On Tue, 16 Nov 2021 22:30:57 +0530, Anilkumar Kolli wrote: > Ath11k driver supports PCI devices such as QCN9074/QCA6390. > Ath11k firmware uses host DDR memory. DT entry is used to reserve > these host DDR memory regions, send these memory base > addresses using DT entries. > > Signed-off-by: Anilkumar Kolli <akolli@xxxxxxxxxxxxxx> > --- > V2: > - Use reserved-memory (Rob) > > .../bindings/net/wireless/qcom,ath11k.yaml | 48 ++++++++++++++++++++++ > 1 file changed, 48 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:160.13-31: Warning (reg_format): /example-0/pcie0_rp:reg: property has invalid length (20 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:164.17-36: Warning (reg_format): /example-0/pcie0_rp/ath11k@0:reg: property has invalid length (20 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:170.13-31: Warning (reg_format): /example-0/pcie1_rp:reg: property has invalid length (20 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:174.17-36: Warning (reg_format): /example-0/pcie1_rp/ath11k@1:reg: property has invalid length (20 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:138.16-141.11: Warning (unit_address_vs_reg): /example-0/memory: node has a reg or ranges property, but no unit name Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:159.28-167.11: Warning (unit_address_vs_reg): /example-0/pcie0_rp: node has a reg or ranges property, but no unit name Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:169.28-177.11: Warning (unit_address_vs_reg): /example-0/pcie1_rp: node has a reg or ranges property, but no unit name Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:163.32-166.15: Warning (avoid_default_addr_size): /example-0/pcie0_rp/ath11k@0: Relying on default #address-cells value Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:163.32-166.15: Warning (avoid_default_addr_size): /example-0/pcie0_rp/ath11k@0: Relying on default #size-cells value Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:173.32-176.15: Warning (avoid_default_addr_size): /example-0/pcie1_rp/ath11k@1: Relying on default #address-cells value Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:173.32-176.15: Warning (avoid_default_addr_size): /example-0/pcie1_rp/ath11k@1: Relying on default #size-cells value Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: reserved-memory: qcn9074_pcie0@51100000:reg:0: [0, 1360003072, 0, 55574528] is too long From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: reserved-memory: qcn9074_pcie1@54600000:reg:0: [0, 1415577600, 0, 55574528] is too long From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1555958 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
