From: Wen Gong <wgong@xxxxxxxxxxxxxx> When wlan interface is up, 11d scan is sent to the firmware, and the firmware needs to spend couple of seconds to complete the 11d scan. If immediately a normal scan from user space arrives to ath11k, then the normal scan request is also sent to the firmware, but the scan started event will be reported to ath11k until the 11d scan complete. When timed out for the scan started in ath11k, ath11k stops the normal scan and the firmware reports WMI_SCAN_EVENT_DEQUEUED to ath11k for the normal scan. ath11k has no handler for the event and then timed out for the scan completed in ath11k_scan_stop(), and ath11k prints the following error message. [ 1491.604750] ath11k_pci 0000:02:00.0: failed to receive scan abort comple: timed out [ 1491.604756] ath11k_pci 0000:02:00.0: failed to stop scan: -110 [ 1491.604758] ath11k_pci 0000:02:00.0: failed to start hw scan: -110 Add a handler for WMI_SCAN_EVENT_DEQUEUED and then complete the scan to get rid of the above error message. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <wgong@xxxxxxxxxxxxxx> Signed-off-by: Jouni Malinen <jouni@xxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath11k/wmi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c index ec46e06aace9..d11022455d97 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.c +++ b/drivers/net/wireless/ath/ath11k/wmi.c @@ -6370,6 +6370,8 @@ static void ath11k_scan_event(struct ath11k_base *ab, struct sk_buff *skb) ath11k_wmi_event_scan_start_failed(ar); break; case WMI_SCAN_EVENT_DEQUEUED: + __ath11k_mac_scan_finish(ar); + break; case WMI_SCAN_EVENT_PREEMPTED: case WMI_SCAN_EVENT_RESTARTED: case WMI_SCAN_EVENT_FOREIGN_CHAN_EXIT: -- 2.25.1
