Search Linux Wireless

Re: [PATCH v3 1/7] wifi: rtw89: 8852bt: add set_channel_rf

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ping-Ke Shih <pkshih@xxxxxxxxxxx> wrote:

> Add RF part of set_channel() is to configure RF registers, and then
> hardware can TX/RX on specified frequency and bandwidth.
> 
> Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>

7 patch(es) applied to rtw-next branch of rtw.git, thanks.

6bd63e44e98e wifi: rtw89: 8852bt: add set_channel_rf
be457fbacea9 wifi: rtw89: 8852bt: rfk: use predefined string choice for DPK enable/disable
c4dea0481e23 wifi: rtw89: 8852bt: add chip_info of RTL8852BT
62eddca4d296 wifi: rtw89: 8852bt: add chip_ops of RTL8852BT
e67e15cb867c wifi: rtw89: 8852bt: declare firmware features of RTL8852BT
bbe48c328ff8 wifi: rtw89: 8852bte: add PCI entry of 8852BE-VT
b9cdbb06d4fc wifi: rtw89: 8852bt: add 8852BE-VT to Makefile and Kconfig

---
https://github.com/pkshih/rtw.git





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux