Some very rare Ralink USB hardware exists which features
the RFKILL switch on the USB stick.
This patch adds the EEPROM check function to see if RFKILL
is supported and the polling function to rt2500usb and
rt73usb in order to support RFKILL for that hardware.
Signed-off-by: Ivo van Doorn <IvDoorn@xxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2500usb.c | 21 +++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2500usb.h | 8 ++++++++
drivers/net/wireless/rt2x00/rt73usb.c | 21 +++++++++++++++++++++
drivers/net/wireless/rt2x00/rt73usb.h | 13 +++++++++++++
4 files changed, 63 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 79f0771..ce76a87 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -280,6 +280,18 @@ static const struct rt2x00debug rt2500usb_rt2x00debug = {
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+#ifdef CONFIG_RT2X00_LIB_RFKILL
+static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
+{
+ u16 reg;
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®);
+ return rt2x00_get_field32(reg, MAC_CSR19_BIT7);
+}
+#else
+#define rt2500usb_rfkill_poll NULL
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
+
#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt2500usb_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
@@ -1606,6 +1618,14 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
+ * Detect if this device has an hardware controlled radio.
+ */
+#ifdef CONFIG_RT2X00_LIB_RFKILL
+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
+ __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
+
+ /*
* Check if the BBP tuning should be disabled.
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
@@ -1911,6 +1931,7 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
.uninitialize = rt2x00usb_uninitialize,
.clear_entry = rt2x00usb_clear_entry,
.set_device_state = rt2500usb_set_device_state,
+ .rfkill_poll = rt2500usb_rfkill_poll,
.link_stats = rt2500usb_link_stats,
.reset_tuner = rt2500usb_reset_tuner,
.link_tuner = rt2500usb_link_tuner,
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index 4347dfd..e1f714e 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -189,6 +189,14 @@
* MAC_CSR19: GPIO control register.
*/
#define MAC_CSR19 0x0426
+#define MAC_CSR19_BIT0 FIELD32(0x0001)
+#define MAC_CSR19_BIT1 FIELD32(0x0002)
+#define MAC_CSR19_BIT2 FIELD32(0x0004)
+#define MAC_CSR19_BIT3 FIELD32(0x0008)
+#define MAC_CSR19_BIT4 FIELD32(0x0010)
+#define MAC_CSR19_BIT5 FIELD32(0x0020)
+#define MAC_CSR19_BIT6 FIELD32(0x0040)
+#define MAC_CSR19_BIT7 FIELD32(0x0080)
/*
* MAC_CSR20: LED control register.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 5992c8f..2268d5c 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -186,6 +186,18 @@ static const struct rt2x00debug rt73usb_rt2x00debug = {
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+#ifdef CONFIG_RT2X00_LIB_RFKILL
+static int rt73usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
+{
+ u32 reg;
+
+ rt2x00usb_register_read(rt2x00dev, MAC_CSR13, ®);
+ return rt2x00_get_field32(reg, MAC_CSR13_BIT7);
+}
+#else
+#define rt73usb_rfkill_poll NULL
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
+
#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt73usb_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
@@ -1855,6 +1867,14 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
__set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
/*
+ * Detect if this device has an hardware controlled radio.
+ */
+#ifdef CONFIG_RT2X00_LIB_RFKILL
+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
+ __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
+
+ /*
* Read frequency offset.
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
@@ -2259,6 +2279,7 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
.uninitialize = rt2x00usb_uninitialize,
.clear_entry = rt2x00usb_clear_entry,
.set_device_state = rt73usb_set_device_state,
+ .rfkill_poll = rt73usb_rfkill_poll,
.link_stats = rt73usb_link_stats,
.reset_tuner = rt73usb_reset_tuner,
.link_tuner = rt73usb_link_tuner,
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 46e1405..204bbd5 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -267,6 +267,19 @@ struct hw_pairwise_ta_entry {
* MAC_CSR13: GPIO.
*/
#define MAC_CSR13 0x3034
+#define MAC_CSR13_BIT0 FIELD32(0x00000001)
+#define MAC_CSR13_BIT1 FIELD32(0x00000002)
+#define MAC_CSR13_BIT2 FIELD32(0x00000004)
+#define MAC_CSR13_BIT3 FIELD32(0x00000008)
+#define MAC_CSR13_BIT4 FIELD32(0x00000010)
+#define MAC_CSR13_BIT5 FIELD32(0x00000020)
+#define MAC_CSR13_BIT6 FIELD32(0x00000040)
+#define MAC_CSR13_BIT7 FIELD32(0x00000080)
+#define MAC_CSR13_BIT8 FIELD32(0x00000100)
+#define MAC_CSR13_BIT9 FIELD32(0x00000200)
+#define MAC_CSR13_BIT10 FIELD32(0x00000400)
+#define MAC_CSR13_BIT11 FIELD32(0x00000800)
+#define MAC_CSR13_BIT12 FIELD32(0x00001000)
/*
* MAC_CSR14: LED control register.
--
1.5.6.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
