Wen Gong <quic_wgong@xxxxxxxxxxx> wrote: > When scan request on channel 1, it also receive beacon from other > channels, and the beacon also indicate to mac80211 and wpa_supplicant, > and then the bss info appears in radio measurement report of radio > measurement sent from wpa_supplicant, thus lead RRM case fail. > > This is to drop the beacon and probe response which is not the same > channel of scanning. > > Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 > > Signed-off-by: Wen Gong <quic_wgong@xxxxxxxxxxx> > Reported-by: kernel test robot <lkp@xxxxxxxxx> Fails to apply: error: patch failed: drivers/net/wireless/ath/ath10k/wmi.c:2610 error: drivers/net/wireless/ath/ath10k/wmi.c: patch does not apply stg import: Diff does not apply cleanly Patch set to Changes Requested. -- https://patchwork.kernel.org/project/linux-wireless/patch/20211026025114.26313-1-quic_wgong@xxxxxxxxxxx/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
