On 22/03/2023 19:18, Martin Kaistra wrote:
> This gets called at the start of AP mode operation. Set bssid, beacon
> interval and send a connect report to the HW.
>
Hmm, but why send a connect report when you don't have anything
connected yet?
> Signed-off-by: Martin Kaistra <martin.kaistra@xxxxxxxxxxxxx>
> ---
> .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
> index c152b228606f1..90b98b9dcbd9d 100644
> --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
> +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
> @@ -4899,6 +4899,20 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
> return;
> }
>
> +static int rtl8xxxu_start_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
> + struct ieee80211_bss_conf *link_conf)
> +{
> + struct rtl8xxxu_priv *priv = hw->priv;
> + struct device *dev = &priv->udev->dev;
> +
> + dev_dbg(dev, "Start AP mode\n");
> + rtl8xxxu_set_bssid(priv, vif->bss_conf.bssid);
> + rtl8xxxu_write16(priv, REG_BCN_INTERVAL, vif->bss_conf.beacon_int);
> + priv->fops->report_connect(priv, 0, true);
> +
> + return 0;
> +}
> +
> static u32 rtl8xxxu_80211_to_rtl_queue(u32 queue)
> {
> u32 rtlqueue;
> @@ -7026,6 +7040,7 @@ static const struct ieee80211_ops rtl8xxxu_ops = {
> .config = rtl8xxxu_config,
> .conf_tx = rtl8xxxu_conf_tx,
> .bss_info_changed = rtl8xxxu_bss_info_changed,
> + .start_ap = rtl8xxxu_start_ap,
> .configure_filter = rtl8xxxu_configure_filter,
> .set_rts_threshold = rtl8xxxu_set_rts_threshold,
> .start = rtl8xxxu_start,
