> From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> Sent: Monday, September 2, 2024 9:11 PM
> To: David Lin <yu-hao.lin@xxxxxxx>
> Cc: Francesco Dolcini <francesco@xxxxxxxxxx>; Calvin Owens
> <calvin@xxxxxxxxxx>; Brian Norris <briannorris@xxxxxxxxxxxx>; Kalle Valo
> <kvalo@xxxxxxxxxx>; linux-wireless@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx
> Subject: Re: [EXT] [RFC PATCH 0/4] mwifiex: add support for iw61x
>
> > > > > > >
> > > > > > > Sascha
> > > > > > >
> > > > > > >
> > > > > > > Sascha Hauer (4):
> > > > > > > wifi: mwifiex: release firmware at remove time
> > > > > > > wifi: mwifiex: handle VDLL
> > > > > > > wifi: mwifiex: wait longer for SDIO card status
> > > > > > > mwifiex: add iw61x support
> > > > > > >
> > > > > > > drivers/net/wireless/marvell/mwifiex/cmdevt.c | 86
> > > > > +++++++++++++++++++
> > > > > > > drivers/net/wireless/marvell/mwifiex/fw.h | 16 ++++
> > > > > > > drivers/net/wireless/marvell/mwifiex/main.c | 9 +-
> > > > > > > drivers/net/wireless/marvell/mwifiex/main.h | 4 +
> > > > > > > drivers/net/wireless/marvell/mwifiex/sdio.c | 81
> > > ++++++++++++++++-
> > > > > > > drivers/net/wireless/marvell/mwifiex/sdio.h | 3 +
> > > > > > > .../net/wireless/marvell/mwifiex/sta_event.c | 4
> > > > > > > + .../net/wireless/marvell/mwifiex/uap_event.c | 4 +
> > > > > > > include/linux/mmc/sdio_ids.h | 3 +
> > > > > > > 9 files changed, 205 insertions(+), 5 deletions(-)
> > > > > > >
> > > > > > > --
> > > The VDLL support in the downstream driver supports a case when a
> > > VDLL event comes in while a command is being sent. I catched this
> > > with this
> > > test:
> > >
> > > if (adapter->cmd_sent) {
> > > mwifiex_dbg(adapter, MSG, "%s: adapter is busy\n",
> > > __func__);
> > > return -EBUSY;
> > > }
> > >
> > > The downstream driver defers handling of the VDLL event to the main
> > > process in this case. I haven't implemented this case in my patch
> > > because I wasn't able to trigger it, but is this the case you are referring to?
> > >
> >
> > Not only this code segment. In fact, you did not add VDLL data patch support
> to sdio.c.
> > If you try to add the code and do test, you will know what is missing in your
> code.
>
> Could you point me to the code you mean?
>
> Sascha
>
I only know the porting VDLL code in nxpwifi.
David
