Search Linux Wireless

[PATCH v2 5/5] wifi: rtl8xxxu: Use dev_info instead of pr_info

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Replace two instances of bare pr_info with dev_info.

Also make their messages a little more informative.

Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx>
---
v2:
 - No change.
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 8bab7247460d..9d5ae83dad70 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -2015,7 +2015,8 @@ static int rtl8xxxu_download_firmware(struct rtl8xxxu_priv *priv)
 
 	val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL);
 	if (val8 & MCU_FW_RAM_SEL) {
-		pr_info("do the RAM reset\n");
+		dev_info(&priv->udev->dev,
+			 "Firmware is already running, resetting the MCU.\n");
 		rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
 		priv->fops->reset_8051(priv);
 	}
@@ -5420,7 +5421,8 @@ static void rtl8xxxu_rx_urb_work(struct work_struct *work)
 			rtl8xxxu_queue_rx_urb(priv, rx_urb);
 			break;
 		default:
-			pr_info("failed to requeue urb %i\n", ret);
+			dev_info(&priv->udev->dev,
+				 "failed to requeue urb with error %i\n", ret);
 			skb = (struct sk_buff *)rx_urb->urb.context;
 			dev_kfree_skb(skb);
 			usb_free_urb(&rx_urb->urb);
-- 
2.38.0



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux