*Properly get/set all available ISR/IMR values and review common/uncommon bits *Better handling of per-txq interrupts (we can now resolve what q is generating each interrupt -this will help in debuging wme later) *Some minor updates from legacy-hal *Properly handle RXNOFRM and TXNOFRM interrupt masking (even when we don't set them on IMR they keep showing up, so we disable them by zeroing AR5K_RXNOFRM and AR5K_TXNOFRM registers). This doesn't exist on legacy-hal but i've tested it on various cards and it works fine. Changes-Licensed-under: ISC Signed-Off-by: Nick Kossifidis <mickflemm@xxxxxxxxx> --- diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h index 53ea439..b117920 100644 --- a/drivers/net/wireless/ath5k/ath5k.h +++ b/drivers/net/wireless/ath5k/ath5k.h @@ -507,11 +507,15 @@ enum ath5k_tx_queue_id { #define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ #define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ #define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ -#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0020 /* Disable random post-backoff */ -#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0040 /* Enable ready time expiry policy (?)*/ -#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0080 /* Enable backoff while bursting */ -#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x0100 /* Disable backoff while bursting */ -#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x0200 /* Enable hw compression -not implemented-*/ +#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */ +#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */ +#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */ +#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */ +#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */ +#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/ +#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */ +#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ +#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ /* * A struct to hold tx queue's parameters @@ -853,7 +857,7 @@ enum ath5k_ant_setting { * checked. We should do this with ath5k_hw_update_mib_counters() but * it seems we should also then do some noise immunity work. * @AR5K_INT_RXPHY: RX PHY Error - * @AR5K_INT_RXKCM: ?? + * @AR5K_INT_RXKCM: RX Key cache miss * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a * beacon that must be handled in software. The alternative is if you * have VEOL support, in that case you let the hardware deal with things. @@ -869,7 +873,7 @@ enum ath5k_ant_setting { * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA * errors. These types of errors we can enable seem to be of type * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. - * @AR5K_INT_GLOBAL: Seems to be used to clear and set the IER + * @AR5K_INT_GLOBAL: Used to clear and set the IER * @AR5K_INT_NOCARD: signals the card has been removed * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same * bit value @@ -881,36 +885,61 @@ enum ath5k_ant_setting { * MACs. */ enum ath5k_int { - AR5K_INT_RX = 0x00000001, /* Not common */ + AR5K_INT_RXOK = 0x00000001, AR5K_INT_RXDESC = 0x00000002, + AR5K_INT_RXERR = 0x00000004, AR5K_INT_RXNOFRM = 0x00000008, AR5K_INT_RXEOL = 0x00000010, AR5K_INT_RXORN = 0x00000020, - AR5K_INT_TX = 0x00000040, /* Not common */ + AR5K_INT_TXOK = 0x00000040, AR5K_INT_TXDESC = 0x00000080, + AR5K_INT_TXERR = 0x00000100, + AR5K_INT_TXNOFRM = 0x00000200, + AR5K_INT_TXEOL = 0x00000400, AR5K_INT_TXURN = 0x00000800, AR5K_INT_MIB = 0x00001000, + AR5K_INT_SWI = 0x00002000, AR5K_INT_RXPHY = 0x00004000, AR5K_INT_RXKCM = 0x00008000, AR5K_INT_SWBA = 0x00010000, + AR5K_INT_BRSSI = 0x00020000, AR5K_INT_BMISS = 0x00040000, - AR5K_INT_BNR = 0x00100000, /* Not common */ - AR5K_INT_GPIO = 0x01000000, - AR5K_INT_FATAL = 0x40000000, /* Not common */ - AR5K_INT_GLOBAL = 0x80000000, - - AR5K_INT_COMMON = AR5K_INT_RXNOFRM - | AR5K_INT_RXDESC - | AR5K_INT_RXEOL - | AR5K_INT_RXORN - | AR5K_INT_TXURN - | AR5K_INT_TXDESC - | AR5K_INT_MIB - | AR5K_INT_RXPHY - | AR5K_INT_RXKCM - | AR5K_INT_SWBA - | AR5K_INT_BMISS - | AR5K_INT_GPIO, + AR5K_INT_FATAL = 0x00080000, /* Non common */ + AR5K_INT_BNR = 0x00100000, /* Non common */ + AR5K_INT_TIM = 0x00200000, /* Non common */ + AR5K_INT_DTIM = 0x00400000, /* Non common */ + AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */ + AR5K_INT_GPIO = 0x01000000, + AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ + AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ + AR5K_INT_RX_DOPPLER = 0x08000000, /* Non common */ + AR5K_INT_QCBRORN = 0x10000000, /* Non common */ + AR5K_INT_QCBRURN = 0x20000000, /* Non common */ + AR5K_INT_QTRIG = 0x40000000, /* Non common */ + AR5K_INT_GLOBAL = 0x80000000, + + AR5K_INT_COMMON = AR5K_INT_RXOK + | AR5K_INT_RXDESC + | AR5K_INT_RXERR + | AR5K_INT_RXNOFRM + | AR5K_INT_RXEOL + | AR5K_INT_RXORN + | AR5K_INT_TXOK + | AR5K_INT_TXDESC + | AR5K_INT_TXERR + | AR5K_INT_TXNOFRM + | AR5K_INT_TXEOL + | AR5K_INT_TXURN + | AR5K_INT_MIB + | AR5K_INT_SWI + | AR5K_INT_RXPHY + | AR5K_INT_RXKCM + | AR5K_INT_SWBA + | AR5K_INT_BRSSI + | AR5K_INT_BMISS + | AR5K_INT_GPIO + | AR5K_INT_GLOBAL, + AR5K_INT_NOCARD = 0xffffffff }; @@ -1081,6 +1110,11 @@ struct ath5k_hw { u32 ah_txq_imr_txurn; u32 ah_txq_imr_txdesc; u32 ah_txq_imr_txeol; + u32 ah_txq_imr_cbrorn; + u32 ah_txq_imr_cbrurn; + u32 ah_txq_imr_qtrig; + u32 ah_txq_imr_nofrm; + u32 ah_txq_isr; u32 *ah_rf_banks; size_t ah_rf_banks_size; struct ath5k_gain ah_gain; diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 3e0eea5..5e90ef3 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2234,7 +2234,7 @@ ath5k_init(struct ath5k_softc *sc, bool is_resume) */ sc->curchan = sc->hw->conf.channel; sc->curband = &sc->sbands[sc->curchan->band]; - sc->imask = AR5K_INT_RX | AR5K_INT_TX | AR5K_INT_RXEOL | + sc->imask = AR5K_INT_RXOK | AR5K_INT_TXOK | AR5K_INT_RXEOL | AR5K_INT_RXORN | AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB; ret = ath5k_reset(sc, false, false); @@ -2421,9 +2421,10 @@ ath5k_intr(int irq, void *dev_id) /* bump tx trigger level */ ath5k_hw_update_tx_triglevel(ah, true); } - if (status & AR5K_INT_RX) + if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR)) tasklet_schedule(&sc->rxtq); - if (status & AR5K_INT_TX) + if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC + | AR5K_INT_TXERR | AR5K_INT_TXEOL)) tasklet_schedule(&sc->txtq); if (status & AR5K_INT_BMISS) { } diff --git a/drivers/net/wireless/ath5k/dma.c b/drivers/net/wireless/ath5k/dma.c index 7adceb2..7e2b1a6 100644 --- a/drivers/net/wireless/ath5k/dma.c +++ b/drivers/net/wireless/ath5k/dma.c @@ -472,9 +472,6 @@ bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah) * * NOTE: We use read-and-clear register, so after this function is called ISR * is zeroed. - * - * XXX: Why filter interrupts in sw with interrupt_mask ? No benefit at all - * plus it can be misleading (one might thing that we save interrupts this way) */ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) { @@ -494,11 +491,16 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) } } else { /* - * Read interrupt status from the Read-And-Clear - * shadow register. + * Read interrupt status from Interrupt + * Status Register shadow copy (Read And Clear) + * * Note: PISR/SISR Not available on 5210 */ data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR); + if (unlikely(data == AR5K_INT_NOCARD)) { + *interrupt_mask = data; + return -ENODEV; + } } /* @@ -506,17 +508,9 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) */ *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr; - if (unlikely(data == AR5K_INT_NOCARD)) - return -ENODEV; - - if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR)) - *interrupt_mask |= AR5K_INT_RX; - - if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR - | AR5K_ISR_TXDESC | AR5K_ISR_TXEOL)) - *interrupt_mask |= AR5K_INT_TX; - if (ah->ah_version != AR5K_AR5210) { + u32 sisr2 = ath5k_hw_reg_read(ah, AR5K_RAC_SISR2); + /*HIU = Host Interface Unit (PCI etc)*/ if (unlikely(data & (AR5K_ISR_HIUERR))) *interrupt_mask |= AR5K_INT_FATAL; @@ -524,24 +518,93 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) /*Beacon Not Ready*/ if (unlikely(data & (AR5K_ISR_BNR))) *interrupt_mask |= AR5K_INT_BNR; - } - /* - * XXX: BMISS interrupts may occur after association. - * I found this on 5210 code but it needs testing. If this is - * true we should disable them before assoc and re-enable them - * after a successfull assoc + some jiffies. - */ -#if 0 - interrupt_mask &= ~AR5K_INT_BMISS; -#endif + if (unlikely(sisr2 & (AR5K_SISR2_SSERR | + AR5K_SISR2_DPERR | + AR5K_SISR2_MCABT))) + *interrupt_mask |= AR5K_INT_FATAL; + + if (data & AR5K_ISR_TIM) + *interrupt_mask |= AR5K_INT_TIM; + + if (data & AR5K_ISR_BCNMISC) { + if (sisr2 & AR5K_SISR2_TIM) + *interrupt_mask |= AR5K_INT_TIM; + if (sisr2 & AR5K_SISR2_DTIM) + *interrupt_mask |= AR5K_INT_DTIM; + if (sisr2 & AR5K_SISR2_DTIM_SYNC) + *interrupt_mask |= AR5K_INT_DTIM_SYNC; + if (sisr2 & AR5K_SISR2_BCN_TIMEOUT) + *interrupt_mask |= AR5K_INT_BCN_TIMEOUT; + if (sisr2 & AR5K_SISR2_CAB_TIMEOUT) + *interrupt_mask |= AR5K_INT_CAB_TIMEOUT; + } + + if (data & AR5K_ISR_RXDOPPLER) + *interrupt_mask |= AR5K_INT_RX_DOPPLER; + if (data & AR5K_ISR_QCBRORN) { + *interrupt_mask |= AR5K_INT_QCBRORN; + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR3), + AR5K_SISR3_QCBRORN); + } + if (data & AR5K_ISR_QCBRURN) { + *interrupt_mask |= AR5K_INT_QCBRURN; + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR3), + AR5K_SISR3_QCBRURN); + } + if (data & AR5K_ISR_QTRIG) { + *interrupt_mask |= AR5K_INT_QTRIG; + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR4), + AR5K_SISR4_QTRIG); + } + + if (data & AR5K_ISR_TXOK) + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR0), + AR5K_SISR0_QCU_TXOK); + + if (data & AR5K_ISR_TXDESC) + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR0), + AR5K_SISR0_QCU_TXDESC); + + if (data & AR5K_ISR_TXERR) + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR1), + AR5K_SISR1_QCU_TXERR); + + if (data & AR5K_ISR_TXEOL) + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR1), + AR5K_SISR1_QCU_TXEOL); + + if (data & AR5K_ISR_TXURN) + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR2), + AR5K_SISR2_QCU_TXURN); + } else { + if (unlikely(data & (AR5K_ISR_SSERR | AR5K_ISR_MCABT + | AR5K_ISR_HIUERR | AR5K_ISR_DPERR))) + *interrupt_mask |= AR5K_INT_FATAL; + + /* + * XXX: BMISS interrupts may occur after association. + * I found this on 5210 code but it needs testing. If this is + * true we should disable them before assoc and re-enable them + * after a successfull assoc + some jiffies. + interrupt_mask &= ~AR5K_INT_BMISS; + */ + } /* * In case we didn't handle anything, * print the register value. */ if (unlikely(*interrupt_mask == 0 && net_ratelimit())) - ATH5K_PRINTF("0x%08x\n", data); + ATH5K_PRINTF("ISR: 0x%08x IMR: 0x%08x\n", data, ah->ah_imr); return 0; } @@ -560,14 +623,17 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) { enum ath5k_int old_mask, int_mask; + old_mask = ah->ah_imr; + /* * Disable card interrupts to prevent any race conditions - * (they will be re-enabled afterwards). + * (they will be re-enabled afterwards if AR5K_INT GLOBAL + * is set again on the new mask). */ - ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); - ath5k_hw_reg_read(ah, AR5K_IER); - - old_mask = ah->ah_imr; + if (old_mask & AR5K_INT_GLOBAL) { + ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); + } /* * Add additional, chipset-dependent interrupt mask flags @@ -575,30 +641,64 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) */ int_mask = new_mask & AR5K_INT_COMMON; - if (new_mask & AR5K_INT_RX) - int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN | - AR5K_IMR_RXDESC; - - if (new_mask & AR5K_INT_TX) - int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC | - AR5K_IMR_TXURN; - if (ah->ah_version != AR5K_AR5210) { + /* Preserve per queue TXURN interrupt mask */ + u32 simr2 = ath5k_hw_reg_read(ah, AR5K_SIMR2) + & AR5K_SIMR2_QCU_TXURN; + if (new_mask & AR5K_INT_FATAL) { int_mask |= AR5K_IMR_HIUERR; - AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT | - AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR); + simr2 |= (AR5K_SIMR2_MCABT | AR5K_SIMR2_SSERR + | AR5K_SIMR2_DPERR); } + + /*Beacon Not Ready*/ + if (new_mask & AR5K_INT_BNR) + int_mask |= AR5K_INT_BNR; + + if (new_mask & AR5K_INT_TIM) + int_mask |= AR5K_IMR_TIM; + + if (new_mask & AR5K_INT_TIM) + simr2 |= AR5K_SISR2_TIM; + if (new_mask & AR5K_INT_DTIM) + simr2 |= AR5K_SISR2_DTIM; + if (new_mask & AR5K_INT_DTIM_SYNC) + simr2 |= AR5K_SISR2_DTIM_SYNC; + if (new_mask & AR5K_INT_BCN_TIMEOUT) + simr2 |= AR5K_SISR2_BCN_TIMEOUT; + if (new_mask & AR5K_INT_CAB_TIMEOUT) + simr2 |= AR5K_SISR2_CAB_TIMEOUT; + + if (new_mask & AR5K_INT_RX_DOPPLER) + int_mask |= AR5K_IMR_RXDOPPLER; + + /* Note: Per queue interrupt masks + * are set via reset_tx_queue (qcu.c) */ + ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); + ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2); + + } else { + if (new_mask & AR5K_INT_FATAL) + int_mask |= (AR5K_IMR_SSERR | AR5K_IMR_MCABT + | AR5K_IMR_HIUERR | AR5K_IMR_DPERR); + + ath5k_hw_reg_write(ah, int_mask, AR5K_IMR); } - ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); + /* If RXNOFRM interrupt is masked disable it + * by setting AR5K_RXNOFRM to zero */ + if (!(new_mask & AR5K_INT_RXNOFRM)) + ath5k_hw_reg_write(ah, 0, AR5K_RXNOFRM); /* Store new interrupt mask */ ah->ah_imr = new_mask; - /* ..re-enable interrupts */ - ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); - ath5k_hw_reg_read(ah, AR5K_IER); + /* ..re-enable interrupts if AR5K_INT_GLOBAL is set */ + if (new_mask & AR5K_INT_GLOBAL) { + ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); + } return old_mask; } diff --git a/drivers/net/wireless/ath5k/qcu.c b/drivers/net/wireless/ath5k/qcu.c index 01bf091..1b7bc50 100644 --- a/drivers/net/wireless/ath5k/qcu.c +++ b/drivers/net/wireless/ath5k/qcu.c @@ -432,13 +432,30 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE) AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue); + if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRORNINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrorn, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRURNINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrurn, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_QTRIGINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_qtrig, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_nofrm, queue); /* Update secondary interrupt mask registers */ + + /* Filter out inactive queues */ ah->ah_txq_imr_txok &= ah->ah_txq_status; ah->ah_txq_imr_txerr &= ah->ah_txq_status; ah->ah_txq_imr_txurn &= ah->ah_txq_status; ah->ah_txq_imr_txdesc &= ah->ah_txq_status; ah->ah_txq_imr_txeol &= ah->ah_txq_status; + ah->ah_txq_imr_cbrorn &= ah->ah_txq_status; + ah->ah_txq_imr_cbrurn &= ah->ah_txq_status; + ah->ah_txq_imr_qtrig &= ah->ah_txq_status; + ah->ah_txq_imr_nofrm &= ah->ah_txq_status; ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok, AR5K_SIMR0_QCU_TXOK) | @@ -448,8 +465,24 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) AR5K_SIMR1_QCU_TXERR) | AR5K_REG_SM(ah->ah_txq_imr_txeol, AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1); - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn, - AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2); + /* Update simr2 but don't overwrite rest simr2 settings */ + AR5K_REG_DISABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_QCU_TXURN); + AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, + AR5K_REG_SM(ah->ah_txq_imr_txurn, + AR5K_SIMR2_QCU_TXURN)); + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_cbrorn, + AR5K_SIMR3_QCBRORN) | + AR5K_REG_SM(ah->ah_txq_imr_cbrurn, + AR5K_SIMR3_QCBRURN), AR5K_SIMR3); + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_qtrig, + AR5K_SIMR4_QTRIG), AR5K_SIMR4); + /* Set TXNOFRM_QCU for the queues with TXNOFRM enabled */ + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_nofrm, + AR5K_TXNOFRM_QCU), AR5K_TXNOFRM); + /* No queue has TXNOFRM enabled, disable the interrupt + * by setting AR5K_TXNOFRM to zero */ + if (ah->ah_txq_imr_nofrm == 0) + ath5k_hw_reg_write(ah, 0, AR5K_TXNOFRM); } return 0; diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h index e557fe1..5e20495 100644 --- a/drivers/net/wireless/ath5k/reg.h +++ b/drivers/net/wireless/ath5k/reg.h @@ -234,6 +234,7 @@ #define AR5K_TXNOFRM 0x004c #define AR5K_TXNOFRM_M 0x000003ff #define AR5K_TXNOFRM_QCU 0x000ffc00 +#define AR5K_TXNOFRM_QCU_S 9 /* * Receive frame gap timeout register @@ -350,7 +351,7 @@ #define AR5K_SISR3 0x0090 /* Register Address [5211+] */ #define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ -#define AR5K_SISR3_QCBORN_S 0 +#define AR5K_SISR3_QCBRORN_S 0 #define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ #define AR5K_SISR3_QCBRURN_S 16 diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c index 8f18868..6fdee89 100644 --- a/drivers/net/wireless/ath5k/reset.c +++ b/drivers/net/wireless/ath5k/reset.c @@ -872,8 +872,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, /* Pre-enable interrupts on 5211/5212*/ if (ah->ah_version != AR5K_AR5210) - ath5k_hw_set_imr(ah, AR5K_INT_RX | AR5K_INT_TX | - AR5K_INT_FATAL); + ath5k_hw_set_imr(ah, ah->ah_imr); /* * Set RF kill flags if supported by the device (read from the EEPROM) -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html