Currently, the encoding rule for field mlo_capable in struct
qmi_wlanfw_host_cap_req_msg_v01 defined in array
qmi_wlanfw_host_cap_req_msg_v01_ei uses type QMI_OPT_FLAG.
Unfortunately, all ath12k firmware actually expects this field to be of
type NON QMI_OPT_FLAG such as QMI_UNSIGNED_1_BYTE/QMI_UNSIGNED_8_BYTE...
And as a result, firmware is unable to correctly decode the mlo_capable
field.
Change the ath12k definition as QMI_UNSIGNED_1_BYTE to match the firmware
definition so that firmware can correctly parse the mlo_capable info from
message QMI_WLANFW_HOST_CAP_REQ_V01 at wlan load time.
This is just an accidental typo and that both WCN7850 and QCN9274 firmwares
use QMI_UNSIGNED_1_BYTE.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Wen Gong <quic_wgong@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath12k/qmi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath12k/qmi.c b/drivers/net/wireless/ath/ath12k/qmi.c
index 4afba76b90fe..83a79b25c32f 100644
--- a/drivers/net/wireless/ath/ath12k/qmi.c
+++ b/drivers/net/wireless/ath/ath12k/qmi.c
@@ -387,7 +387,7 @@ static struct qmi_elem_info qmi_wlanfw_host_cap_req_msg_v01_ei[] = {
mlo_capable_valid),
},
{
- .data_type = QMI_OPT_FLAG,
+ .data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
base-commit: b21fe5be53eb873c02e7479372726c8aeed171e3
--
2.40.1
