Currently when wlan load up, station always use the 6 GHz reg rules of
AP mode by commit 91fa00fa6922 ("wifi: ath11k: add support to parse new
WMI event for 6 GHz"), then the tx power and frequency are not correct,
so fix it by dynamic switch to client mode LPI/SP/VLP for station after
interface added and connected for station.
v5: change per Kalle and rebased to ath.git ath-202306211808
1. ath11k_ieee80211_ap_pwr_type_convert() to ath11k_reg_ap_pwr_convert()
2. used list_first_entry_or_null() and add comments
3. ath11k_dbg() to ath11k_warn()
4. ath11k_hw_supports_6g_cc_ext() to ath11k_mac_supports_6g_cc_ext()
5. add mesh in commit log
v4: (NOT depends to any patch now).
1. removed patches which depends on
wifi: cfg80211: save Power Spectral Density (PSD) of the regulatory rule
https://lore.kernel.org/linux-wireless/20230315132904.31779-3-quic_adisi@xxxxxxxxxxx/
removed:
[v3,08/15] wifi: ath11k: save power spectral density(psd) of regulatory rule
[v3,09/15] wifi: ath11k: add parse of transmit power envelope element
[v3,10/15] wifi: ath11k: save max tx power in vdev start response event from firmware
[v3,11/15] wifi: ath11k: fill parameters for vdev_set_tpc_power wmi command
[v3,12/15] wifi: ath11k: add WMI_TLV_SERVICE_EXT_TPC_REG_SUPPORT service bit
[v3,13/15] wifi: ath11k: discard BSS_CHANGED_TXPOWER when EXT_TPC_REG_SUPPORT for 6 GHz
[v3,14/15] wifi: ath11k: add handler for WMI_VDEV_SET_TPC_POWER_CMDID
[v3,15/15] wifi: ath11k: send TPC power to firmware for 6 GHz station
2. rebased to ath.git ath-202304281700
3. deleted "wifi: ath11k: Add support to parse new wmi event for 6 GHz regulatory" which is alreay upstream.
link of v3:
[v3,00/15] wifi: ath11k: add support for 6 GHz station for various modes : LPI, SP and VLP
https://patchwork.kernel.org/project/linux-wireless/cover/20220913051518.23051-1-quic_wgong@xxxxxxxxxxx/
v3:
1. added "ath11k: fix a possible dead lock caused by ab->base_lock".
3. deleted "ath11k: add support for extended wmi service bit" which is alreay upstream.
v2:
1. change some minor comments by Kalle.
2. rebased to ath.git ath-202112220603
Baochen Qiang (1):
wifi: ath11k: fix a possible dead lock caused by ab->base_lock
Wen Gong (4):
wifi: ath11k: add support to select 6 GHz regulatory type
wifi: ath11k: store cur_regulatory_info for each radio
wifi: ath11k: update regulatory rules when interface added
wifi: ath11k: update regulatory rules when connect to AP on 6 GHz band
for station
drivers/net/wireless/ath/ath11k/core.h | 1 +
drivers/net/wireless/ath/ath11k/mac.c | 28 +++++
drivers/net/wireless/ath/ath11k/mac.h | 3 +-
drivers/net/wireless/ath/ath11k/reg.c | 72 +++++++++---
drivers/net/wireless/ath/ath11k/reg.h | 4 +-
drivers/net/wireless/ath/ath11k/wmi.c | 150 +++++++++++++++++--------
drivers/net/wireless/ath/ath11k/wmi.h | 5 +
7 files changed, 201 insertions(+), 62 deletions(-)
base-commit: b21fe5be53eb873c02e7479372726c8aeed171e3
--
2.40.1
