Search Linux Wireless

RE: [PATCH v7 00/24] rtw89: add Realtek 802.11ax driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: kvalo=codeaurora.org@xxxxxxxxxxxxxxxxx <kvalo=codeaurora.org@xxxxxxxxxxxxxxxxx> On
> Behalf Of Kalle Valo
> Sent: Wednesday, October 13, 2021 2:09 PM
> To: Pkshih <pkshih@xxxxxxxxxxx>
> Cc: linux-wireless@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v7 00/24] rtw89: add Realtek 802.11ax driver
> 
> Pkshih <pkshih@xxxxxxxxxxx> writes:
> 
> >> -----Original Message-----
> >> From: kvalo=codeaurora.org@xxxxxxxxxxxxxxxxx
> >> <kvalo=codeaurora.org@xxxxxxxxxxxxxxxxx> On
> >> Behalf Of Kalle Valo
> >> Sent: Monday, October 11, 2021 8:07 PM
> >> To: Pkshih <pkshih@xxxxxxxxxxx>
> >> Cc: linux-wireless@xxxxxxxxxxxxxxx
> >> Subject: Re: [PATCH v7 00/24] rtw89: add Realtek 802.11ax driver
> >>
> >> Kalle Valo <kvalo@xxxxxxxxxxxxxx> writes:
> >>
> >> > Ping-Ke Shih <pkshih@xxxxxxxxxxx> writes:
> >> >
> >> >> This driver named rtw89, which is the next generation of rtw88, supports
> >> >> Realtek 8852AE 802.11ax 2x2 chip whose new features are OFDMA, DBCC,
> >> >> Spatial reuse, TWT and BSS coloring; now some of them aren't implemented
> >> >> though.
> >> >>
> >> >> The chip architecture is entirely different from the chips supported by
> >> >> rtw88 like RTL8822CE 802.11ac chip. First of all, register address ranges
> >> >> are totally redefined, so it's impossible to reuse register definition. To
> >> >> communicate with firmware, new H2C/C2H format is proposed. In order to have
> >> >> better utilization, TX DMA flow is changed to two stages DMA. To provide
> >> >> rich RX status information, additional RX PPDU packets are added.
> >> >>
> >> >> Since there are so many differences mentioned above, we decide to propose
> >> >> a new driver. It has many authors, they are listed in alphabetic order:
> >> >>
> >> >> Chin-Yen Lee <timlee@xxxxxxxxxxx>
> >> >> Ping-Ke Shih <pkshih@xxxxxxxxxxx>
> >> >> Po Hao Huang <phhuang@xxxxxxxxxxx>
> >> >> Tzu-En Huang <tehuang@xxxxxxxxxxx>
> >> >> Vincent Fann <vincent_fann@xxxxxxxxxxx>
> >> >> Yan-Hsuan Chuang <tony0620emma@xxxxxxxxx>
> >> >> Zong-Zhe Yang <kevin_yang@xxxxxxxxxxx>
> >> >>
> >> >> Tested-by: Brian Norris <briannorris@xxxxxxxxxxxx>
> >> >> Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
> >> >>
> >> >> v7:
> >> >>   - use consistent license of Kconfig
> >> >>   - remove #ifdef and dummy functions from coex.c
> >> >>   - C2H handler of coex uses meaningful naming insetad, and use le32_to_cpu()
> >> >>     to convert the value.
> >> >>   - add icmp packet notify to coex
> >> >>   - use function call instead of a work to notify coex about traffic changed
> >> >>   - fix dereference security CAM NULL pointer while disconnecting occasionally
> >> >>   - fill tx descriptor once a 32 bits word (Suggested by Arnd. Thanks!)
> >> >>   - use static pci PS, so remove pci link_ps
> >> >>   - make many mac tables constant
> >> >>   - add early_h2c debugfs entry to notify firmware early
> >> >>   - support new RA report format
> >> >>   - configure retry_lowest_rate by band
> >> >>   - avoid to use of whil(1) to parse power sequence
> >> >>   - notify rfk before/after scanning to reset status
> >> >>   - firmware: rtw89: 8852a: update fw to v0.13.30.0
> >> >>     https://github.com/pkshih/linux-firmware.git
> >> >>     pick the commit 6595133a7cde82be932067afde834dcd036167f8
> >> >
> >> > I have not reviewed this version yet, but I pushed it to the pending
> >> > branch for build testing:
> >> >
> >> >
> >>
> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git/commit/?h=
> >> pending&id=c321740f93af1a31d9e149ce5077e28bd4e859f7
> >> >
> >> > For the final commit my plan is to squash all patches into one big
> >> > patch. I will do that after reviewing v7, if everything is ok of course.
> >> >
> >> > Are there more Tested-by or Reviewed-by tags?
> >
> > Sorry for the late reply. Because our National Day is Oct. 10th, and
> > additional holiday on Oct. 11th.
> >
> > Aaron have tested v5 and a tag is given [1].
> >
> > Tested-by: Aaron Ma <aaron.ma@xxxxxxxxxxxxx>
> 
> I added Aaron to the commit log and pushed the driver to the master
> branch:
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git/commit/?id
> =e3ec7017f6a20d12ddd9fe23d345ebb7b8c104dd
> 
> So the driver is now officially accepted, a big thank you to everyone
> who participated with the review and testing! Now let's see what kind of
> reports we get from linux-next.
> 

Thank you!

Should I add myself to the file MAINTAINERS?

--
Ping-Ke




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux