James Prestwood <prestwoj@xxxxxxxxx> writes: > Hi, > > I've noticed a somewhat rare behavior (<1% of the time) where bringing > an interface up fails after disabling power save. This is done by IWD > when a user-option is enabled, and follows an interface > removal/creation. The sequence is: > > 1. Remove default interface > > 2. Create new interface > > 3. Disable power save on new interface > > 4. Bring up new interface (rarely fails with -110). > > iwd[1286641]: src/netdev.c:netdev_disable_ps_cb() Disabled power save > for ifindex 54 > kernel: ath10k_pci 0000:02:00.0: wmi service ready event not received > iwd[1286641]: Error bringing interface 54 up: Connection timed out > kernel: ath10k_pci 0000:02:00.0: Could not init core: -110 So I guess you have a test setup to reproduce this easily? How long does it take to see this? What hardware and firmware version are you using? > I'm thinking maybe there is a race between creating the fresh > interface and disabling PS, then bringing the interface back up? Yeah, looks like it. If it's relatively easy for you to reproduce this you could try adding delays to suitable spots in ath10k. That might be give more ideas where the race is exactly. > Setting PS after the interface is up (so far) seems to be 100% > reliable and have not yet seen this behavior. Regardless of any kernel > fixes I'll need to reorder the command sequence in IWD to support > existing kernels, but before I work around this issue I wanted to > point it out so its not hidden from view. To me working around this in user space doesn't sound like a good idea. I would rather have a workaround in the kernel (but obviously I hope we can find a proper fix). -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
