Hi,
I think there's a little regression somewhere in the driver for the following
device:
lspci -v
01:04.0 Network controller: RaLink RT2561/RT61 802.11g PCI
Subsystem: RaLink Unknown device 2561
Flags: bus master, slow devsel, latency 32, IRQ 10
Memory at d3060000 (32-bit, non-prefetchable) [size=32K]
Capabilities: [40] Power Management version 2
The card has 2 LEDs, link and TX/RX. The latter used to flicker nicely on data
transfer until 2.6.25. With 2.6.26 and 2.6.27-rc1, it's always on.
Configs can be found here:
<http://www-user.tu-chemnitz.de/~stefb/rt61pci_led/2.6.25.13.config>
<http://www-user.tu-chemnitz.de/~stefb/rt61pci_led/2.6.26.config>
<http://www-user.tu-chemnitz.de/~stefb/rt61pci_led/2.6.27-rc1.config>
If any logs are necessary, please tell me.
I would appreciate any hint or patch (against 2.6.26 or .27-rc*), but if there
isn't any clue what could have caused this I could do a bisect, too (but it
could take some time).
Regards,
Stefan
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
