Search Linux Wireless

Re: Current mainline brcmfmac reports error on supposedly supported ap6256 chip

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Arend,

pls find dmesg with extra prints you proposed:

[  144.634234] brcmfmac: brcmfmac_module_init No platform data available.
[  144.638974] brcmfmac: brcmf_sdio_probe Enter
[  144.643057] brcmfmac: F1 signature read @0x18000000=0x15294345
[  144.648718] brcmfmac: brcmf_chip_recognition found AXI chip: BCM4345/9
[  144.656662] brcmfmac: brcmf_chip_cores_check  [1 ] core 0x800:51 base 0x18000000 wrap 0x18100000
[  144.663690] brcmfmac: brcmf_chip_cores_check  [2 ] core 0x812:54 base 0x18001000 wrap 0x18101000
[  144.672346] brcmfmac: brcmf_chip_cores_check  [3 ] core 0x83e:9  base 0x18002000 wrap 0x18102000
[  144.681031] brcmfmac: brcmf_chip_cores_check  [4 ] core 0x83c:14 base 0x18003000 wrap 0x18103000
[  144.689683] brcmfmac: brcmf_chip_cores_check  [5 ] core 0x829:21 base 0x18004000 wrap 0x18104000
[  144.698365] brcmfmac: brcmf_chip_cores_check  [6 ] core 0x135:0  base 0x00000000 wrap 0x18107000
[  144.707019] brcmfmac: brcmf_chip_cores_check  [7 ] core 0x240:0  base 0x00000000 wrap 0x00000000
[  144.715678] brcmfmac: brcmf_chip_set_passive Enter
[  144.722499] brcmfmac: brcmf_chip_tcm_ramsize: up 0 corecap 0 nab 0 nbb 0
[  144.727030] brcmfmac: brcmf_chip_get_raminfo RAM: base=0x198000 size=0 (0x0) sr=0 (0x0)
[  144.734989] brcmfmac: brcmf_chip_get_raminfo: RAM size is undetermined
[  144.741450] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed!
[  144.748099] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed
[  144.754610] brcmfmac: brcmf_sdio_remove Enter
[  144.758869] brcmfmac: brcmf_detach Enter
[  144.762804] brcmfmac: brcmf_sdio_remove Disconnected
[  144.767760] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19...
[  144.774615] usbcore: registered new interface driver brcmfmac


DT i'm using: https://pastebin.com/yHAb6gn3



> Wiadomość napisana przez Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx> w dniu 26.07.2021, o godz. 09:54:
> 
> + linux-wireless, + Ondrej (who added support for 4345 rev 9)
> 
> On 7/25/2021 12:16 AM, Piotr Oniszczuk wrote:
>>> Wiadomość napisana przez Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx> w dniu 24.07.2021, o godz. 23:20:
>>> 
>>> 
>>> I am not so sure what is going on so maybe you can apply the patch below and see what comes out.
>>> 
>>> Regards,
>>> Arend
>>> 
>>> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
>>> index 4faab0170ffa..71fb34753528 100644
>>> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
>>> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
>>> @@ -691,9 +691,11 @@ static u32 brcmf_chip_tcm_ramsize(struct brcmf_core_priv *cr4)
>>>        nbb = (corecap & ARMCR4_TCBBNB_MASK) >> ARMCR4_TCBBNB_SHIFT;
>>>        totb = nab + nbb;
>>> 
>>> +       brcmf_err("corecap %x nab %u nbb %u\n", corecap, nab, nbb);
>>>        for (idx = 0; idx < totb; idx++) {
>>>                brcmf_chip_core_write32(cr4, ARMCR4_BANKIDX, idx);
>>>                bxinfo = brcmf_chip_core_read32(cr4, ARMCR4_BANKINFO);
>>> +               brcmf_err("[%3u] %08x\n", idx, bxinfo);
>>>                memsize += ((bxinfo & ARMCR4_BSZ_MASK) + 1) * ARMCR4_BSZ_MULT;
>>>        }
>>> 
>>> 
>> Arend
>> Pls find dmesg output with patch:
>> [  121.226458] brcmfmac: brcmfmac_module_init No platform data available.
>> [  121.227955] brcmfmac: brcmf_sdio_probe Enter
>> [  121.232119] brcmfmac: F1 signature read @0x18000000=0x15294345
>> [  121.237659] brcmfmac: brcmf_chip_recognition found AXI chip: BCM4345/9
>> [  121.245832] brcmfmac: brcmf_chip_cores_check  [1 ] core 0x800:51 base 0x18000000 wrap 0x18100000
>> [  121.252695] brcmfmac: brcmf_chip_cores_check  [2 ] core 0x812:54 base 0x18001000 wrap 0x18101000
>> [  121.261363] brcmfmac: brcmf_chip_cores_check  [3 ] core 0x83e:9  base 0x18002000 wrap 0x18102000
>> [  121.270071] brcmfmac: brcmf_chip_cores_check  [4 ] core 0x83c:14 base 0x18003000 wrap 0x18103000
>> [  121.278783] brcmfmac: brcmf_chip_cores_check  [5 ] core 0x829:21 base 0x18004000 wrap 0x18104000
>> [  121.287508] brcmfmac: brcmf_chip_cores_check  [6 ] core 0x135:0  base 0x00000000 wrap 0x18107000
>> [  121.296206] brcmfmac: brcmf_chip_cores_check  [7 ] core 0x240:0  base 0x00000000 wrap 0x00000000
>> [  121.304917] brcmfmac: brcmf_chip_set_passive Enter
>> [  121.312079] brcmfmac: brcmf_chip_tcm_ramsize: corecap 0 nab 0 nbb 0
> 
> Well. That explains the fact that RAM size ends up being zero. I want to be sure the ARM CR4 core is up so can you retry using the patch below. It is just getting bit more info, no fix.
> 
> Regards,
> Arend
> 
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
> index 4faab0170ffa..b829ad2f3865 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
> @@ -691,9 +691,12 @@ static u32 brcmf_chip_tcm_ramsize(struct brcmf_core_priv *cr4)
>        nbb = (corecap & ARMCR4_TCBBNB_MASK) >> ARMCR4_TCBBNB_SHIFT;
>        totb = nab + nbb;
> 
> +       brcmf_err("up %d corecap %x nab %u nbb %u\n",
> +               brcmf_chip_iscoreup(&cr4->pub), corecap, nab, nbb);
>        for (idx = 0; idx < totb; idx++) {
>                brcmf_chip_core_write32(cr4, ARMCR4_BANKIDX, idx);
>                bxinfo = brcmf_chip_core_read32(cr4, ARMCR4_BANKINFO);
> +               brcmf_err("[%3u] %08x\n", idx, bxinfo);
>                memsize += ((bxinfo & ARMCR4_BSZ_MASK) + 1) * ARMCR4_BSZ_MULT;
>        }
> 





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux