From: Andrey Yurovsky <andrey@xxxxxxxxxxx>
This adds initial support for Mesh Point mode. For this we tell mac80211 that
we support NL80211_IFTYPE_MESH_POINT. We also need to send beacons. mac80211
will configure our RX filter accordingly.
Signed-off-by: Andrey Yurovsky <andrey@xxxxxxxxxxx>
Signed-off-by: Ivo van Doorn <IvDoorn@xxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2x00config.c | 1 +
drivers/net/wireless/rt2x00/rt2x00dev.c | 11 +++++++----
drivers/net/wireless/rt2x00/rt2x00mac.c | 1 +
3 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 2f4cb8d..a35265c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -42,6 +42,7 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
switch (type) {
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
conf.sync = TSF_SYNC_BEACON;
break;
case NL80211_IFTYPE_STATION:
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 1c49a9c..b484197 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -190,7 +190,8 @@ static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
struct rt2x00_intf *intf = vif_to_intf(vif);
if (vif->type != NL80211_IFTYPE_AP &&
- vif->type != NL80211_IFTYPE_ADHOC)
+ vif->type != NL80211_IFTYPE_ADHOC &&
+ vif->type != NL80211_IFTYPE_MESH_POINT)
return;
/*
@@ -782,7 +783,8 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
if (rt2x00dev->ops->bcn->entry_num > 0)
rt2x00dev->hw->wiphy->interface_modes |=
BIT(NL80211_IFTYPE_ADHOC) |
- BIT(NL80211_IFTYPE_AP);
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_MESH_POINT);
/*
* Let the driver probe the device to detect the capabilities.
@@ -937,10 +939,11 @@ static void rt2x00lib_resume_intf(void *data, u8 *mac,
/*
- * Master or Ad-hoc mode require a new beacon update.
+ * AP, Ad-hoc, and Mesh Point mode require a new beacon update.
*/
if (vif->type == NL80211_IFTYPE_AP ||
- vif->type == NL80211_IFTYPE_ADHOC)
+ vif->type == NL80211_IFTYPE_ADHOC ||
+ vif->type == NL80211_IFTYPE_MESH_POINT)
intf->delayed_flags |= DELAYED_UPDATE_BEACON;
spin_unlock(&intf->lock);
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 38edee5..137386e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -226,6 +226,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
break;
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MESH_POINT:
/*
* We don't support mixed combinations of
* sta and ap interfaces.
--
1.5.6.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
