Add remaining materials and enable 8852BE-VT. Fow now, STA, AP and P2P
modes can work well, and throughput is around 900+ Mbps for TX/RX. Only
BT-coexistence code needs further update to work with BT enabled.
v3:
- add an new patch at 2/7 to avoid clang warning of precedence of
'?:' and '&'.
v2:
- add missing RTW89_8852BT entry to Kconfig by patch 6/6
(Reported by kernel test robot)
Ping-Ke Shih (7):
wifi: rtw89: 8852bt: add set_channel_rf
wifi: rtw89: 8852bt: rfk: use predefined string choice for DPK
enable/disable
wifi: rtw89: 8852bt: add chip_info of RTL8852BT
wifi: rtw89: 8852bt: add chip_ops of RTL8852BT
wifi: rtw89: 8852bt: declare firmware features of RTL8852BT
wifi: rtw89: 8852bte: add PCI entry of 8852BE-VT
wifi: rtw89: 8852bt: add 8852BE-VT to Makefile and Kconfig
drivers/net/wireless/realtek/rtw89/Kconfig | 15 +
drivers/net/wireless/realtek/rtw89/Makefile | 8 +
drivers/net/wireless/realtek/rtw89/coex.h | 2 +
drivers/net/wireless/realtek/rtw89/fw.c | 4 +
drivers/net/wireless/realtek/rtw89/fw.h | 17 +-
drivers/net/wireless/realtek/rtw89/mac.c | 7 +
drivers/net/wireless/realtek/rtw89/mac.h | 6 +
drivers/net/wireless/realtek/rtw89/reg.h | 58 +-
.../net/wireless/realtek/rtw89/rtw8852bt.c | 830 ++++++++++++++++++
.../net/wireless/realtek/rtw89/rtw8852bt.h | 2 +
.../wireless/realtek/rtw89/rtw8852bt_rfk.c | 228 ++++-
.../wireless/realtek/rtw89/rtw8852bt_rfk.h | 3 +
.../net/wireless/realtek/rtw89/rtw8852bte.c | 93 ++
13 files changed, 1268 insertions(+), 5 deletions(-)
create mode 100644 drivers/net/wireless/realtek/rtw89/rtw8852bt.c
create mode 100644 drivers/net/wireless/realtek/rtw89/rtw8852bte.c
--
2.25.1
