Number of Sounding dimensions config received from firmware for
bandwidth above 80MHz is cleared, and proper value is not set again.
So not resetting it to accept the config from firmware.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01689-QCAHKSWPL_SILICONZ-1
Signed-off-by: Lavanya Suresh <lavaks@xxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath11k/mac.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 5e5026c..61c166e 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -4604,8 +4604,6 @@ static int ath11k_mac_copy_he_cap(struct ath11k *ar,
he_cap_elem->phy_cap_info[5] &=
~IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK;
- he_cap_elem->phy_cap_info[5] &=
- ~IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_MASK;
he_cap_elem->phy_cap_info[5] |= ar->num_tx_chains - 1;
switch (i) {
--
2.7.4
