Clear bit 8 of REG_SYS_STATUS1 after MAC power on.
Without this, some RTL8821CU and RTL8811CU cannot connect to any
network:
Feb 19 13:33:11 ideapad2 kernel: wlp3s0f3u2: send auth to
90:55:de:__:__:__ (try 1/3)
Feb 19 13:33:13 ideapad2 kernel: wlp3s0f3u2: send auth to
90:55:de:__:__:__ (try 2/3)
Feb 19 13:33:14 ideapad2 kernel: wlp3s0f3u2: send auth to
90:55:de:__:__:__ (try 3/3)
Feb 19 13:33:15 ideapad2 kernel: wlp3s0f3u2: authentication with
90:55:de:__:__:__ timed out
The RTL8822CU and RTL8822BU out-of-tree drivers do this as well, so do
it for all three types of chips.
Tested with RTL8811CU (Tenda U9 V2.0).
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx>
---
drivers/net/wireless/realtek/rtw88/mac.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw88/mac.c b/drivers/net/wireless/realtek/rtw88/mac.c
index 298663b03580..a3b2c57c5503 100644
--- a/drivers/net/wireless/realtek/rtw88/mac.c
+++ b/drivers/net/wireless/realtek/rtw88/mac.c
@@ -309,6 +309,14 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on)
pwr_seq = pwr_on ? chip->pwr_on_seq : chip->pwr_off_seq;
ret = rtw_pwr_seq_parser(rtwdev, pwr_seq);
+ if (pwr_seq == chip->pwr_on_seq &&
+ rtw_hci_type(rtwdev) == RTW_HCI_TYPE_USB) {
+ if (chip->id == RTW_CHIP_TYPE_8822C ||
+ chip->id == RTW_CHIP_TYPE_8822B ||
+ chip->id == RTW_CHIP_TYPE_8821C)
+ rtw_write8_clr(rtwdev, REG_SYS_STATUS1 + 1, BIT(0));
+ }
+
if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_SDIO)
rtw_write32(rtwdev, REG_SDIO_HIMR, imr);
--
2.43.2
