kangyang <quic_kangyang@xxxxxxxxxxx> wrote: > When AP goes down or too far away without indication to STA, beacon miss > will be detected. Then for WCN7850's firmware, it will use roam event > to send beacon miss to host. > > If STA doesn't handle the beacon miss, will keep the fake connection > and unable to roam. > > So add support for WCN7850 to trigger disconnection from AP when > receiving this event from firmware. > > It has to be noted that beacon miss event notification for QCN9274 > to be handled in a separate patch as it uses STA kickout WMI event > to notify beacon miss and the current STA kickout event is processed > as low_ack. > > Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 > > Signed-off-by: Kang Yang <quic_kangyang@xxxxxxxxxxx> > Reviewed-by: Nicolas Escande <nico.escande@xxxxxxxxx> > Acked-by: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx> > Signed-off-by: Kalle Valo <quic_kvalo@xxxxxxxxxxx> Patch applied to ath-next branch of ath.git, thanks. b0afabc4d7e0 wifi: ath12k: add support to handle beacon miss for WCN7850 -- https://patchwork.kernel.org/project/linux-wireless/patch/20240412094447.2063-1-quic_kangyang@xxxxxxxxxxx/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
