On 8/20/20 1:15 PM, Krishna Chaitanya wrote:
On Thu, Aug 20, 2020 at 11:23 PM Ben Greear <greearb@xxxxxxxxxxxxxxx> wrote:
On 8/20/20 10:42 AM, Krishna Chaitanya wrote:
On Thu, Aug 20, 2020 at 11:11 PM Krishna Chaitanya
<chaitanya.mgit@xxxxxxxxx> wrote:
On Thu, Aug 20, 2020 at 10:38 PM Ben Greear <greearb@xxxxxxxxxxxxxxx> wrote:
On 8/20/20 10:00 AM, Krishna Chaitanya wrote:
On Thu, Aug 20, 2020 at 10:02 PM Ben Greear <greearb@xxxxxxxxxxxxxxx> wrote:
On 8/20/20 9:08 AM, Krishna Chaitanya wrote:
On Thu, Aug 20, 2020 at 8:07 PM Wen Gong <wgong@xxxxxxxxxxxxxx> wrote:
On 2020-08-20 18:52, Krishna Chaitanya wrote:
On Thu, Aug 20, 2020 at 3:45 PM Wen Gong <wgong@xxxxxxxxxxxxxx> wrote:
On 2020-08-20 17:19, Krishna Chaitanya wrote:
...
I'm not really convinced that this is the right fix, but I'm no NAPI
expert. Can anyone else help?
Calling napi_disable() twice can lead to hangs, but moving NAPI from
start/stop to
the probe isn't the right approach as the datapath is tied to
start/stop.
Maybe check the state of NAPI before disable?
if (test_bit(NAPI_STATE_SCHED, &ar->napi.napi.state))
napi_disable(&ar->napi)
or maintain napi_state like this
https://patchwork.kernel.org/patch/10249365/
it is better to use above link's patch.
napi.state is controlled by napi API, it is better ath10k not know it.
Sure, but IMHO just canceling the async rx work should solve the issue.
Oh no, canceling the async rx work will not solve this issue, rx worker
ath10k_rx_indication_async_work call napi_schedule, after napi_complete,
the NAPI_STATE_SCHED will clear.
The issue of this patch is because 2 thread called to hif_stop and
NAPI_STATE_SCHED not clear.
That fix is still valid and good to have.
ndev_stop being called twice is typical scenarios (stop vs rmmod), so
just checking the netdev_flags for IFF_UP and returning from hif_Stop
should suffice, no?
My approach to fix this problem was to add a boolean in ath10k as to whether
it had napi enabled or not, and then check that before trying to enable/disable
it again. Seems to work fine, and cleaner in my mind than checking internal
napi flags.
A much simpler approach is just to check for IFF_UP and skip NAPI (and others)
in the hif_stop no? (provided proper RTNL locking is done if hif_stop
is being called
internally as well).
I'm not sure, but I think the driver should be internally consistent and not
spend a lot of time trying to guess about interactions with objects higher
in the stack.
Fair enough, the network interface state is a basic thing controlled
by the driver,
so, should be okay to use. Anyways, the in-driver approach has more control.
Here is my original patch to fix this, it is not complex.
https://patchwork.kernel.org/patch/10249363/
Sure, I have shared your patch above :).
Sent a bit early, any idea why this wasn't upstreamed earlier?
No, one comment from Michal indicated maybe there were more problems lurking
in this area, but he seemed to be OK with the patch over all. After that,
it was just ignored.
Now might be a good time to push for it :)
It is generally a waste of time in my experience. Kalle is the maintainer and should
be seeing any of this he cares to see. If he likes the patch, he can apply it or
something similar. If you have a reproducible test case, see if the patch fixes
things, that might help it be accepted.
Thanks,
Ben
--
Ben Greear <greearb@xxxxxxxxxxxxxxx>
Candela Technologies Inc http://www.candelatech.com
