Venkateswara Naralasetty <vnaralas@xxxxxxxxxxxxxx> writes: > Adding raw mode tx/rx support. Also, adding support > for software crypto which depends on raw mode. > > To enable raw mode tx/rx: > insmod ath11k.ko frame_mode=0 > > To enable software crypto: > insmod ath11k.ko crypto_mode=1 > > These modes could be helpful in debugging crypto related issues. > > Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 > > Signed-off-by: Manikanta Pubbisetty <mpubbise@xxxxxxxxxxxxxx> > Signed-off-by: Venkateswara Naralasetty <vnaralas@xxxxxxxxxxxxxx> [...] > --- a/drivers/net/wireless/ath/ath11k/wmi.c > +++ b/drivers/net/wireless/ath/ath11k/wmi.c > @@ -3366,6 +3366,10 @@ int ath11k_wmi_cmd_init(struct ath11k_base *ab) > config.rx_timeout_pri[2] = TARGET_RX_TIMEOUT_LO_PRI; > config.rx_timeout_pri[3] = TARGET_RX_TIMEOUT_HI_PRI; > config.rx_decap_mode = TARGET_DECAP_MODE_NATIVE_WIFI; > + > + if (test_bit(ATH11K_FLAG_RAW_MODE, &ab->dev_flags)) > + config.rx_decap_mode = TARGET_DECAP_MODE_RAW; Did you test this at all? Because to me it looks like in ath11k_init_wmi_config_ipq8074() this is overwritten with: config->rx_decap_mode = TARGET_DECAP_MODE_NATIVE_WIFI; So I can't see how this would even work. I noticed this while I was cleaning up ath11k_wmi_cmd_init(). I'll send a patch soon, please test that and let me know if it works. -- https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
