[PATCH v6 11/11] wifi: ath12k: advertise P2P dev support for WCN7850

[Kang Yang <quic_kangyang@xxxxxxxxxxx>]

Now that all the necessary pieces are implemented we can enable P2P
support for WCN7850.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <quic_kangyang@xxxxxxxxxxx>
---

v6: no change.
v5: no change.
v4: no change.
v3: no change.
v2:
    1. add Tested-on tag of QCN9274.
    2. update copyright.

---
 drivers/net/wireless/ath/ath12k/hw.c  | 7 +++++--
 drivers/net/wireless/ath/ath12k/mac.c | 8 ++++++++
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/hw.c b/drivers/net/wireless/ath/ath12k/hw.c
index cbb6e2b6d826..b804d9f88a1b 100644
--- a/drivers/net/wireless/ath/ath12k/hw.c
+++ b/drivers/net/wireless/ath/ath12k/hw.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <linux/types.h>
@@ -953,7 +953,10 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
 		.vdev_start_delay = true,
 
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
-				   BIT(NL80211_IFTYPE_AP),
+				   BIT(NL80211_IFTYPE_AP) |
+				   BIT(NL80211_IFTYPE_P2P_DEVICE) |
+				   BIT(NL80211_IFTYPE_P2P_CLIENT) |
+				   BIT(NL80211_IFTYPE_P2P_GO),
 		.supports_monitor = false,
 
 		.idle_ps = true,
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 6b8b92d22553..1632cd3322fa 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -5745,17 +5745,25 @@ static int ath12k_mac_op_add_interface(struct ieee80211_hw *hw,
 	case NL80211_IFTYPE_UNSPECIFIED:
 	case NL80211_IFTYPE_STATION:
 		arvif->vdev_type = WMI_VDEV_TYPE_STA;
+		if (vif->p2p)
+			arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_CLIENT;
 		break;
 	case NL80211_IFTYPE_MESH_POINT:
 		arvif->vdev_subtype = WMI_VDEV_SUBTYPE_MESH_11S;
 		fallthrough;
 	case NL80211_IFTYPE_AP:
 		arvif->vdev_type = WMI_VDEV_TYPE_AP;
+		if (vif->p2p)
+			arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_GO;
 		break;
 	case NL80211_IFTYPE_MONITOR:
 		arvif->vdev_type = WMI_VDEV_TYPE_MONITOR;
 		ar->monitor_vdev_id = bit;
 		break;
+	case NL80211_IFTYPE_P2P_DEVICE:
+		arvif->vdev_type = WMI_VDEV_TYPE_STA;
+		arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE;
+		break;
 	default:
 		WARN_ON(1);
 		break;
-- 
2.34.1