Search Linux Wireless

[PATCH] ath5k: ignore the return value of ath5k_hw_noise_floor_calibration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



hi,

some weeks ago Felix Fietkau posted a patch for the "ath5k phy0:
unsupported jumbo" warnings (see here:
http://article.gmane.org/gmane.linux.kernel.wireless.general/23430 )
I just had the same problem - after applying Felix' patch the warnings
went down from 50-100 per day to 5.

as a quick note: I did not just apply this patch, instead I replaced
Linus' upstream wireless stack with the one from wireless-testing
(using kernel version 2.6.28)

I hope Felix' patch can get into Linus' kernel (mainline) so other
users can profit from this

oh and just to make sure this patch will get accepted:
ath5k_hw_noise_floor_calibration was called without verifying it's
result in ath5k_hw_rf511x_calibrate -> so in theory this patch is
clean an get into mainline (just to be fair: I must admit I'm not
familiar with the mac80211 nor with ath5k code)

regards,
Martin
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux