From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
Currently ldo_pwr has the LDO25 voltage bits set to zero and then
it is overwritten with the new voltage setting. The assignment
looks incorrect, it should be bit-wise or'ing in the new voltage
setting rather than a direct assignment.
Addresses-Coverity: ("Unused value")
Fixes: 1afb5eb7a00d ("rtw88: 8723d: Add cfg_ldo25 to control LDO25")
Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtw88/rtw8723d.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8723d.c b/drivers/net/wireless/realtek/rtw88/rtw8723d.c
index b517af417e0e..2c6e417c5bca 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8723d.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8723d.c
@@ -561,7 +561,7 @@ static void rtw8723d_cfg_ldo25(struct rtw_dev *rtwdev, bool enable)
ldo_pwr = rtw_read8(rtwdev, REG_LDO_EFUSE_CTRL + 3);
if (enable) {
ldo_pwr &= ~BIT_MASK_LDO25_VOLTAGE;
- ldo_pwr = (BIT_LDO25_VOLTAGE_V25 << 4) | BIT_LDO25_EN;
+ ldo_pwr |= (BIT_LDO25_VOLTAGE_V25 << 4) | BIT_LDO25_EN;
} else {
ldo_pwr &= ~BIT_LDO25_EN;
}
--
2.25.1
