As discussed in [1] to fix the mismatch between the WMI_SCAN_XXX macros & their corresponding scan_f_xxx bitfield equivalent, lets stop using the scan_flags in the union altogether. [1] https://lore.kernel.org/all/4be7d62e-cb59-462d-aac2-94e27efc22ff@xxxxxxxxxxx/ Tested-on: QCN9274 hw2.0 PCI CI_WLAN.WBE.1.3-02907.1-QCAHKSWPL_SILICONZ-10 Signed-off-by: Nicolas Escande <nico.escande@xxxxxxxxx> --- drivers/net/wireless/ath/ath12k/mac.c | 4 ++-- drivers/net/wireless/ath/ath12k/wmi.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c index a737a09a0b9c..7d3f5321a36d 100644 --- a/drivers/net/wireless/ath/ath12k/mac.c +++ b/drivers/net/wireless/ath/ath12k/mac.c @@ -3201,7 +3201,7 @@ static int ath12k_mac_op_hw_scan(struct ieee80211_hw *hw, for (i = 0; i < arg.num_ssids; i++) arg.ssid[i] = req->ssids[i]; } else { - arg.scan_flags |= WMI_SCAN_FLAG_PASSIVE; + arg.scan_f_passive = 1; } if (req->n_channels) { @@ -7555,7 +7555,7 @@ static int ath12k_mac_op_remain_on_channel(struct ieee80211_hw *hw, arg.dwell_time_active = scan_time_msec; arg.dwell_time_passive = scan_time_msec; arg.max_scan_time = scan_time_msec; - arg.scan_flags |= WMI_SCAN_FLAG_PASSIVE; + arg.scan_f_passive = 1; arg.burst_duration = duration; ret = ath12k_start_scan(ar, &arg); diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c index 84d7d6584fba..2c2a010d88df 100644 --- a/drivers/net/wireless/ath/ath12k/wmi.c +++ b/drivers/net/wireless/ath/ath12k/wmi.c @@ -2194,7 +2194,7 @@ void ath12k_wmi_start_scan_init(struct ath12k *ar, WMI_SCAN_EVENT_BSS_CHANNEL | WMI_SCAN_EVENT_FOREIGN_CHAN | WMI_SCAN_EVENT_DEQUEUED; - arg->scan_flags |= WMI_SCAN_CHAN_STAT_EVENT; + arg->scan_f_chan_stat_evnt = 1; arg->num_bssid = 1; /* fill bssid_list[0] with 0xff, otherwise bssid and RA will be -- 2.43.0
