From: Wen Gong <wgong@xxxxxxxxxxxxxx>
Scan failure can not be recovered from when running a loop of the
following steps:
1. run scan: "iw wlan scan".
2. run command: echo assert > /sys/kernel/debug/ath11k/qca6490\ hw2.0/simulate_fw_crash
immediately after step 1.
result:
scan failed and can not recover even when wlan recovery succeeds:
command failed: Device or resource busy (-16)
reason:
When scan arrives, WMI_START_SCAN_CMDID is sent to the firmware and
function ath11k_mac_op_hw_scan() returns, then simulate_fw_crash arrives
and the scan started event does not arrive, and then it starts to do
recovery of wlan. __ath11k_mac_scan_finish() which is called from
ath11k_core_halt() is one step of recovery, it will not call
ieee80211_scan_completed() by logic currently because the scan state is
ATH11K_SCAN_STARTING. Thus it leads the scan not being completed in
mac80211, and leads all consecutive scans failing with -EBUSY in
nl80211_trigger_scan even after wlan recovery success.
Indicate scan complete with aborted flag to mac80211 for
ATH11K_SCAN_STARTING to allow recovery from scan failed with "Device or
resource busy (-16)" after wlan recovery.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Wen Gong <wgong@xxxxxxxxxxxxxx>
Signed-off-by: Jouni Malinen <jouni@xxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath11k/mac.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 97a2c92b7b9b..e015b22b8dbf 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2985,18 +2985,21 @@ void __ath11k_mac_scan_finish(struct ath11k *ar)
break;
case ATH11K_SCAN_RUNNING:
case ATH11K_SCAN_ABORTING:
+ if (ar->scan.is_roc && ar->scan.roc_notify)
+ ieee80211_remain_on_channel_expired(ar->hw);
+ fallthrough;
+ case ATH11K_SCAN_STARTING:
if (!ar->scan.is_roc) {
struct cfg80211_scan_info info = {
- .aborted = (ar->scan.state ==
- ATH11K_SCAN_ABORTING),
+ .aborted = ((ar->scan.state ==
+ ATH11K_SCAN_ABORTING) ||
+ (ar->scan.state ==
+ ATH11K_SCAN_STARTING)),
};
ieee80211_scan_completed(ar->hw, &info);
- } else if (ar->scan.roc_notify) {
- ieee80211_remain_on_channel_expired(ar->hw);
}
- fallthrough;
- case ATH11K_SCAN_STARTING:
+
ar->scan.state = ATH11K_SCAN_IDLE;
ar->scan_channel = NULL;
ar->scan.roc_freq = 0;
--
2.25.1
