WMI_CHAN_INFO_DFS_FREQ2 needs to be set in wmi vdev start command chan info parameter, to enable radar detection for secondary segment in 160MHz. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01717-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lavanya Suresh <lavaks@xxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath11k/mac.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index 893d74a..8dae097 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -5757,13 +5757,14 @@ ath11k_mac_vdev_start_restart(struct ath11k_vif *arvif, arg.channel.chan_radar = !!(chandef->chan->flags & IEEE80211_CHAN_RADAR); + arg.channel.freq2_radar = + !!(chandef->chan->flags & IEEE80211_CHAN_RADAR); + arg.channel.passive = arg.channel.chan_radar; spin_lock_bh(&ab->base_lock); arg.regdomain = ar->ab->dfs_region; spin_unlock_bh(&ab->base_lock); - - /* TODO: Notify if secondary 80Mhz also needs radar detection */ } arg.channel.passive |= !!(chandef->chan->flags & IEEE80211_CHAN_NO_IR); -- 2.7.4
