Currently, ath12k_wmi_pdev_dma_ring_cfg() fails due to an invalid pdev_id parameter passed to the WMI_PDEV_DMA_RING_CFG_REQ_CMDID WMI command. This invalid pdev_id is caused by a double conversion of the MAC ID. Since the the caller of ath12k_wmi_pdev_dma_ring_cfg() already performs the MAC ID conversion, it is unnecessary to do it again within the function. To fix this, remove the software (SW) to hardware (HW) MAC ID conversion from ath12k_wmi_pdev_dma_ring_cfg() to avoid this redundant conversion. Found in code review. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@xxxxxxxxxxx> --- drivers/net/wireless/ath/ath12k/wmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c index 7a52d2082b79..9e9f58b5cbfb 100644 --- a/drivers/net/wireless/ath/ath12k/wmi.c +++ b/drivers/net/wireless/ath/ath12k/wmi.c @@ -3808,7 +3808,7 @@ int ath12k_wmi_pdev_dma_ring_cfg(struct ath12k *ar, cmd->tlv_header = ath12k_wmi_tlv_cmd_hdr(WMI_TAG_DMA_RING_CFG_REQ, sizeof(*cmd)); - cmd->pdev_id = cpu_to_le32(DP_SW2HW_MACID(arg->pdev_id)); + cmd->pdev_id = cpu_to_le32(arg->pdev_id); cmd->module_id = cpu_to_le32(arg->module_id); cmd->base_paddr_lo = cpu_to_le32(arg->base_paddr_lo); cmd->base_paddr_hi = cpu_to_le32(arg->base_paddr_hi); base-commit: 2c4d8e19cf060744a9db466ffbaea13ab37f25ca -- 2.34.1
