Hi Bitterblue, Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx> wrote: > > All USB devices supported by rtw88 have the same problem: they don't > transmit beacons in AP mode. (Some?) SDIO devices are also affected. > The cause appears to be clearing BIT_EN_BCNQ_DL of REG_FWHW_TXQ_CTRL > before uploading the beacon reserved page, so don't clear the bit for > USB and SDIO devices. > > Tested with RTL8811CU and RTL8723DU. > > Cc: <stable@xxxxxxxxxxxxxxx> # 6.6.x > Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx> Can I say two below patchset are equivalent in your side? [Patchset 1: your v1] 13744097 New [1/2] wifi: rtw88: Fix USB devices not transmitting beacons 13744098 New [2/2] wifi: rtw88: Avoid using macid 0 in AP mode [Patchset 2: your v2 + mine] 13771597 New [v2] wifi: rtw88: Fix USB/SDIO devices not transmitting beacons 13767746 New wifi: rtw88: assign mac_id for vif/sta and update to TX desc If this can make AP mode on USB devices step forward, I will merge them ahead.
