I'm using: [ebuild R ] net-wireless/wireless-regdb-20090130 0 kB [ebuild R ] net-wireless/crda-1.0.1-r1 0 kB [ebuild R ] net-wireless/iwl5000-ucode-5.4.0.11 0 kB The regulatory information for Great Britain looks as follows: country GB: (2402.000 - 2482.000 @ 40.000), (N/A, 20.00) (5170.000 - 5250.000 @ 40.000), (N/A, 20.00) (5250.000 - 5330.000 @ 40.000), (N/A, 20.00), DFS (5490.000 - 5710.000 @ 40.000), (N/A, 27.00), DFS iw reports the card configuration like such: Wiphy phy0 Band 1: HT capabilities: 0x087e * 20/40 MHz operation * SM PS disabled * HT-greenfield * 20 MHz short GI * 40 MHz short GI * max A-MSDU len 7935 HT A-MPDU factor: 0x0003 (65535 bytes) HT A-MPDU density: 0x0005 (4 usec) HT MCS set: ff ff ff 00 01 00 00 00 00 00 c2 01 01 00 00 00 Frequencies: * 2412 MHz [1] (15.0 dBm) * 2417 MHz [2] (15.0 dBm) * 2422 MHz [3] (15.0 dBm) * 2427 MHz [4] (15.0 dBm) * 2432 MHz [5] (15.0 dBm) * 2437 MHz [6] (15.0 dBm) * 2442 MHz [7] (15.0 dBm) * 2447 MHz [8] (15.0 dBm) * 2452 MHz [9] (15.0 dBm) * 2457 MHz [10] (15.0 dBm) * 2462 MHz [11] (15.0 dBm) * 2467 MHz [12] (15.0 dBm) (passive scanning, no IBSS) * 2472 MHz [13] (15.0 dBm) (passive scanning, no IBSS) Bitrates: * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps * 60.0 Mbps Band 2: HT capabilities: 0x087e * 20/40 MHz operation * SM PS disabled * HT-greenfield * 20 MHz short GI * 40 MHz short GI * max A-MSDU len 7935 HT A-MPDU factor: 0x0003 (65535 bytes) HT A-MPDU density: 0x0005 (4 usec) HT MCS set: ff ff ff 00 01 00 00 00 00 00 c2 01 01 00 00 00 Frequencies: * 5180 MHz [36] (disabled) * 5200 MHz [40] (disabled) * 5220 MHz [44] (disabled) * 5240 MHz [48] (disabled) * 5260 MHz [52] (disabled) * 5280 MHz [56] (disabled) * 5300 MHz [60] (disabled) * 5320 MHz [64] (disabled) * 5500 MHz [100] (disabled) * 5520 MHz [104] (disabled) * 5540 MHz [108] (disabled) * 5560 MHz [112] (disabled) * 5580 MHz [116] (disabled) * 5600 MHz [120] (disabled) * 5620 MHz [124] (disabled) * 5640 MHz [128] (disabled) * 5660 MHz [132] (disabled) * 5680 MHz [136] (disabled) * 5700 MHz [140] (disabled) * 5745 MHz [149] (disabled) * 5765 MHz [153] (disabled) * 5785 MHz [157] (disabled) * 5805 MHz [161] (disabled) * 5825 MHz [165] (disabled) Bitrates: * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps * 60.0 Mbps Supported interface modes: * IBSS * Station * Monitor My Cisco AIR-AP1131AG-E-K9_v04 access point with C1130 Software (C1130-K9W7-M), Version 12.4(10b)JA, RELEASE has Dot11Radio0 & Dot11Radio1 configured like so: world-mode dot11d country GB indoor The kernel seems to do something else: cfg80211: Calling CRDA for country: GB cfg80211: Current regulatory domain updated by AP to: GB (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) Any idea how that could happen please? Regards, Tony V.
Attachment:
signature.asc
Description: This is a digitally signed message part
