Hi Felix,
On 8/16/24 5:53 PM, Felix Kaechele wrote:
I was somewhat hoping that it could fix the issues I'm having with my
QCA9379 as well, but it seems that's not the case.
Still getting
[ 7660.485652] ath10k_sdio mmc1:0001:1: failed to install key for vdev
0 peer 76:ac:b9:xx:xx:xx: -110
[ 7660.485679] wlan0: failed to set key (2, ff:ff:ff:ff:ff:ff) to
hardware (-110)
[ 7660.509935] wlan0: deauthenticating from 76:ac:b9:xx:xx:xx by local
choice (Reason: 1=UNSPECIFIED)
[ 7661.836653] wlan0: authenticate with b2:8b:a9:xx:xx:xx (local
address=de:56:bb:xx:xx:xx)
[ 7661.836685] wlan0: send auth to b2:8b:a9:xx:xx:xx (try 1/3)
[ 7661.849449] wlan0: authenticated
[ 7661.853884] wlan0: associate with b2:8b:a9:xx:xx:xx (try 1/3)
[ 7661.902242] wlan0: RX AssocResp from b2:8b:a9:xx:xx:xx
(capab=0x1111 status=0 aid=2)
[ 7661.913192] wlan0: associated
[ 7662.187718] wlan0: Limiting TX power to 24 (24 - 0) dBm as
advertised by b2:8b:a9:xx:xx:xx
once every hour.
That's unfortunate.
In your case it looks like a failure on a group re-key, which makes
sense that you would see a disconnect. Definitely unfortunate.
Regards,
Felix
