Search Linux Wireless

Re: ath11k failed to enqueue rx buf: -28

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/27/2024 9:25 AM, James Prestwood wrote:
> Hi,
> 
> This error was brought to my attention in the kernel logs and I'm 
> wondering if it is of any concern:
> 
> kernel: ath11k_pci 0000:03:00.0: failed to enqueue rx buf: -28
> 
> It seems to happen every few minutes or so. I don't notice any bad 
> behavior associated with it per-se, but maybe its an issue of some 
> buffer needing to be increased in size? Does this mean a frame is being 
> dropped due to no room to receive it?
> 
> Hardware we are running is:
> 
> [    4.610399] ath11k_pci 0000:03:00.0: wcn6855 hw2.1
> [    5.777030] ath11k_pci 0000:03:00.0: chip_id 0x12 chip_family 0xb 
> board_id 0xff soc_id 0x400c1211
> [    5.777039] ath11k_pci 0000:03:00.0: fw_version 0x1109996e 
> fw_build_timestamp 2023-12-19 11:11 fw_build_id 
> WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.36
> 
> Thanks,
> 
> James
> 
> 

+ ath11k list to get more specific eyes on this issue
+ bcc to internal list as well





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux