Hi Larry, On Sat, Mar 04, 2023 at 08:52:26PM -0600, Larry Finger wrote: > Sascha an Ping-Ke, > > I have been testing the RTW8822BU driver found in my rtw88 GitHub repo. This > code matches the code found in wireless-next. I created 9 files of 5.8 GiB > each and used a for loop to copy them from the test computer to/from my > server. The wireless connection is on the 5 GHz band (channel 153) connected > to an ax1500 Wifi 6 router, which in turn is connected to the server via a > 1G ethernet cable. The connection has not crashed, but I see strange > behavior. What chipset are you using? Is it a RTL8822bu or some other chipset reported by the driver? > > With both TX and RX, the rate is high at 13.5 MiB/s for RX and 11.1 MiB/s > for TX for about 1/3 of the time, but then the driver reports "timed out to > flush queue 3" and the rate drops to 3-5 MiB/s for RX and 2-3 MiB/s for TX. > These low rates are in effect for 2/3 of the time. The 5G bands are > relatively unused in my house, thus I do not suspect interference. I've received a very similar report this weekend. About 3-4 messages per second, "timed out to flush queue 3", but driver continues to work. I've also seen it this morning by accident and once again while writing this mail. This was on a RTL8821CU. So far I have no idea what the problem might be. Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
