This patch calls wcn36xx_smd_keep_alive_req() on the STA patch immediately
after associating with an AP.
This will cause the firmware to send a NULL packet out to the AP every 30
seconds, thus offloading keep-alive processing from the SoC to the
firmware.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
drivers/net/wireless/ath/wcn36xx/main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index e924cc4acde0..5867bd9c2f64 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -910,6 +910,7 @@ static void wcn36xx_bss_info_changed(struct ieee80211_hw *hw,
* place where AID is available.
*/
wcn36xx_smd_config_sta(wcn, vif, sta);
+ wcn36xx_enable_keep_alive_null_packet(wcn, vif);
} else {
wcn36xx_dbg(WCN36XX_DBG_MAC,
"disassociated bss %pM vif %pM AID=%d\n",
--
2.28.0
