xf07000ff]
pci 0000:38:03.2: supports D1 D2
pci 0000:38:03.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:38:03.2: PME# disabled
pci 0000:38:03.3: reg 10 32bit mmio: [0xf0701000-0xf0701fff]
pci 0000:38:03.3: supports D1 D2
pci 0000:38:03.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:38:03.3: PME# disabled
pci 0000:38:03.4: reg 10 32bit mmio: [0xf0702000-0xf0702fff]
pci 0000:38:03.4: reg 14 32bit mmio: [0xf0700800-0xf0700fff]
pci 0000:38:03.4: supports D1 D2
pci 0000:38:03.4: PME# supported from D0 D1 D2 D3hot
pci 0000:38:03.4: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf0700000-0xf07fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
Bluetooth: Core ver 2.14
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: calling CRDA failed - unable to update world regulatory domain, using static definition
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x400-0x47f has been reserved
system 00:01: ioport range 0x480-0x48f has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x680-0x69f has been reserved
system 00:01: ioport range 0x800-0x80f has been reserved
system 00:01: ioport range 0xf40-0xf41 has been reserved
system 00:01: ioport range 0x1100-0x111f has been reserved
system 00:01: ioport range 0x1180-0x11ff has been reserved
system 00:01: ioport range 0x1640-0x164f has been reserved
system 00:01: ioport range 0xf800-0xf87f has been reserved
system 00:01: ioport range 0xf880-0xf8ff has been reserved
system 00:01: ioport range 0xfc00-0xfc7f has been reserved
system 00:01: ioport range 0xfc80-0xfcff has been reserved
system 00:01: ioport range 0xfd00-0xfd7f has been reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
system 00:02: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:02: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:02: iomem range 0xfef00000-0xfeffffff has been reserved
system 00:0a: iomem range 0xfed00000-0xfed003ff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.0: IO window: 0x2000-0x2fff
pci 0000:00:1c.0: MEM window: 0xf0500000-0xf05fffff
pci 0000:00:1c.0: PREFETCH window: 0x000000c2000000-0x000000c20fffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:18
pci 0000:00:1c.2: IO window: disabled
pci 0000:00:1c.2: MEM window: 0xf0600000-0xf06fffff
pci 0000:00:1c.2: PREFETCH window: disabled
pci 0000:38:03.0: CardBus bridge, secondary bus 0000:39
pci 0000:38:03.0: IO window: 0x003000-0x0030ff
pci 0000:38:03.0: IO window: 0x003400-0x0034ff
pci 0000:38:03.0: PREFETCH window: 0xc4000000-0xc7ffffff
pci 0000:38:03.0: MEM window: 0xc8000000-0xcbffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:38
pci 0000:00:1e.0: IO window: 0x3000-0x3fff
pci 0000:00:1e.0: MEM window: 0xf0700000-0xf07fffff
pci 0000:00:1e.0: PREFETCH window: 0x000000c4000000-0x000000c7ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:38:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:08: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:08: resource 1 mem: [0xf0500000-0xf05fffff]
pci_bus 0000:08: resource 2 mem: [0xc2000000-0xc20fffff]
pci_bus 0000:08: resource 3 mem: [0x0-0x0]
pci_bus 0000:18: resource 0 mem: [0x0-0x0]
pci_bus 0000:18: resource 1 mem: [0xf0600000-0xf06fffff]
pci_bus 0000:18: resource 2 mem: [0x0-0x0]
pci_bus 0000:18: resource 3 mem: [0x0-0x0]
pci_bus 0000:38: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:38: resource 1 mem: [0xf0700000-0xf07fffff]
pci_bus 0000:38: resource 2 mem: [0xc4000000-0xc7ffffff]
pci_bus 0000:38: resource 3 io: [0x00-0xffff]
pci_bus 0000:38: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:39: resource 0 io: [0x3000-0x30ff]
pci_bus 0000:39: resource 1 io: [0x3400-0x34ff]
pci_bus 0000:39: resource 2 mem: [0xc4000000-0xc7ffffff]
pci_bus 0000:39: resource 3 mem: [0xc8000000-0xcbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0x7b set to 0x1
Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
NTFS driver 2.1.29 [Flags: R/O].
fuse init (API version 7.11)
msgmni has been set to 5939
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X
ACPI: AC Adapter [AC] (on-line)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Battery Slot [CMB1] (battery present)
ACPI: Battery Slot [CMB2] (battery absent)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button (CM) [SLPB]
acpi device:05: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/input/input4
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
ACPI: Invalid PBLK length [8]
ACPI: SSDT BD4DAC20, 0265 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT BD4D86A0, 05CC (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI_CPU:00: registered as cooling_device1
ACPI: Invalid PBLK length [8]
ACPI: SSDT BD4D9DA0, 00FD (r1 PmRef ApIst 3000 INTL 20050624)
ACPI: SSDT BD4DCF20, 0047 (r1 PmRef ApCst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2])
processor ACPI_CPU:01: registered as cooling_device2
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (27 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (27 C)
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
tpm_tis 00:03: Operation Timed out
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.0: irq 26 for MSI/MSI-X
[drm] Initialized i915 1.6.0 20080730 on minor 0
intelfb: intelfb_init
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
intelfb: Version 0.9.6
intelfb: intelfb_setup
intelfb: no options
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
loop: module loaded
sky2 driver version 1.22
sky2 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:08:00.0: setting latency timer to 64
sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:08:00.0: Marvell Yukon 88E8055 Gigabit Ethernet Controller
Part Number: 88E8055
Engineering Level: Rev. 1.4
Manufacturer: Marvell
sky2 0000:08:00.0: irq 27 for MSI/MSI-X
sky2 eth0: addr 00:17:42:c8:5a:90
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds
iwlagn: Copyright(c) 2003-2008 Intel Corporation
iwlagn 0000:18:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:18:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:18:00.0: PCI INT A disabled
wmaster0 (iwlagn): not using net_device_ops yet
phy0: Selected rate control algorithm 'iwl-agn-rs'
wlan0 (iwlagn): not using net_device_ops yet
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf0a04000 port 0xf0a04100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xf0a04000 port 0xf0a04180 irq 28
ata3: DUMMY
ata4: DUMMY
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40C, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 FB4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd ef/90:03:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ATAPI: MATSHITADVD-RAM UJ862BJ, 1.00, max UDMA/33
ata2.00: ACPI cmd ef/90:03:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862BJ 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
firewire_ohci 0000:38:03.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
firewire_ohci: Added fw-ohci device 0000:38:03.4, OHCI version 1.10
yenta_cardbus 0000:38:03.0: CardBus bridge found [10cf:143d]
yenta_cardbus 0000:38:03.0: O2: res at 0x94/0xD4: 00/ea
yenta_cardbus 0000:38:03.0: O2: enabling read prefetch/write burst
yenta_cardbus 0000:38:03.0: ISA IRQ mask 0x0cb8, PCI irq 17
yenta_cardbus 0000:38:03.0: Socket status: 30000006
pci_bus 0000:38: Raising subordinate bus# of parent bus (#38) from #39 to #3c
yenta_cardbus 0000:38:03.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
yenta_cardbus 0000:38:03.0: pcmcia: parent PCI bridge Memory window: 0xf0700000 - 0xf07fffff
yenta_cardbus 0000:38:03.0: pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xc7ffffff
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0a04800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0a04c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001840
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.3.2:USB Driver for Sierra Wireless USB modems
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input5
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
Bluetooth: Generic Bluetooth USB driver ver 0.4
usbcore: registered new interface driver btusb
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:38:03.2: SDHCI controller found [1217:7120] (rev 2)
sdhci-pci 0000:38:03.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
mmc0: Unknown controller version (2). You may experience problems.
Marking TSC unstable due to TSC halts in idle
Registered led device: mmc0
mmc0: SDHCI controller on PCI [0000:38:03.2] using DMA
firewire_core: created device fw0: GUID 00000e1003fdee54, S400
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18a.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 2-4: new high speed USB device using ehci_hcd and address 4
usb 2-4: configuration #1 chosen from 1 choice
uvcvideo: Found UVC 1.00 device OEM Camera (046d:09b2)
input: OEM Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa42000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
ALSA sound/pci/hda/hda_intel.c:633: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x020c0000
hda-codec: No codec parser is available
ALSA device list:
#0: HDA Intel at 0xf0a00000 irq 22
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.10
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 1428k freed
Write protecting the kernel read-only data: 5580k
usb 6-1: new full speed USB device using uhci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
usb 6-2: new full speed USB device using uhci_hcd and address 3
usb 6-2: configuration #1 chosen from 1 choice
usb 1-5.1: new full speed USB device using ehci_hcd and address 3
usb 1-5.1: configuration #1 chosen from 1 choice
hub 1-5.1:1.0: USB hub found
hub 1-5.1:1.0: 3 ports detected
usb 1-5.2: new low speed USB device using ehci_hcd and address 4
usb 1-5.2: configuration #1 chosen from 1 choice
generic-usb 0003:0A81:0701.0001: claimed by neither input, hiddev nor hidraw
usb 1-5.4: new full speed USB device using ehci_hcd and address 5
usb 1-5.4: configuration #1 chosen from 1 choice
usb 1-5.1.1: new full speed USB device using ehci_hcd and address 6
usb 1-5.1.1: configuration #1 chosen from 1 choice
hub 1-5.1.1:1.0: USB hub found
hub 1-5.1.1:1.0: 4 ports detected
usb 1-5.1.2: new low speed USB device using ehci_hcd and address 7
usb 1-5.1.2: configuration #1 chosen from 1 choice
input: Belkin Corporation Flip KVM as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1.2/1-5.1.2:1.0/input/input9
belkin 0003:050D:3201.0002: input: USB HID v1.10 Device [Belkin Corporation Flip KVM] on usb-0000:00:1a.7-5.1.2/input0
usb 1-5.1.3: new full speed USB device using ehci_hcd and address 8
hub 1-5.1:1.0: unable to enumerate USB device on port 3
usb 1-5.1.1.1: new low speed USB device using ehci_hcd and address 9
usb 1-5.1.1.1: configuration #1 chosen from 1 choice
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1.1/1-5.1.1.1:1.0/input/input10
generic-usb 0003:046D:C226.0003: input: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1a.7-5.1.1.1/input0
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1.1/1-5.1.1.1:1.1/input/input11
generic-usb 0003:046D:C226.0004: input: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:1a.7-5.1.1.1/input1
usb 1-5.1.1.4: new full speed USB device using ehci_hcd and address 10
usb 1-5.1.1.4: configuration #1 chosen from 1 choice
input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1.4/1-5.1.1.4:1.0/input/input12
generic-usb 0003:046D:C227.0005: input: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1a.7-5.1.1.4/input0
usb 1-6: new high speed USB device using ehci_hcd and address 11
usb 1-6: configuration #1 chosen from 1 choice
sierra 1-6:1.0: Sierra USB modem converter detected
usb 1-6: Sierra USB modem converter now attached to ttyUSB0
sierra 1-6:1.1: Sierra USB modem converter detected
usb 1-6: Sierra USB modem converter now attached to ttyUSB1
sierra 1-6:1.2: Sierra USB modem converter detected
usb 1-6: Sierra USB modem converter now attached to ttyUSB2
sierra 1-6:1.3: Sierra USB modem converter detected
usb 1-6: Sierra USB modem converter now attached to ttyUSB3
sierra 1-6:1.4: Sierra USB modem converter detected
usb 1-6: Sierra USB modem converter now attached to ttyUSB4
sierra 1-6:1.5: Sierra USB modem converter detected
usb 1-6: Sierra USB modem converter now attached to ttyUSB5
sierra 1-6:1.6: Sierra USB modem converter detected
usb 1-6: Sierra USB modem converter now attached to ttyUSB6
usb 1-5.1.3: new full speed USB device using ehci_hcd and address 12
usb 1-5.1.3: configuration #1 chosen from 1 choice
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1.3/1-5.1.3:1.0/input/input13
generic-usb 0003:1532:0101.0006: input: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1a.7-5.1.3/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1.3/1-5.1.3:1.1/input/input14
generic-usb 0003:1532:0101.0007: input: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1a.7-5.1.3/input1
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
fujitsu-laptop: Identified laptop model 'Fujitsu Siemens S6420'.
input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3f/FUJ02B1:00/input/input15
ACPI: Fujitsu FUJ02B1 [FJEX] (on)
input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input16
ACPI: Fujitsu FUJ02E3 [FEXT] (on)
fujitsu-laptop: BTNI: [0xff0101]
fujitsu-laptop: driver 0.5.0 successfully loaded.
gspca: main v2.4.0 registered
gspca: probing 0ac8:307b
zc3xx: probe 2wr ov vga 0x0000
zc3xx: probe 3wr vga 1 0x4001
zc3xx: probe 3wr vga 2 0x0000
zc3xx: Sensor UNKNOW_0 force Tas5130
gspca: probe ok
usbcore: registered new interface driver zc3xx
zc3xx: registered
EXT3 FS on dm-0, internal journal
input: G15 Extra Keys as /devices/virtual/input/input17
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlagn 0000:18:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:18:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
iwlagn 0000:18:00.0: irq 29 for MSI/MSI-X
iwlagn 0000:18:00.0: firmware: requesting iwlwifi-5000-1.ucode
iwlagn loaded firmware version 5.4.1.16
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
wlan0: direct probe to AP 00:1e:f7:ea:d1:60 try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1e:f7:ea:d1:60
wlan0: authenticated
wlan0: associate with AP 00:1e:f7:ea:d1:60
wlan0: RX AssocResp from 00:1e:f7:ea:d1:60 (capab=0x431 status=0 aid=3)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: GB
cfg80211: Received country IE:
cfg80211: Regulatory domain: GB
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2494000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm)
cfg80211: CRDA thinks this should applied:
cfg80211: Regulatory domain: GB
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
cfg80211: We intersect both of these and get:
cfg80211: Regulatory domain: 98
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5745 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5765 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5785 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5805 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5825 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Current regulatory domain updated by AP to: GB
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
wlan0: no IPv6 routers present
cfg80211: Calling CRDA for country: GB
cfg80211: Current regulatory intersected:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: Calling CRDA for country: GB
cfg80211: Received country IE:
cfg80211: Regulatory domain: GB
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2494000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm)
cfg80211: CRDA thinks this should applied:
cfg80211: Regulatory domain: GB
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
cfg80211: We intersect both of these and get:
cfg80211: Regulatory domain: 98
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5745 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5765 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5785 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5805 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Leaving channel 5825 MHz intact on phy0 - no rule found in band on Country IE
cfg80211: Current regulatory domain updated by AP to: GB
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Attachment:
signature.asc
Description: This is a digitally signed message part
