Search Linux Wireless

RE: [PATCH v2 5/5] rtw88: 8821c: Add 8821CE to Kconfig and Makefile

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> On 6/3/20 4:42 AM, yhchuang@xxxxxxxxxxx wrote:
> > From: Tzu-En Huang <tehuang@xxxxxxxxxxx>
> >
> > Since 8821C code is ready, we can build it.
> >
> > Signed-off-by: Tzu-En Huang <tehuang@xxxxxxxxxxx>
> > Signed-off-by: Yan-Hsuan Chuang <yhchuang@xxxxxxxxxxx>
> 
> I added this code to the rtw88 GitHub repository that I maintain. I do not have
> an 8821CE card and have no way to test it; however, there is at least one user.
> 
> That user has built the driver and gets the firmware loaded, but runs into the
> following:
> 
> [   12.378158] rtw_8821ce 0000:02:00.0: Firmware version 24.5.0, H2C
> version 12
> [   12.404834] rtw_8821ce 0000:02:00.0: rfe 2 isn't supported
> [   12.404937] rtw_8821ce 0000:02:00.0: failed to setup chip efuse info
> [   12.404939] rtw_8821ce 0000:02:00.0: failed to setup chip information
> 

I need to check the devices with RFE type 2. I am not sure if they are supported.
But you can try to add RFE 2 in rtw8821c.c, that can probably work.

Yen-Hsuan




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux