Search Linux Wireless

Re: ath11k failed to enqueue rx buf: -28

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+ CC ath11k

On 3/27/24 9:25 AM, James Prestwood wrote:
Hi,

This error was brought to my attention in the kernel logs and I'm wondering if it is of any concern:

kernel: ath11k_pci 0000:03:00.0: failed to enqueue rx buf: -28

It seems to happen every few minutes or so. I don't notice any bad behavior associated with it per-se, but maybe its an issue of some buffer needing to be increased in size? Does this mean a frame is being dropped due to no room to receive it?

Hardware we are running is:

[    4.610399] ath11k_pci 0000:03:00.0: wcn6855 hw2.1
[    5.777030] ath11k_pci 0000:03:00.0: chip_id 0x12 chip_family 0xb board_id 0xff soc_id 0x400c1211 [    5.777039] ath11k_pci 0000:03:00.0: fw_version 0x1109996e fw_build_timestamp 2023-12-19 11:11 fw_build_id WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.36

Thanks,

James





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux