Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx> writes: > Currently, WLAN chip is powered once during driver probe and is kept > ON (powered) always even when WLAN is not active; keeping the chip > powered ON all the time will consume extra power which is not > desirable for battery operated devices. Same is the case with non-WoW > suspend, chip will not be put into low power mode when the system is > suspended resulting in higher battery drain. > > Send QMI MODE OFF command to firmware during WiFi OFF to put device > into low power mode. > > Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 > Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.16 > > Manikanta Pubbisetty (3): > ath11k: Fix double free issue during SRNG deinit > ath11k: Move hardware initialization logic to start() > ath11k: Enable low power mode when WLAN is not active Nowadays we use "wifi:" prefix, but I can add it. -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
