On 9/20/2023 1:23 AM, Wen Gong wrote:
When station is connected to a 6 GHz AP, it has 2 way to configure the power limit to firmware. The first way is to send 2 wmi command WMI_PDEV_PARAM_TXPOWER_LIMIT2G/WMI_PDEV_PARAM_TXPOWER_LIMIT5G to firmware, the second way is to send WMI_VDEV_SET_TPC_POWER_CMDID to firmware which include more parameters for power control. The first way is disabled in previous patch "ath11k: discard BSS_CHANGED_TXPOWER when EXT_TPC_REG_SUPPORT for 6 GHz". Prepare the parameter for wmi command WMI_VDEV_SET_TPC_POWER_CMDID and send the firmware after vdev start response success from firmware, it is for the second way of power control. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Wen Gong <quic_wgong@xxxxxxxxxxx>
As previously mentioned I'd squash this with patch 11
