Search Linux Wireless

Re: [PATCH v2 00/50] wilc1000: rework tx path to use sk_buffs throughout

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/12/21 06:44, David Mosberger-Tang wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> OK, so I'm nervous about such a large patch series, but it took a lot
> of work to break things down into atomic changes.  This should be it
> for the transmit path as far as I'm concerned.


Thanks David for the efforts to break down the changes. I am still 
reviewing and testing the previous series and found some inconsistent 
results. I am not sure about the cause of the difference. For some 
tests, the throughput is improved(~1Mbps) but for some CI tests, the 
throughput is less compared(~1Mbps in same range) to the previous. 
Though not observed much difference.

Now the new patches are added to the same series so it is difficult to 
review them in one go.

I have a request, incase there are new patches please include them in 
separate series. Breaking down the patch helps to identify the non 
related changes which can go in separate series. The patches(change) may 
be related to TX path flow but can go in separate series.


Regards,
Ajay





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux