Add TID specific Tx bitrate configuration by using
handle_bitrates already APIs.
Examples:
$ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates auto
$ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates limit vht-mcs-5 4:9
Signed-off-by: Tamizh Chelvam <tamizhr@xxxxxxxxxxxxxx>
---
bitrate.c | 27 ++++++++++++++++++++-------
interface.c | 34 +++++++++++++++++++++++++++++++++-
iw.h | 3 +++
3 files changed, 56 insertions(+), 8 deletions(-)
diff --git a/bitrate.c b/bitrate.c
index 780017f..32a23a9 100644
--- a/bitrate.c
+++ b/bitrate.c
@@ -76,13 +76,12 @@ static int setup_vht(struct nl80211_txrate_vht *txrate_vht,
#define VHT_ARGC_MAX 100
-static int handle_bitrates(struct nl80211_state *state,
- struct nl_msg *msg,
- int argc, char **argv,
- enum id_input id)
+int set_bitrates(struct nl_msg *msg,
+ int argc, char **argv,
+ enum nl80211_attrs attr)
{
struct nlattr *nl_rates, *nl_band;
- int i;
+ int i, ret = 0;
bool have_legacy_24 = false, have_legacy_5 = false;
uint8_t legacy_24[32], legacy_5[32];
int n_legacy_24 = 0, n_legacy_5 = 0;
@@ -195,10 +194,16 @@ static int handle_bitrates(struct nl80211_state *state,
case S_GI:
break;
default:
+ if (attr != NL80211_ATTR_TX_RATES)
+ goto next;
return 1;
}
}
+next:
+ if (attr != NL80211_ATTR_TX_RATES)
+ ret = i;
+
if (have_vht_mcs_24)
if (!setup_vht(&txrate_vht_24, vht_argc_24, vht_argv_24))
return -EINVAL;
@@ -213,7 +218,7 @@ static int handle_bitrates(struct nl80211_state *state,
if (sgi_24 && lgi_24)
return 1;
- nl_rates = nla_nest_start(msg, NL80211_ATTR_TX_RATES);
+ nl_rates = nla_nest_start(msg, attr);
if (!nl_rates)
goto nla_put_failure;
@@ -253,11 +258,19 @@ static int handle_bitrates(struct nl80211_state *state,
nla_nest_end(msg, nl_rates);
- return 0;
+ return ret;
nla_put_failure:
return -ENOBUFS;
}
+static int handle_bitrates(struct nl80211_state *state,
+ struct nl_msg *msg,
+ int argc, char **argv,
+ enum id_input id)
+{
+ return set_bitrates(msg, argc, argv, NL80211_ATTR_TX_RATES);
+}
+
#define DESCR_LEGACY "[legacy-<2.4|5> <legacy rate in Mbps>*]"
#define DESCR DESCR_LEGACY " [ht-mcs-<2.4|5> <MCS index>*] [vht-mcs-<2.4|5> <NSS:MCSx,MCSy... | NSS:MCSx-MCSy>*] [sgi-2.4|lgi-2.4] [sgi-5|lgi-5]"
diff --git a/interface.c b/interface.c
index df96bed..b55261f 100644
--- a/interface.c
+++ b/interface.c
@@ -757,6 +757,7 @@ static int handle_tid_config(struct nl80211_state *state,
{
struct nlattr *tids_array = NULL;
struct nlattr *tids_entry = NULL;
+ enum nl80211_tx_rate_setting txrate_type;
unsigned char peer[ETH_ALEN];
int tids_num = 0;
char *end;
@@ -920,6 +921,33 @@ static int handle_tid_config(struct nl80211_state *state,
argc -= 2;
argv += 2;
+ } else if (strcmp(argv[0], "bitrates") == 0) {
+ if (argc < 2) {
+ fprintf(stderr, "not enough args for %s\n", argv[0]);
+ return HANDLER_RET_USAGE;
+ }
+ if (!strcmp(argv[1], "auto"))
+ txrate_type = NL80211_TX_RATE_AUTOMATIC;
+ else if (!strcmp(argv[1], "fixed"))
+ txrate_type = NL80211_TX_RATE_FIXED;
+ else if (!strcmp(argv[1], "limit"))
+ txrate_type = NL80211_TX_RATE_LIMITED;
+ else {
+ printf("Invalid parameter: %s\n", argv[0]);
+ return 2;
+ }
+ NLA_PUT_U8(msg, NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE, txrate_type);
+ argc -= 2;
+ argv += 2;
+ if (txrate_type != NL80211_TX_RATE_AUTOMATIC) {
+ ret = set_bitrates(msg, argc, argv,
+ NL80211_TID_CONFIG_ATTR_TX_RATE);
+ if (ret < 2)
+ return 1;
+
+ argc -= ret;
+ argv += ret;
+ }
} else {
fprintf(stderr, "Unknown parameter: %s\n", argv[0]);
return HANDLER_RET_USAGE;
@@ -945,7 +973,9 @@ nla_put_failure:
}
COMMAND(set, tidconf, "[peer <MAC address>] tids <mask> [override] [sretry <num>] [lretry <num>] "
- "[ampdu [on|off]] [amsdu [on|off]] [noack [on|off]] [rtscts [on|off]]",
+ "[ampdu [on|off]] [amsdu [on|off]] [noack [on|off]] [rtscts [on|off]]"
+ "[bitrates <type [auto|fixed|limit]> [legacy-<2.4|5> <legacy rate in Mbps>*] [ht-mcs-<2.4|5> <MCS index>*]"
+ " [vht-mcs-<2.4|5> <NSS:MCSx,MCSy... | NSS:MCSx-MCSy>*] [sgi-2.4|lgi-2.4] [sgi-5|lgi-5]]",
NL80211_CMD_SET_TID_CONFIG, 0, CIB_NETDEV, handle_tid_config,
"Setup per-node TID specific configuration for TIDs selected by bitmask.\n"
"If MAC address is not specified, then supplied TID configuration\n"
@@ -955,4 +985,6 @@ COMMAND(set, tidconf, "[peer <MAC address>] tids <mask> [override] [sretry <num>
" $ iw dev wlan0 tids 0x5 ampdu off amsdu off rtscts on\n"
" $ iw dev wlan0 tids 0x3 override ampdu on noack on rtscts on\n"
" $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x1 ampdu off tids 0x3 amsdu off rtscts on\n"
+ " $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates auto\n"
+ " $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates limit vht-mcs-5 4:9\n"
);
diff --git a/iw.h b/iw.h
index bc0b3ac..46bc9b5 100644
--- a/iw.h
+++ b/iw.h
@@ -245,4 +245,7 @@ void nan_bf(uint8_t idx, uint8_t *bf, uint16_t bf_len, const uint8_t *buf,
char *hex2bin(const char *hex, char *buf);
+int set_bitrates(struct nl_msg *msg, int argc, char **argv,
+ enum nl80211_attrs attr);
+
#endif /* __IW_H */
--
1.9.1
