Hello Ping-Ke, certain Amlogic SDIO host controllers have a limit of receiving/transmitting at most 1536 bytes at a time. It turns out that rtw_sdio_enable_rx_aggregation() from rtw88/sdio.c is not taking this into account currently. For any RX buffer that is bigger than 1536 bytes (which can happen due to RX aggregation) we're unable to do any processing on the host side because all bytes beyond the 1536 bytes mark are lost. Lukas found that limiting BIT_RXDMA_AGG_PG_TH to 0x6 makes his RTL8822CS work on the affected Amlogic SoCs. My question now is: how can we properly limit BIT_RXDMA_AGG_PG_TH without hard-coding a one-fits-all value (which may reduce performance)? Initially I thought that we could just calculate it: host_max_pages = mmc_host->max_req_size / rtwdev->chip->page_size max_req_size for the affected controller is 1536 and chip->page_size is 128, so the result would be 12 (I thought it would be close to this number, maybe +/-1). Unfortunately this doesn't fix the issue and for his board BIT_RXDMA_AGG_PG_TH the limit is 6 or 7. If you could describe how BIT_RXDMA_AGG_PG_TH generally works I can come up with the algorithm to calculate the limit on my own (at least I hope so). Lukas has been very patient with testing so far and I understood that he's willing to test further patches if we think that it fixes the rtw88 driver issue he's seeing. Thank you and best regards, Martin
