As we did for ath11k lets remove the unused scan_flags from struct
ath12k_wmi_scan_req_arg. This will prevent us from using out of sync values
between WMI_SCAN_XXX & scan_f_xxx bitfield.
While at it remove the underlying wrapping struct/union construct as it serves
no purpose anymore.
Signed-off-by: Nicolas Escande <nico.escande@xxxxxxxxx>
---
drivers/net/wireless/ath/ath12k/wmi.h | 55 ++++++++++++---------------
1 file changed, 25 insertions(+), 30 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index 4bd1d0f270a1..892f21f95ee5 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -3311,36 +3311,31 @@ struct ath12k_wmi_scan_req_arg {
u32 idle_time;
u32 max_scan_time;
u32 probe_delay;
- union {
- struct {
- u32 scan_f_passive:1,
- scan_f_bcast_probe:1,
- scan_f_cck_rates:1,
- scan_f_ofdm_rates:1,
- scan_f_chan_stat_evnt:1,
- scan_f_filter_prb_req:1,
- scan_f_bypass_dfs_chn:1,
- scan_f_continue_on_err:1,
- scan_f_offchan_mgmt_tx:1,
- scan_f_offchan_data_tx:1,
- scan_f_promisc_mode:1,
- scan_f_capture_phy_err:1,
- scan_f_strict_passive_pch:1,
- scan_f_half_rate:1,
- scan_f_quarter_rate:1,
- scan_f_force_active_dfs_chn:1,
- scan_f_add_tpc_ie_in_probe:1,
- scan_f_add_ds_ie_in_probe:1,
- scan_f_add_spoofed_mac_in_probe:1,
- scan_f_add_rand_seq_in_probe:1,
- scan_f_en_ie_whitelist_in_probe:1,
- scan_f_forced:1,
- scan_f_2ghz:1,
- scan_f_5ghz:1,
- scan_f_80mhz:1;
- };
- u32 scan_flags;
- };
+ u32 scan_f_passive:1,
+ scan_f_bcast_probe:1,
+ scan_f_cck_rates:1,
+ scan_f_ofdm_rates:1,
+ scan_f_chan_stat_evnt:1,
+ scan_f_filter_prb_req:1,
+ scan_f_bypass_dfs_chn:1,
+ scan_f_continue_on_err:1,
+ scan_f_offchan_mgmt_tx:1,
+ scan_f_offchan_data_tx:1,
+ scan_f_promisc_mode:1,
+ scan_f_capture_phy_err:1,
+ scan_f_strict_passive_pch:1,
+ scan_f_half_rate:1,
+ scan_f_quarter_rate:1,
+ scan_f_force_active_dfs_chn:1,
+ scan_f_add_tpc_ie_in_probe:1,
+ scan_f_add_ds_ie_in_probe:1,
+ scan_f_add_spoofed_mac_in_probe:1,
+ scan_f_add_rand_seq_in_probe:1,
+ scan_f_en_ie_whitelist_in_probe:1,
+ scan_f_forced:1,
+ scan_f_2ghz:1,
+ scan_f_5ghz:1,
+ scan_f_80mhz:1;
enum scan_dwelltime_adaptive_mode adaptive_dwell_time_mode;
u32 burst_duration;
u32 num_chan;
--
2.43.0
